Covering design - Import export

The troubleshooter for energy supply systems in the chip area - available in 4 sizes. Chips and dirt can affect the service life of cables and hoses significantly. With the RX system, igus® offers an extremely tight plastic e-tube that is nonetheless very easy to open. Snap-open in the outer radius A smooth, curved outer contour prevents chips from sticking Injection-molded "sealing lips" all around No holes, cracks, undercuts Series RX40 is IP40 tested (TÜV Saarland) Interior separation and guide trough available Covered pin/hole connection and stops "RBR" version with bending radius on both sides available Typical branches of industry Machine tools All applications in the direct chip sector Applications exposed to dust and dirt General mechanical engineering Dimensions and technical datas RX e-tubes RX32 Inner height hi: 42 mm Inner widths Bi: 80mm Bending radii R: 80 - 250 mm Pitch: 32 mm RX E-Tube RX40 Inner height hi: 52 mm Inner widths Bi: 100 mm bending radii R: 100 - 300 mm Pitch: 40 mm RX E-Tube RX48 Inner height hi: 62 mm Inner widths Bi: 120mm Bending radii R: 120 - 325 mm Pitch: 48 mm RX E-Tube RX56 Inner height hi: 73 mm Inner widths Bi: 140mm Bending radii R: 140 - 350 mm Pitch: 56 mm RX E-Tube RX56 High-temperature plastic version of the chip-proof RX energy tubes from stock - 850°C from 24h RX - from stock against hot chips red dot 2011: honourable mention for RX40 iF-Design-Award for RX e-tubes ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 classification on request e-tubes available as special design with HT material for 850°C hot chips The troubleshooter for energy supply systems in the chip area - available in 4 sizes. Chips and dirt can affect the service life of cables and hoses significantly. With the RX system, igus® offers an extremely tight plastic e-tube that is nonetheless very easy to open. Snap-open in the outer radius A smooth, curved outer contour prevents chips from sticking Injection-molded "sealing lips" all around No holes, cracks, undercuts Series RX40 is IP40 tested (TÜV Saarland) Interior separation and guide trough available Covered pin/hole connection and stops "RBR" version with bending radius on both sides available Typical branches of industry Machine tools All applications in the direct chip sector Applications exposed to dust and dirt General mechanical engineering Dimensions and technical datas RX e-tubes Chip tests in the igus® laboratory demonstrate the tremendous chip-proof properties of the igus® RX tube. Chip-proof - for all types of chips and applications RX32 Inner height hi: 42 mm Inner widths Bi: 80mm Bending radii R: 80 - 250 mm Pitch: 32 mm RX E-Tube RX40 Inner height hi: 52 mm Inner widths Bi: 100 mm bending radii R: 100 - 300 mm Pitch: 40 mm RX E-Tube RX48 Inner height hi: 62 mm Inner widths Bi: 120mm Bending radii R: 120 - 325 mm Pitch: 48 mm RX E-Tube RX56 Inner height hi: 73 mm Inner widths Bi: 140mm Bending radii R: 140 - 350 mm Pitch: 56 mm RX E-Tube RX56 High-temperature plastic version of the chip-proof RX energy tubes from stock - 850°C from 24h RX - from stock against hot chips Submersion test in water - Various tube types were submerged under water. The new RX tube needs over 30 seconds until it is filled up, thus proving its high leak tightness Y = time in seconds A = igus® products B = competitor Chip penetration test - Various types of tube were exposed to a defined quantity of chips. In the new RX tube, after 80,000 cycles only 0.2 g of chips were found in the interior Y = chip mass [g] A = igus® RX e-tube RX40.100.100 251.900 cycles B = igus® e-tubes 68.10.100.0 256.132 cycles C = test tube 01 250.907 cycles D = test tube 02* 2.600 cycles *Teststop after 2.600 cycles E = igus® products F = competitor E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Productfinder Assembly instruction Dismantling / assembling a cover, replacing a chain link and assembling / inserting the RX tube. Assembly instruction Configure interior separation Define cables, select chain and configure interior separation. Now also for RX tubes! Interior separation configurator Application examples Applications in various industrial sectors. RX tubes Series RX - new chip-proof design, small pitch, removable cover 1 Chip-proof design without undercuts and edges 2 Excentric locking 3 Material igumid G 4 rounded shape 5 covered pin/hole connection RX tubes IP tested Technical report TÜV NORD red dot 2011: honourable mention for RX40 iF-Design-Award for RX e-tubes ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 classification on request e-tubes available as special design with HT material for 850°C hot chips

Cover for a salt spray test facility The original plexiglass cover of this salt spray test system needed to be replaced by a new, much sturdier cover. This was designed and manufactured by TC on the basis of GRP profiles and GRP sheet material.

