Results for
HS UMFORMTECHNIK GMBH
Germany
Camlock couplings are available in different dimensions for coupling stations. They are suitable for tube diameters from 40.0 / 50.0 / 60.3 and 65.0 mm and have the following characteristics: male parts in aluminium covering caps in aluminium female part with hose connector in aluminium or stainless steel
Request for a quoteSCHULZ STANZTECHNIK GMBH
Germany
Design and construction This Schulz ball caster / ball transfer unit consists of a casing, a top cover and a bearing cap as solid turned parts, a bearing ball and several support balls. To this ball caster is another casing which serves as a body for the spring. Prevent spring loaded ball casters Damage caused by shock loads. Dimensions The spacing is calculated by dividing the shortest edge length of the object to be transported by 3.5.
Request for a quoteSCHULZ STANZTECHNIK GMBH
Germany
Design and construction This Schulz ball caster / ball transfer unit consists of a casing, a top cover and a bearing cap as solid turned parts, a bearing ball and several support balls. To this ball caster is another casing which serves as a body for the spring. Prevent spring loaded ball casters Damage caused by shock loads. Dimensions The spacing is calculated by dividing the shortest edge length of the object to be transported by 3.5.
Request for a quoteSCHULZ STANZTECHNIK GMBH
Germany
Design and construction This Schulz ball caster / ball transfer unit consists of a casing with threaded pin, a top cover and a bearing cap as solid turned parts, a bearing ball and several support balls. Dimensions The spacing is calculated by dividing the shortest edge length of the object to be transported by 3.5.
Request for a quoteSCHULZ STANZTECHNIK GMBH
Germany
Design and construction This Schulz ball caster / ball transfer unit consists of a casing, a top cover and a bearing cap as solid turned parts, a bearing ball and several support balls. Dimensions The spacing is calculated by dividing the shortest edge length of the object to be transported by 3.5.
Request for a quoteSCHULZ STANZTECHNIK GMBH
Germany
Design and construction This Schulz ball caster / ball transfer unit consists of a casing, a top cover and a bearing cap as solid turned parts, a base flange, a bearing ball and several support balls. Dimensions The spacing is calculated by dividing the shortest edge length of the object to be transported by 3.5.
Request for a quoteSCHULZ STANZTECHNIK GMBH
Germany
Design and construction This Schulz ball caster / ball transfer unit consists of a casing, a top cover and a bearing cap as solid turned parts, a bearing ball and several support balls. To this ball caster is another casing which serves as a body for the spring. Prevent spring loaded ball casters Damage caused by shock loads. Dimensions Die Teilung wird ermittelt, indem man die kürzeste Kantenlänge des Fördergutes durch 3,5 dividiert.
Request for a quoteSCHULZ STANZTECHNIK GMBH
Germany
Design and construction This Schulz ball caster / ball transfer unit consists of a casing, a top cover and a bearing cap as solid turned parts, a head flange, a bearing ball and several support balls. Dimensions The spacing is calculated by dividing the shortest edge length of the object to be transported by 3.5.
Request for a quoteAWK VERSCHLÜSSE GMBH & CO KG
Germany
Plastic free cover cap for glass bottles
Request for a quoteHANSA-HOLZ-KONTOR HORST RÜCKLE GMBH & CO. KG
Germany
Electrically “versatile” adjustable head, back and foot regions. Flat motor. Film coated slatted frame in multi-layer birch, with 45 slats. Mounted in flexible TRIO caps covering the side rails. Individually adjustable level of firmness in the centre zone. Shoulder comfort zone. Load distributing centre belt.
Request for a quoteHANSA-HOLZ-KONTOR HORST RÜCKLE GMBH & CO. KG
Germany
Frame system with 3 built-in motors tasked to adjust the head, back and foot regions to any position required within the limits. Lifting built-in motor, height adjustable by 35 cm offering the benefits of a slatted frame for nursing beds. Quiet technology. Film coated slatted frame in multi-layer birch, with 28 slats. Mounted in flexible DUO caps covering the side rails. Individually adjustable level of firmness in the centre zone. Shoulder comfort zone. Load distributing centre belt.
