Results for
IMM MASCHINENBAU GMBH
Germany
With frequency converter for variabel cutting speed setting. For belt sanding steel, titanium and other metals.
Request for a quoteBIZERBA SE & CO. KG
Germany
Multi-functional device for strip cutting and tenderizing of meat for trade and industrial continuous operation Multi-functional device can be used as a strip cutter additionally used with tenderising of meat for trade and industrial operations where continuous operation is required. It stands out in terms of performance and precision, reliability and flexibility. Tenderiser and strip cutter for turning fresh meat and cold cuts as well as fruit and vegetables into fine salads and pan-fried meals. With the unique Emotion® drive concept this multi-functional device is energy efficient and easy to handle. It is suitable for continuous operation for automatic product feed lines. Further highlights of the strip cutter are as follows Strip cutting, tenderising and knitting - all using a single device Compact, tilt-proof IP33 protection Cutting sets can be removed with ease for cleaning without the need for tools or threaded connectors Two-part, detachable cutting set for perfect...
Request for a quoteJOKA WERKZEUG- UND MASCHINENBAU GMBH & CO. KG
Germany
Punching units Punching unit with exchangeable cutting elements for sheets and profiles up to a material thickness of 25.0 mm and a hole diameter of 150.0 mm JOKA punching units consist of a special cast stand that accepts the punch and die and ensures the exact axis alignment between the cutting elements (punch and die). In addition, there is a stripping system in the upper part of the tool stand, as the material wipes off automatically after punching. The scraper contains two or more disc spring packages that guarantee perfect scraping even in the border areas. A fixed connection between the tool and the upper part of the press is therefore not required. To determine the exact position, each tool has a positioning pin (two for shaped holes) on the underside, which is precisely aligned with the cutting elements (center of the hole). The above picture shows a complete punching unit without cutting elements and one cutting set (punch and die) each for round hole or shaped hole.
Request for a quoteWEBER FOOD TECHNOLOGY GMBH
Germany
The top models for industrial applications offer the latest technology and highest quality: As robust high performers in industry, the derinders ASB 460, 560 and ASB 770 are shining examples of pioneering technology in premium quality. The automatic initial cut control for rinds developed by Weber, combined with the spring-mounted cutting system ensures a clean initial cut and a high product yield. The new hygienic programme ensures quick and simple cleaning and is included as standard. Advantages Cut widths up to 460 mm Maximum output thanks to fully-automatic product process Minimum reworking of derinded cuts Precision thickness setting from 0-4 mm Options: Can be operated from left or right Product specific pressure devices Special sub-frames (height adjustment) Can be suspended over a shredding belt or on a C frame
Request for a quoteZINSER GMBH
Germany
ZINSER GmbH offers first-class environmental technology solutions to complete your cutting systems. Our extraction and filter systems have been specially developed for applications such as plasma, oxyacetylene and laser cutting and set new standards in filtration performance and productivity. We offer you tailor-made solutions for systematic air purification to maximize the efficiency and safety of your cutting processes. Extraction and filter systems ZINSER extraction systems offer the highest performance and effectiveness. Our filter systems are available in various sizes and can be tailored to your specific requirements. They offer plug-and-go functionality, a closed design, quiet operation and high-performance filter cartridges that ensure improved cleaning efficiency and energy cost savings. ZINSER cutting tables Our cutting tables are the optimal solution for air purification during the cutting process.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
MESSER CUTTING SYSTEMS GMBH
Germany
The Quicky® from Messer Cutting Systems is one of the most used portable cutting machines in the world with a reputation for reliability and quality second to none. Simple torch adjustment, both laterally and vertically and a cutting torch which comes as standard with nozzles for up to 100 mm thick Mild Steel cutting, the Quicky® is laid out for optimum performance. A wide range of options ensure flexible use for every application. The speed control is integrated ergonomically into the handle for ease of use.
