Corrosions steel - Import export

Self-Compensating, Stainless Steel, Rolling Diaphragm Technology Energy capacity 136 Nm/cycle Stroke 25.4 mm Brilliant in every respect: These high performance miniature shock absorbers in stainless steel are based on the MC150 to MC600 product family and its proven damping technology. This means that these special absorbers offer all of the benefits of the MC standard units such as the proven ACE rolling diaphragm technology for maximum service life and direct installation in a pressure chamber with up to approx. 7 bar. Thanks to perfectly progressive maximum energy absorption and effective weight potential, their use is augmented even further by the outer body and a complete range of accessories made of stainless steel (material 1.4404). Miniature shock absorbers made of stainless steel are mainly used in medical and electro-technology, but also in shipbuilding, packaging and chemicals industry and in the food processing. For the latter, they are filled with a special oil in...

Self-Compensating, Stainless Steel, Rolling Diaphragm Technology Energy capacity 41 Nm/cycle Stroke 12.5 mm Brilliant in every respect: These high performance miniature shock absorbers in stainless steel are based on the MC150 to MC600 product family and its proven damping technology. This means that these special absorbers offer all of the benefits of the MC standard units such as the proven ACE rolling diaphragm technology for maximum service life and direct installation in a pressure chamber with up to approx. 7 bar. Thanks to perfectly progressive maximum energy absorption and effective weight potential, their use is augmented even further by the outer body and a complete range of accessories made of stainless steel (material 1.4404). Miniature shock absorbers made of stainless steel are mainly used in medical and electro-technology, but also in shipbuilding, packaging and chemicals industry and in the food processing. For the latter, they are filled with a special oil in...

Self-Compensating, Stainless Steel, Rolling Diaphragm Technology Energy capacity 20 Nm/cycle Stroke 12.5 mm Brilliant in every respect: These high performance miniature shock absorbers in stainless steel are based on the MC150 to MC600 product family and its proven damping technology. This means that these special absorbers offer all of the benefits of the MC standard units such as the proven ACE rolling diaphragm technology for maximum service life and direct installation in a pressure chamber with up to approx. 7 bar. Thanks to perfectly progressive maximum energy absorption and effective weight potential, their use is augmented even further by the outer body and a complete range of accessories made of stainless steel (material 1.4404). Miniature shock absorbers made of stainless steel are mainly used in medical and electro-technology, but also in shipbuilding, packaging and chemicals industry and in the food processing. For the latter, they are filled with a special oil in...

Franke FDC linear guides are equipped with very quiet, smooth-running, high-quality needle bearings and are made almost entirely of lightweight aluminum. Inlaid raceways made of corrosion-resistant steel make them insensitive to environmental influences as well as moisture or cleaning agents. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.

Franke FDC linear guides are equipped with very quiet, smooth-running, high-quality needle bearings and are made almost entirely of lightweight aluminum. Inlaid raceways made of corrosion-resistant steel make them insensitive to environmental influences as well as moisture or cleaning agents. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.

The Losberger De Boer Podium system makes it easy to erect a stage in an extremely short time. It offers artists and announcers the chance to be visible and take center stage. The Podium can be used for a wide variety of occasions. Its construction is solid and in accordance with German safety standards. It is designed with a long life span and a large number of deployments in mind. High-quality aluminum and hot-dip galvanized, corrosion-proof steel parts make outdoor use completely safe and add to the Podium’s durability.

ELECTRICAL SPACE HEATER TDS 120 RProfessional heating for large building areas: With the TDS 120 R and a full 30 kW heating force Owing to 30 kW of heating power, the most powerful model of the TDS-R series comes with convenient spare capacity for the permanent heating of larger rooms and is hence especially suited for temperature control in larger building sections. Accommodated in a comfortably transportable and stable carriage construction with ball-bearing wheels, the fully galvanized, coated steel sheet housing of the electrical space heater TDS 120 R houses high-quality corrosion-protected stainless steel heating elements, which immediately after switching on generate formidable heat flowing out in large volumes via the powerful air circulating follow-up fan. The desired temperature can be regulated as needed via the integrated infinitely variable thermostat and the heating capacity can be increased in two stages up to 30 kW for maximum selected warmth.