Request for a quoteROLEC GEHÄUSE-SYSTEME GMBH
Germany
commandCASE is a functional economical and elegant control enclosure for electrical or electronic applications. Due to its construction depth, it is ideally suited to connection to a suspension arm system. commandCASE is available in three versions: with hinges and quick-acting closure (also lockable), with hinges and screw or as a fully-screwed version with lid supports to provide strain-relief on the internal mounting in the lid. A recess to accommodate membrane keypads, front plates or to fit an operating panel has already been integrated. On the reverse, the screw channels are covered with cover caps, which also serve as edge protection. On the bottom and top are numerous fastening domes for attaching internal mounting. Mounting plates, matching cable glands and other accessories are also available.
Request for a quoteSYSKOMP GMBH - EMICO
Germany
Ideal for booth construction, toolbuilding and furniture industry. Please note that diameter A should exceed the bore hole by 0.2 - 0.3 mm. Material: PE Colours: last digits 600 = white last digits 699 = black Further types on written request.
Request for a quoteSYSKOMP GMBH - EMICO
Germany
Covering caps for SIT and torx screws. Protect against dirt, damage and unintentional release. Available for countersunk and fillister head screws. Material: LDPE Colours: last digits 500 = white ~RAL 9010 last digits 599 = black ~RAL 9005 last digits 002 = silver-grey ~RAL 7001 Special colours according to RAL possible from 5,000 pcs - please send us your enquiry!
Request for a quoteGESCO-METALL GMBH SCHOTTENHAMML-BIEGETECHNIK
Germany
For over 30 years, GESCO-metall GmbH has stood for quality, competence and experience in the field of contract bending. The production focuses are curved parts for windows, doors and facades as well as complex special profiles for industrial construction, vehicle manufacturing, plant engineering and medical technology. It goes without saying that we also bend aluminium cover caps for the wood/aluminium field. Our bending technology range is rounded off by complete curved elements, including electrolytic oxidation of aluminium, powder coating, metal fittings and glass together with window sills and soffit cladding. You will find more information about bending technology, contract bending, profile bending, portholes, in our product section: Contract Bending Work, Curved Elements, Window Sills, Portholes, Glazing Frames – Door Windows.
Request for a quoteFATH GMBH
Germany
Cube connector (set) 2D and 3D, to connect three aluminum profiles at right angles with cover caps to cover the bores Different sizes: — Profile: 20, 30, 40, 45 — Profile: 1" — Profile groove 5; 6; 8; 10 Material: — Cube connector: die-cast aluminium, bright or aluminium-coloured — Cover cap: PA plastic — Mounting set Steel, galvanised Various types/versions: — Individually with cover caps — optionally incl. mounting set Various screws are available: ISO 7380 M5x14 or UNC 1/4-20x1" self-tapping screws S8x25-SW5 or S12x30 - Torx T50 Translated with www.DeepL.com/Translator (free version)
Request for a quoteFATH GMBH
Germany
Handles in various designs and dimensions: — ergonomic design and finger protection — electrostatically discharging — with/without bore and cover caps Front handle, handle, bridge handle, machine handle, comfort handle Material selection: — Plastic PA glass fibre reinforced, black — Plastic PA glass-ball reinforced, black System handle Material selection end piedes: — Plastic PA glass-ball reinforced, black Material selection tubes: — Carbon fibre, glossy finish — Aluminium, anodised — stainless steel — Steel plastik covered Strip handle Material selection handle strip: — Aluminium Material selection cover caps: — PA glass-fibre reinforced plastic Other sizes, other colors on request
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FATH GMBH
Germany
Automatic connector with self-cutting thread; profile slot 5, 6, 8, 10, 12 for fast and solid connection of two aluminium profiles, assembly without machining Different versions — Cutting sleeve with assembly set for profile with screw and T-slot nut or hammer nut — Cutting sleeve without assembly set — Single or double connector — Plug-in connector, butt connector or corner connector Choice of material — Steel, zinc plated — stainless steel — ESD-compatible Other possible accessories: — Cover cap to cover the automatic connector — swivelling double slot nut different lengths with several threads in multiple threads in different sizes available on request
Request for a quoteFATH GMBH
Germany
monitor suspension arm incl. cable management cover for mounting of heavy monitors with 6 - 12 kg, 360° mounting flange can be attached lateral or transverse to the profile mounting plate VESA MIS-D 75/100 compatible, adjustable viewing angle and height; accessories included: mounting flange incl. bolt and cover cap Nutfixierungsplatten screws & nuts centering plates, anti-loss washers, anti-loss washers