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Application specific ring sets Improved properties are: Extrusion resistance, if high pressures have to be sealed and/or bigger gaps than the normally recommended max of 25 of the packing size are found. Wiper function, if any micro scaling is found on the stem and at reciprocating movement with control valves Blow out safety, when sealing high compressed gases and fumes Pliability, with low gland forces as well good reset and adaptability for example in applications with temperature cycles. Ring Set 3335 For Control Valves up to 400 °C. Ring Set 6655 For Control Valves and staem applications up to 600 °C steam. All rings are delivered as standard in skive cut. Ring Set 6660 For Valves up to 650 °C steam. This ringset offers minimal volumeloss. The rings in the sealing zone are split as standard in 2 halves or as option delivered with a skive cut. Top and bottom ring are delivered with skive cut. Soot Blower Ring Set For soot blower applications with steam temperature up to...
Request for a quoteRHODIUS ABRASIVES GMBH
Germany
The RH403S offers quick and easy chasing of grooves and ducts in materials such as masonry. Built-in electronics include a soft starter, a temperature and overload cut-out, as well as an overload indicator. The machine also features a slim design. For the wall chaser, RHODIUS offers the two diamond cutting discs LD402 with a width of 18 mm and LD403 with a width of 28.5 mm, with diameters of 125 mm and 150 mm. Thanks to the ALL IN ONE system with its staggered segments, made-to-measure wall slots can be created. Minimal hood clearance means the machine can perform edgeless work up to 18 mm when chasing with diamond discs. The cutting depth can be set to any value from 12 to 45 mm simply by adjusting the safety hood – which is quick, simple and needs no tools. Thanks to the split safety spindle with matching spacers, operators can easily swap out the tool to ensure that setup time is kept to a minimum. The ALL IN ONE can be used only with the split spindle. The chasing machine...
FATH GMBH
Germany
Automatic connector with self-cutting thread; profile slot 5, 6, 8, 10, 12 for fast and solid connection of two aluminium profiles, assembly without machining Different versions — Cutting sleeve with assembly set for profile with screw and T-slot nut or hammer nut — Cutting sleeve without assembly set — Single or double connector — Plug-in connector, butt connector or corner connector Choice of material — Steel, zinc plated — stainless steel — ESD-compatible Other possible accessories: — Cover cap to cover the automatic connector — swivelling double slot nut different lengths with several threads in multiple threads in different sizes available on request
Request for a quoteKJELLBERG VERTRIEB GMBH
Germany
The plasma cutting system HiFocus 600i neo sets new standards for plasma cutting: materials with a thickness from 0.5 to 160 mm can be cut precisely. Furthermore the system is suited for marking, bevel and underwater cutting. Consisting of two power sources (HiFocus 360i neo, power module HiFocus 600i neo) the system achieves a maximum cutting current of 600 A and can be adapted to guiding systems. With HiFocus neo the user benefits, compared to competitors, from higher speed when cutting and marking electrically conductive materials, ensuring at the same time excellent quality and low process costs. Thanks to the optimised technology, the consumables are handled gently and the plasma cutting process is more efficient. The plasma cutting system HiFocus 600i neo uses the approved Contour Cut technology for cutting contours, holes and webs fast and precisely in mild steel.
Request for a quoteZINNER GMBH PRÄZISIONSWERKZEUGE
Germany
Technical information: Disc milling cutters are ideally suited for machining long, deep grooves quickly and cost-effectively. It is also possible to incorporate disc milling cutters into a set and cut several grooves at the same time. Tool systems: The Zinner RC disc milling cutter can efficiently machine deep grooves with depths from 1.6 mm to 8.0 mm. If necessary, they can also be used for parting. The cutting tips of the RC disc milling cutter and be customised to meet almost every customer requirement. The SPM 03 disc milling cutter can cover a range of cutting widths from 8.0 -20 mm; this variant is equipped with left and right cutting inserts.
Request for a quoteResults for
Cut and set - Import exportNumber of results
12 ProductsCountries
Company type
Category