ELECTRICAL SPACE HEATER TDS 75 RProfessional heating for a wide range of applications: With the electric heating gun TDS 75 R Not only because of the round warm air outlet on-site direct heating applications run smoothly with the electrical space heater TDS 75 R. The combination of sound, straightforward heating engineering by means of corrosion-protected stainless steel heating elements for reliable, fault-free continuous heating operation as well as easy handling via infinitely variable thermostat and triply switchable heating capacity control offers you the most diverse applications. a budget-friendly heating solution without corners and edges – housed in a fully galvanized, painted steel housing with ergonomic handle.

TTR 250 Ex stainless steel desiccant dehumidifiers For use in Ex-proof zones ... The TTR 250 Ex complies with the ATEX Products Directive 2014/34/EU and was specially developed for dehumidification in hazardous areas (non-conductive dusts). Ex protection: ATEX zone 22 (Ex II 3D Ex c T240 °C) With the TTR 250 Ex you can benefit from a professional desiccant dehumidifier originally produced by Trotec which has been developed and manufactured according to the highest of quality standards in Germany. The standard operating hours counter of the TTR 250 Ex is optionally also available as a dual counter for the additional MID-compliant registration of the power consumption. A few practical benefits: * - Robust high-quality dehumidifier “made in Germany” * - Corrosion-resistant stainless steel housing * - Integrated heat recovery * - Self-regulating PTC heating * - Ampere meter to control the operating condition * - Operating hours counter

Stainless steel desiccant dehumidifier TTR 250 The TTR 250 guarantees reliable adsorption air dehumidification in the corrosion-resistant stainless steel housing The low-maintenance TTR 250 stainless steel desiccant dehumidifier does not only guarantee high dehumidification values especially at low dew points. Its housing is also known for a high corrosion resistance and good hygiene characteristics. The TTR 250 is therefore perfectly suitable for humidity regulation in production and storage areas as well as for protection against corrosion and condensation in all humidity-sensitive environments and facilities where special hygienic standards apply or where there are extremely material-straining atmospheres.

The high-quality scraper is suitable for scraping off, smoothing, cleaning, levelling out and also for removing strong adhesive, sticky substances or dried up media. The edge of the corrosion-resistant stainless steel scraper is ideal for blending and portioning viscous media. The smooth, seamless and sturdy surface ensures cleaning without difficulty and meets hygenic requirements. The scraper makes a suitable implement for use in laboratories, production and clean rooms. It is ideal for use under rugged conditions in pharmaceuticals, chemistry, cosmetics, animal feed and food & beverage.

SoftGrip® blind rivet nuts from GESIPA® make it easy to produce high-quality threads in sensitive lightweight applications. Advantages • Fast processes • Tight fit with the components • Process monitoring and process control are possible • High strength • Not dependent on surface properties • No other materials required (adhesive) • No ageing • Accessible from one side • No delamination of the CFRP • Smaller edge spacing of the holes • Large grip range • Stainless steel for high corrosion resistance • Higher hole drilling tolerances

In order to increase the corrosion resistance of the steel sheet, galvanizing or electrolytic coating is applied to the surface. The coating is generally applied in 100-300g/square meter on both surfaces. Chromate solution or oil applied to the surface of the coated material is applied to protect it against white rust.

KB Schmiedetechnik manufactures forgings in Germany, made of European quality steel and special alloys. Drop forgings of stainless steel: corrosion-resistant, non-embrittling, seawater-suitable Drop forgings according to Pressure Equipment Directive PED 2014/68/EU, AD 2000-W0, KTA, EDF/Areva/RCC-M Boiler parts for boiler systems and vessels from former Alstom, Babcock/Borsig, CNIM, Mitsubishi/Hitachi (MHPS) and more. Keywords: Valves, valve parts, valve bodies, high-pressure valves, hydraulic valves, nuclear valves, safety valves, pipe flanges, boiler construction, pipeline construction, Y-pipes, forged pipe angles, fittings, fittings, fork pieces, pipe connections, Y-pieces, T-pieces, L-pieces, forged fittings Details: KB Schmiedetechnik, a drop forge in Western Germany, is manufacturing forgings for the construction of boiler systems including tube connections for piping like fittings, flanges and complex manifolds, offshore, marine, shipbuilding