Request for a quoteFATH GMBH
Germany
Description: Connection joint with friction for the creation of system arms using profile pieces; pivotable 360°; friction joint can be attached lateral, transverse, or on the face of the profile; if attached on the front face, the core hole of the respective profile must be M8 threaded (min. 15 mm deep) Material: Housing: Aluminum die-cast Cover ring: Plastic Inserts: Steel Friction shaft: Steel Cover caps: Plastic Screws: Steel Washers: Steel Centering plates: Aluminum die-cast T-slot nuts: Steel Surface: Housing: Laquered Centering plates: Laquered Screws: Zinc plated Washers: Zinc plated T-slot nuts: Zinc plated Color: Housing: Alu color Cover ring: Gray ≈ RAL 7042 Cover caps: Gray ≈ RAL 7042 Centering plates: Alu color Set: Various Sets available - Please contact us for Details Pack Quantity: 1 piece/set
Request for a quoteFATH GMBH
Germany
Angle connector 45°, for easy connection of two aluminium profiles at 45° angle without profile machining Different sizes and versions: — Profile 20, 30, 40, 45, 60, 80, 90 — Profile 25/1"; 51/25 - 2"/10"; 38 - 1,5"; 76/38 - 3"/1,5" — Profile slot 5; 6.5; 8; 10 Material: — Die-cast aluminium blank or aluminium color — Zinc Di-Cast blank or aluminium colot various models/designs: — Single — with cover cap plastic PA, glass fibre reinforced; optionally incl. mounting set Other surfaces, other colors on request! Translated with www.DeepL.com/Translator (free version)
Request for a quoteFATH GMBH
Germany
Connection bracket (set), for right-angled connection of two or three aluminium profiles and panel elements. Different sizes and versions: — 2-hole, 4-hole, 8-hole — 30/45, 30/80, 30/100, 45/100 — 1 slot, 2 slots — Profile 20, 30, 40, 45, 80, 90 — Profile slot 5, 6, 8, 10 — open form or closed form — with cover cap (plastic PA) in various designs — with mounting set such as hammer head screws, slot nut and flange nuts — with slot fixing — with slotted hole — as support bracket 80 x 180 or 80 x 160 - fixing slot nut (set) can be swivelled in as an accessory! Material selection: — Aluminium — Die-cast aluminium — Zinc die-cast — grey cast iron — steel — blank — aluminium coloured Other surfaces, other colors on request!
Request for a quoteFATH GMBH
Germany
Self-forming screw, Torx & Self-tapping screw, hexagon socket Connection of two aluminium profiles; no thread cutting is necessary to fix the screw; because of the special form of the head of the screw and the self-forming thread, a conductive connection of two proviles is achieved Material: Zinc plated steel Self-forming countersunk screw, with hexagon socket For all mounting applications of the front of the aluminium profile; detachable and reusable; designed for optimized fastening strength Material/surface: Steel burnished or galvanised Note: can be screwed on Cover cap available in the product portfolio Self-forming button-head Screw To fix connection angles, angles, turn-locks and other components to the core hole of the aluminum profile Material: zinc plated steel Alternative: Connecting screw M12x30 (optionally Torx) for connecting two aluminium profiles Material: zinc plated steel
Request for a quoteFATH GMBH
Germany
System hinge for panel elements and aluminium profiles 3o and 40, with cover caps Positioning Function: to hold a door open at an angle at 85° or 175° or to keep it securely closed Adjustable friction: to hold a door open at an angle at any angle; infinitely variable from 0 - 5 Nm hinge moment; also supports lightweight doors Material: PA plastic, glass-fibre reinforced Bolt: depending on version, partly stainless steel Colour: black Fastening: From the front using M6 screws, from the back using hexagon nuts and bolts Extras: electrostatically discharging (ESD conductive), other sizes, different blades, other colours on request
Request for a quoteFATH GMBH
Germany
Adjustabele Hinges friktion & positioning function (Set), holds doors and flaps open at an angle or keeps them securely closed Various types: — angle of 85° or 175 — at any angle — continuously variable, 0-5 Nm hinge moment (also supports lieghtweight horizontal dorrs) — Set with cover caps Material selection: — Plastic PA glass fibre reinforced — zinc die-cast —Axle: Steinless steel extras: electrostatically discharging, other sizes, other colors on request Alternative: see "Combi Hinges" with locking lever ; available in plastic PA glass-fibre reinforced or zinc die-cast Translated with www.DeepL.com/Translator (free version)
Request for a quoteResults for
Cover cap - Import exportNumber of results
26 ProductsCountries
Company type
Category