The LIPP Double Seam System enables containers to be constructed on site within a short space of time with a diameter that is steplessly variable between 3 and more than 50 metres. Damaged concrete containers can also be easily refurbished (see Container Refurbishing). If a liquid manure container needs to be covered, Lipp offers a wide range of container roof and cover designs to choose from. The range includes simple foil roofs, single and double skin roofs and double diaphragm roofs as well as the high quality LIPP stainless steel diaphragm cover.

The Checkweigher Flexus® meets the strictest requirements when it comes to hygienic design guidelines for packaged foods. A wide range of configurations ensure that every requirement is covered. Hygienic design for easy cleaning and the highest level of quality in your production operations Safety and reliability thanks to EMFC load cell technology The ideal solution every time – configure Flexus® for your application Easy to combine with metal detection technology Vistus®

Use: Connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. Jab-in cover allow easy connection without need cover removal. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.

With its modular and configurable design, Synus can cover numerous applications including those requiring Weights & Measures approvals. EMFC high-resolution weighcell technology offering a high throughput combined with maximum accuracy Maximum throughput of 250 pcs. per minute Optimized standard configurations for versatile applications Possibility for integrating a Vistus® metal detector, even after initial installation Adjustable conveyor height, allowing you to adapt the checkweigher to changing situations Weight: approx. 250 kg (depending on configuration)

Plastic drill cassettes for drill bit sets (HSS drill sets DIN 338, machine tap sets DIN 371/376 etc.) Four parts: cover, base, insert and safety pin Sturdy and modern design with ergonomic body design Clear cover allows for product visibility

FLEXIBLE POST DIGESTERS FOR INCREASING BIOGAS YIELD LIPP offers three flexible Post Digesters for ensuring the effective utilisation of residual gases and improving efficiency which can be tailored to the requirements of each individual biogas plant. LIPP Universal Digester LIPP KomBio Reactor LIPP Eco Post DigesterCan be integrated in existing plants Flexible diameter and height Minimal installation space required Short installation time Durable tanks and covers Consistent quality worldwide Individually customisable based on customer’s requirements ROOFS AND COVERS PRODUCT SPECIFICATIONS LIPP POST DIGESTER THE RIGHT POST DIGESTER FOR ANY TASK The LIPP Universal Post Digester (with digester chamber volumes from 200 to 5,000 m3) comes with the high quality LIPP stainless steel diaphragm cover and is designed for use with an external gas accumulator. It is particularly suitable for the collection of residual gases and for improving efficiency.

Due to the modular design, customer specific solutions can be realized in a short time. optical system with telecentric or infinite optical path exchangable objectives or turret (optional motorized) motorized measuring stage with 3-axis-joystick for fast and comfortable positioning flexible tube configuration using our component system solid granite base body, steel cover and chassis, portal design, passive or active anti-vibration system console with integrated measuring computer stepless trasmitted and coaxial incident illumination with glass fiber and cold light source high resolution digital video camera optional attachment of different optical sensors (e.g. triangulation laser, white light sensor)

Ready-to-install trunking systems – on time and at a fixed price Practical cable routeing – this means the combination of high-grade trunking products with a comprehensive range of services covering design, tools and installation. Customers can expect higher productivity, further rationalisation and cost savings. Cutting and fixing metal trunking by hand is complex, personnel-intensive, expensive and often involves time-consuming reworking. PFLITSCH manufactures made-to-measure, ready-to-install trunking assemblies from CAD drawings efficiently and rationally. This saves substantial time for the customer and relieves his staff of many routine tasks. Delivery is made on the scheduled date and at a fixed price, which can also include installation on site if desired. Your advantages: Transparent and cost-effective total price Designed to drawings Automatically generated parts and ordering lists Delivered on schedule Optimised production planning Relief of your staff

technoPLUS is an advanced designer enclosure made from high-quality, UV-resistant Luran for electronic applications outdoors. The lid already has a recess to accommodate membrane keypads, films or touchpads. The screw channels are outside of the enclosure interior, thus allowing the enclosure to be attached while the lid is closed. The screw channels are simply covered with captive designer clips following assembly. Practical lid supports are available to provide strain relief on internal mountings in the lid. To enable use almost anywhere outdoors, technoPLUS comes with a practical mast support, which clings to virtually any curve. In the interior, there are fastening domes for the easy attachment of internal mountings. Compatible cable glands and other accessories are of course also available.

aluPLUS is a modern enclosure made from die-cast aluminium for industrial electronics and electronic applications. It is available in the usual standard industrial sizes for the attachment of terminals, PCBs or mounting plates. The areas of application are numerous. aluPLUS is suitable for attachment to the wall outside and for industrial electronics and mechanical engineering. The lid has a recess to accommodate membrane keypads or front plates. The design covers cover the screws of the wall and lid attachment and give the enclosure an attractive appearance. The enclosure should be mounted while closed. Integrated M5 fastening threads in the bottom and lid offer optimum fastening options for a wide range of internal mountings. Extensive range of accessories and matching cable glands are also available.

