Crosses - Import export

This laser system is quickly set up for the welding task. The flexible laser arm can be rotated 360 ° and offers a very high or low working position. The laser head can be rotated to the left and right and the tilt-swivel lens directs the laser beam to the point desired by the operator. The robust housing has stable aluminum handles at the corners for increased impact protection of the edges. Integrated fastening options are available here for easy lashing during transport. The gas bottle can be transported during welding with a small trailer, the 5th wheel on the laser. Generous storage areas and special brackets on the machine sides ensure that tools, welding wire and whatever else is always within reach. Operation is intuitive via a touch display. Some apps help to weld surfaces, shafts and circular welds. The 450 W fiber laser can be used for pulsed welding or for welding in CW mode.

Avola GAMA 65 V revolving cross cut / rip cut saw Equipment / scope of supply- Cutting heights 90° / 245 mm - 45° / 164 mm - 30° / 113 mm - Machine table with lateral movement approx. 400 mm with pneumatic brake system - Machine hood with lateral PVC protective curtains - pneumatic clamping cylinder left - right - pneumatic cross-cutting operation using two-hand control - electrical saw blade inclination 90 – 30° - Revolving table 0 - 270° - Laser light for cross-cutting - Saw bla de height adjustment via mechanical stop system with scale - TCT saw blade 650 mm, dust extraction spigots 160 / 125 mm - Drive motor 12 kW – direct motor speed 1/min – 3,000 - Saw blade speed 1/min – 3,000

Avola GAMA 65 K Revolving Cross Cut Saw for professional applications Technical Equipment Motor rating 8,1 kW/400 Vac-50 Hz, star / delta start sawblade mounted direct on motor shaft Motor speed 3.000 rpm / sawblade speed 3.000 rpm Sawblade height at 90° / 245 mm – 45° / 164 mm – 30° / 113 mm Electrical sawblade inclination 90 – 30° – digital readout Revolving table 20° – 160° Two-hand pneumatic cross cutting operation Laser light for cross cutting position TCT-sawblade, dia. 650 x 30 mm x T 54 Dust extraction spigot 125 / 80 mm Options Additional clamping cylinders, horizontal, left-right Brush curtain for safety clamping hood

• For Pozidriv cross-head screws • The ergonomic multi-component design with integrated soft zones and pronounced quick driving area makes it possible to work quickly without getting tired thanks to the optimum and hand-friendly power transmission • The handle core made of impact-resistant hard plastic is sheathed with various soft components and embedded highly flexible cushions which optimally adapt to the hand and ensure maximum force transmission • The flexibility of the material and the pleasant feeling of the high-speed turning zone additionally increases the sensitivity and supports the precise application of force • The oval shape and the roll protection on both sides prevent annoying rolling away at the workplace • Practical hole booklet for hanging up the tools or for inserting a lever • Bit holder for the drive by, e.g. a ratchet or a cordless screwdriver • Blades hardened and chrome-plated with black tip • Blades made of chrome vanadium steel

These are the accessories use in printer ,use in internals.

Very good accessibility Low maintenance Highest rate of availability ASLF 'Anti-Strap-Loss-Function' Constant strap control Automatic Strap feed Strap width 5 - 12 mm, either DAT 'Direct-Access-Technology' The exclusive eject function avoids strap jam Torque controlled strap tension, adjustable Upstream and downstream interlocks Conveyor speed steplessly adjustable GreenTech energy concept, low power consumption High-Speed-Kit, optional Intuitive operator interface Machine movable MFT 'Mono-Frame-Technology' Bundle stops, optional Bundle press, optional SAO 'Safe and Open' - Safe without protection doors Table height steplessly adjustable Bundle flow control Wear-free, energy saving direct-drive-motors Low maintenance and low wear strap arch Quality standard equipment Many specific options available, easily configurable