starCASE is a true multipurpose enclosure made from flame-retardant Luran. starCASE is ideally suited for almost every kind of application and also a perfect enclosure for the visual range thanks to its ergonomic and modern design. There are numerous fastening options: be it wall, ceiling, sheet piling or machine fastening – everything is possible. The integrated recess in the lid enables films, membrane keypads or front plates to be attached easily – depending on individual requirements Beneath the design covers on the curves of the enclosure are lid screws and separate screw channels for fastening the enclosure. These enable the housing to be attached with the lid closed. Practical lid supports provide simultaneous strain relief for the internal lid mounting. An optional lid lock prevents unauthorised access to the internal mountings. Matching accessories and cable glands are also available.

aluDISC is the first round aluminium enclosure for industrial electronics and electronic components. The unique shape integrates perfectly into industrial machinery and piping systems. Whether fitted to the wall, integrated into a pipe system or a machine body – the round shape always makes a good impression. The lid already has a recess to accommodate membrane keypads or a front plate. A version with a fold-out, transparent lid with ingress protection IP 65 is also available. The snap-on design covers hide the screw channels. The enclosure can be mounted while closed. Practical lid supports are also available. Fastening domes in the bottom and the lid to accommodate e.g. circuit boards or mounting plates are also integrated as standard. Matching cable glands and more can also be supplied by us.

Our latest series of 3 gas-cooled weld heads technical optimized and in an new design covers the tube size ranges from 6mm – 114.3mm / 0.250” - 4.500”. Unique construction and material selection allows a high duty cycle even without water cooling. The weld heads are one of the narrowest on the market and have a ‘quick latch’ system for retaining the collets. For the high duty cycle applications we also offer the gas-cooled S series weld heads in a water-cooled SW-version (the overall width remains unchanged). Full water-cooling of the lower clamp housing. Also available as an upgrade for standard OSK S weld heads. Weld head type \ Field of application mm \ inch \ weight OSK 53 S + SW \ OD 6 - 53mm \ 0.250" - 2.087" \ 2.1kg OSK 76 S + SW \ OD 6 - 76.2mm \ 0.250" - 3.000" \ 2.6kg OSK 115 S + SW \ OD 9.53 - 114.3mm \ 0.375" - 4.500" \ 3.4kg OSK 170 GW \ OD 50 - 168.3mm \ 1.969" - 6.626" \ 7.5kg

Angle connector 45°, for easy connection of two aluminium profiles at 45° angle without profile machining Different sizes and versions: — Profile 20, 30, 40, 45, 60, 80, 90 — Profile 25/1"; 51/25 - 2"/10"; 38 - 1,5"; 76/38 - 3"/1,5" — Profile slot 5; 6.5; 8; 10 Material: — Die-cast aluminium blank or aluminium color — Zinc Di-Cast blank or aluminium colot various models/designs: — Single — with cover cap plastic PA, glass fibre reinforced; optionally incl. mounting set Other surfaces, other colors on request! Translated with www.DeepL.com/Translator (free version)

With illuminated switch and self-closing cover. Compact design, for comfortable handling. Practical carrying handle. Variable use, standing or flat. Robust, rigid construction. 4 earthed sockets with self-closing covers. With illuminated 2-pole ON/OFF switch. With safety cut-out. Childproof sockets. Design protected. Cable length: 10 m Cable: H05VV-F 3G1,5 Nominal current: 16 A Colour: Black/Light Grey Plug-in system: DE

▪ Saddles according to DIN 1592: Single-ended design ▪ Saddles according to DIN 1593: Double-ended design ▪ Covering all standard metric and imperial diameters between 5,5 mm and 115 mm / .22 inch and4.53 inch

Black packaging made of cardboard, covered with Croco Design paper for all types of gifts 028066.001001 black Black packaging made of cardboard, covered with Croco Design paper for all types of gifts Product No.: 028066.001001 Dimensions: 60 x 60 x 26 mm Colour interior black Colour outside black In order to see prices you have to be registered as client/guest and logged in. Here you can register as client/guest. (exclusive VAT, excluding freight charges) with imprint » Information with regards to logo printing Quantity: » Tell a friend about product

Our ABS Therm thermal protective cover (330 mm) can be used to insulate an anchorage point or support in a lifeline system. The cover can be shortened and is available in two diameters (16 and 42 mm - inner diameter). Add an ABS Signal signal rod to easily locate your anchorage device in snow cover. 330 mm high – can be individually shortened onsite Installed on top of your roof membrane Thermal cover: Outer diameter 70 mm – designed for anchorage points and lifeline systems (Ø16 mm) Thermal cover: Outer diameter 100 mm – designed for systems using a supporting tube (Ø 42 mm)

As compared with conventional LDPE and HDPE films, multi-layer, diagonally laminated EXCOR VALENO X Film delivers extremely good strength properties. These make it ideal for multiple uses, while the ability to use both sides without having to worry about the effective direction provide additional operational security. EXCOR VALENO X Film is ideally suitable for packaging very bulky objects such as machinery, particularly if severe mechanical stresses are anticipated during transport. As single or multiple use packaging, VALENO X Film often comes in the form of covers specifically designed to fit the shape of the merchandise to be transported, complete with special closure and fastening accessories.