Our cross roller guide rails are freely interchangeable standard elements. Our guide rails allow the assembly of extremely rigid and precise linear guides without any play. Benefits Able to carry high loads running extremely smooth require little space long serviceable life Mounting instructions: When mounting the guide rails make sure the bearing surfaces have been machined in a parallel manner and are to the angle. The tolerances of the bearing and mounting surfaces shall conform to the process tolerances of the guide rails (standard quality). The prestress applied depends on the respective mounting conditions, on the rigidity of the assembled slide structure respectively. We recommend to apply a prestress equivalent to a value between 5 and 20 % of the maximum admissible load. However, the load carrying ability of the overall guide rail structure thus realized will, at any case, be reduced by the prestress applied.

Tooth belt drive with profile slide Available for following automatic cutting machines: Profilma 200, 250, 500E, 510E, 600R Max. load 750 KG Dimension of stories fix, e.g. max. cutting range of the saw Conveying length 1.850 mm Profile length from 2.700 – 10.000 mm Pneumatic gripper for good feeding of the profiles

The AZOR PROFI filling valve is used when the max. line pressure of 10 bar is not high enough, as it is designed for a max. pressure of 14 bar. It is also a bit more compact than the EURO filling valve.

Product information "Cross bottom bag made of OPP with sealed seam, highly transparent, 30-40µ in different sizes" Cross bottom bag made of OPP with sealed seam, highly transparent, 30-40µ, in different sizes Features: highly transparent material OPP (polypropylene) sealed seam thickness 0.03mm (30µ) Material: This high quality and food grade cross bottom bag is made of OPP, stable and highly transparent. Our cross-bottom bags made of polypropylene have a sealed seam welded on the back and are perfect for filling flavored, ground products such as salt, spices, decorative sand, etc. or confectionery.

Our classic product in countless variations. With or without a 2 mm base plate. For easy, systematic slab laying on solid/ level substrates.

zinc diecasting*powdercoated*for rods up to 20 mm Ø*4-way connection

The Laser Mini offers a selective measurement of methane without interfering cross-sensitivities. The device monitors itself and is therefore almost maintenance-free. Thanks to the menu navigation in conjunction with supporting displays of the measurement history, absolute value, etc., the Laser Mini is easy and safe to use even by inexperienced users. The Laser Mini only needs to be switched on.

REVOLVING CROSS CUT SAW WITH NC PROGRAMMING SYSTEM GAMA 65 K3 Fully automatic circular saw for positioning and controlling via touchscreen with length measuring system EXENSO COMFORT (Pusher system) Application Length stop system (pusher operation), revolving table and sawblade inclination via servo - motor for positioning ( cross cut, mitre cut or compound mitre cut) of heavy workpieces, i.e. carpenter industry, gluelam industry, log house industry, wooden frame work, solid wood, etc. Technical Equipment : - Motor rating 8,1 kW / 400 Vac-50Hz, star / delta start, direct driven - Motor speed 3.000 rpm - Electrical sawblade inclination 90-30° via servo motor - Laser light for cross cutting - Sawblade height at 90° / 245 mm – 45° / 164 mm – 30° / 113 mm - TCT – sawblade 650 x 30 x T 54 - Dust extraction spigot 125 / 80 mm - Revolving table 20° - 160° - Horizontal material clamping system, right - left - pneumatische Kappvorrichtung über ZweihandSteuerung/vollautomatisch

Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.

MULTI CROSS RILLO couplings are highly torsionally flexible tyre couplings with progressive torsional deflection haracteristic. The salient feature of the MULTI CROSS RILLO shaft couplings is that the coupling hubs are supplied with commercially available taper bushes for nominal torques of up to 11500 Nm. This allows easy and time saving mounting of the coupling hubs on the shaft. Special tools are not required. The most important attributes and advantages of the highly flexible MULTI CROSS RILLO couplings: High torsional flexibility with progressive torsional deflection characteristic High compensating capability for axial, radial and angular misalignments Easy and time saving mounting of the coupling hubs thanks to the use of taper bushes Radial change of the rubber element without axial movement of the coupled machines Backlash-free torque transmission even in case of alternating directions of rotation High torsional vibration and shock load damping capability Noise level...

The MULTI CROSS FORTE is a highly flexible coupling with progressive torsional stiffness. The special characteristic of all MULTI CROSS FORTE couplings is the use of transmission elements, which are alike within the same type series, but their number vary according to the size of the coupling. The most salient characteristics and advantages of the highly flexible MULTI CROSS FORTE coupling: Very high torsional flexibility with a progressive torsional characteristic line High compensation capability of axial, radial and angular misalignment Backlash-free torque transmission even for reverse rotation High torsional vibration and shock load absorbing capability Good removal of heat which may be generated by the damping effect of the coupling Easy alignment of the coupling Positive fit between transmission element and hub flange to prevent relative movement Cost-saving spare parts inventory by use of the same element size within one series type We are glad to see that you are...

The proven secutex wire coil mat reliably prevents scratches and dents. The lightweight mat can be positioned quickly. Users especially rate the new rolloff stop. The individual wire rings hook firmly into the transverse grooves. The wire bundles no longer slip and an additional bundling is no longer necessary.

Chain conveyor for heavy profiles Available for following automatic cutting machines: Profilma 510 E, 600 R Max. load 5.300 KG Dimension of stories fix, e.g. max. cutting range of the saw Conveying length 1.550 mm Profile length from 500 – 7.000 mm Pneumatic gripper for good feeding of the profiles Buffer storage in front of the loader Infeed of material by driven belts

Cross Connector Nr. 50

Cross Connector Nr. 51

Highly flexible coupling with progressive torsional stiffness MULTI CROSS FORTE MCF * Very high torsional flexibility with a progressive torsional characteristic line * High compensation capability of axial, radial and angular misalignment * Backlash-free torque transmission even for reverse rotation * High torsional vibration and shock load absorbing capability * Good removal of heat which may be generated by the damping effect of the coupling * Easy alignment of the coupling * Positive fit between transmission element and hub fl ange to prevent relative movement * Cost-saving spare parts inventory by use of the same element size within one series type

Cross Connector Nr. 62

Cross Connector Nr. 50

Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.

Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.

Efficient use of waste heat (up to 1.000 °C) In many production processes waste heat occurs in form of hot air which is put out to the environment without any use. Very often these hot gases are contaminated air. On the other side clean (cold) air must be warmed up for the production process. In these cases cross flow heat exchanger can reduce the energy costs. The hot air stream will be conducted in the cross or counter flow method over the cold air inside the cross flow heat exchanger. Though both air streams are strictly separated because of the construction of the heat exchanger and they don´t get mixed (leakage less than 0,5 %). Only the energy of the hot waste stream is transferred to the cold clean stream.

Customized air-air heat exchanger for the industry (up to 1.000°C) Hot outgoing air and cold incoming air Very often hot exhaust gas gets out in the environment without any use. On the other hand cold incoming air must be lead into the production process and shall be warmed. This occurs for example very often within drying technology. In this case air-air heat exchangers can be used very efficient in heat recovery. As result you have great potential to save energy expenses. Three types of air-air heat exchangers The Anthermo GmbH delivers three types of different air-air-heat exchangers: cross-flow heat exchanger straight-tube heat exchanger flat-tube heat exchanger The technical figures (for ex. amount of air, temperature, pressure, waste of air) can be different for the air-air heat exchanger. Also the operating conditions and the environment conditions can vary from application to application.

high accuracy for feed repeat of +/ 0,05 mm high clamping force to serve even large material crosssections serving a wide variety of materials, such as coil, band, bar or profile stocks or even wires, cardboards, papers and fabrics operation in push or pull mode or combined in pushpull mode special air cylinder design for reduced air consumption feed length adjustment via finethreaded spindle