Ultrasonic sealing system with electronic self-calibration High-end Standard 6 sealing unit Dispenser variably mountable Intuitive user guidance via colored touch panel Electromechanically driven aluminum rollers ensure an optimal product transport Continuously adjustable conveyor speed from 0.2to 1.0m/s Bundle positioning via increments by metrical input of the strapping positions Open design without protective coverings - CE marking inclusive conformity declaration Infeed side guidance Extremely low energy consumption

Cable cover tape manufactured acc. to DIN 54841-5 Standard design: Material: PE-HD Roll length: see below Surface colour: see below Thickness: see below Labelling: Caution – High-Voltage Cable Possible designs: Cover width: 50 mm to 300 mm Length: 25 m to 100 m Thickness: 1 mm to 7,5 mm Surface colour: red, blue, green, black Longitudinal locking: with or without (> 3 mm without) Labelling: acc. to customer specifications

Gabled cable cover on roll Manufactured acc. to DIN 54841-5 Standard design: Material: PE-HD Roll length: 25 or 50 m Thickness: 2 mm Surface colour: red Labelling: Achtung Starkstromkabel Longitudinal locking: using the Z.I.S. Easy Lock System Possible designs: Cover width: 100 mm to220 mm Length: 25 m to 50 m Thickness: 1 mm to 3 mm Surface colour: yellow, blue, green, orange, black Longitudinal locking: with or without Z.I.S. Easy Lock System Labelling: acc. to customer specifications

Gabled cable cover Manufactured acc. to DIN 54841-5 Standard design: Material: PE-HD Length: 1.000 mm Surface colour: red Thickness: 2 mm Labelling: Achtung Starkstromkabel Longitudinal locking: using the Z.I.S. Easy Lock System Possible designs: Cover width: 100 mm to 220 mm Length: 300 mm to 3.000 mm Thickness: 1 mm to 3 mm Material: PE-HD or PVC-U Surface colour: yellow, blue, green, orange, black Longitudinal locking: with or without Z.I.S. Easy Lock System Labelling: acc. to customer specifications

Standard design: Material: PE-HD Length: 1.000 mm Surface colour: red Thickness: 2 mm Labelling: without Longitudinal locking: using the Z.I.S. Easy Lock System Possible designs: Cover width: 40 mm to 111 mm Length: 300 mm to 3.000 mm Thickness: up to 3 mm Material: PE-HD or PVC-U Surface colour: yellow, blue, green, black Longitudinal locking: with or without Z.I.S. Easy Lock System Labelling: acc. to customer specifications

Cable cover plates with increased mechanical protection Manufactured acc. to DIN 54841-5 Standard design: Material: PE-HD Length: 1.000 mm Surface colour: red Thickness: 10 mm Labelling: Achtung Starkstromkabel Longitudinal locking: with punched holes and connection pin Possible designs: Cover width: 100 mm to 290 mm Length: 300 mm to 3.000 mm Thickness: 3 mm to 12 mm Material: PE-HD or PVC-U Surface colour: yellow, blue, green, orange, black Longitudinal locking: with or without punched holes and connection pin Labelling: acc. to customer specifications

Cable cover plates on roll Manufactured acc. to DIN 54841-5 Standard design: Material: PE-HD Roll length: 25 or 50 m Surface colour: red Thickness: 2 mm Labelling: Achtung Starkstromkabel Longitudinal locking: using the Z.I.S. Easy Lock System Possible designs: Cover width: 100 mm to 300 mm Length: 25 m to 50 m Thickness: 1 mm to 3 mm Surface colour: yellow, blue, green, orange, black Longitudinal locking: with or without Z.I.S. Easy Lock System Labelling: acc. to customer specifications

Cable cover plates Manufactured acc. to DIN 54841-5 Standard design: Material: PE-HD Lengths: 1.000 mm Surface colour: red Thickness: 2 mm Labelling: Achtung Starkstromkabel Longitudinal locking: using the Z.I.S. Easy Lock System Possible designs: Cover width: 100 mm to 300 mm Length: 300 mm to 3.000 mm Thickness: 1 mm to 3 mm Material: PE-HD or PVC-U Colour Surface: yellow, blue, green, orange, black Longitudinal locking: with or without Z.I.S. Easy Lock System Labelling: acc. to customer specifications