The LevelEx is available in sizes M16 to M63 or with NPT threads from 3/8" to 2 1/2". PFLITSCH manufactures the cable gland bodies from bright brass, galvanised nickel-plated brass and corrosion-free stainless steel. The LevelEx achieves protection class IP 66 or IP 68 and corresponds to the ignition protection types flameproof enclosure "Ex-d" and increased safety "Ex-e". With its wide temperature range of -60 °C to +130 °C and approvals according to ATEX and IECEx, the LevelEx can also be used under extreme environmental conditions. For armoured cables, PFLITSCH offers the LevelEX AC. It has the same technical quality as the proven LevelEx for non-armoured cables. In addition, it convinces with additional properties. For example, it scores with an innovative design for accommodating armoured cables: Two opposing windows in the armour clamping allow the correct seating of the cable armour to be checked immediately.

Nominal volume: 10 L + with folding, zinc-plated, corrosion-protected steel wire carrying handle + resistant to frost, heat, UV radiation and chemicals + available in green and brown + integrated stacking ribs allow for stacking of the trash/garbage cans + the container’s smooth surfaces are easy to clean + environmental protection: Our pre- sorting containers can be fully recycled at the end of their useful life.

Nominal Volume: 240 l Nominal Payload: 96 kg + certified waste container 240 litre + UN-approved for the transport and collection of hazardous goods and hospital waste + wheelie bin marked for clinical waste in accordance with UN3291, packaging group II + liquid-tight / watertight (without drainage hole) + waste bin with triangular slamlock + manufactured by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to UV, frost, heat and chemicals + corrosion-protected steel axle, zinc-plated + waste container with integrated chipnest in the frontal comb; this can accommodate a transponder (RFID chip) compatible with the most widely used ID and weighing systems + our waste bins meet the requirements of EC directive 2000/14 EC. Marked with the appropriate decibel level and CE symbol + waste containers for hospitals & clinical waste

Nominal Volume: 660 l Nominal Payload: 270 kg + 660 litre certified clinical / hospital waste containers + UN-approved for the transport and collection of dangerous materials + liquid-tight / watertight (without drainage hole) + waste bin with triangular slam lock + wheelie bins marked for clinical waste in accordance with UN3291, packaging group II and III + manufactured by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to UV, frost, heat and chemicals + corrosion-protected steel axle, zinc-plated + waste containers with integrated chipnest in the frontal comb; this can accommodate a transponder (RFID chip) compatible with the most widely used ID and weighing systems + waste bins meet the requirements of EC directive 2000/14 EC. Marked with the appropriate decibel level and CE symbol

Nominal volume 360 L Nominal loading capacity 144 Kg + manufactured by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + manufactured in accordance with DIN EN 840 and RAL GZ 951/1 + resistant to UV, frost, heat and chemicals + emptied by stepped comb-lifting device (shape A), reinforced by additional ribs + equipped with two solid rubber maintenance-free 200 mm diameter wheels; also available with 300 mm diameter wheels + corrosion-protected steel axle, zinc-plated + with integrated chipnest in the frontal comb; accommodates transponders (RFID chips) compatible with the most widely used ID and weighing systems + available in standard colours of grey, green, blue and brown; additional colours available + strong ribs allow for high stacking + with raised edge to prevent water ingress (e.g. during rain) + meets the requirements of EC directive 2000/14 EC.

Nominal volume 180 L Nominal loading capacity 72 Kg + manufactured in accordance with the requirements of DIN EN 840 and RAL GZ 951/1 + produced by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + UV-stabilised, extremely resistant to cold, heat and chemicals + stepped comb-lift for maximum safety during emptying + 200 mm diameter stable and smooth-running wheels; available with 250 mm diameter wheels + zinc-plated, corrosion-proof steel axle + available in standard colours of grey, green, blue and brown; additional colours available + ribbed chipnest for secure mounting of transponders/data carriers; compatible with the most widely-used identification and weighing systems + equipped with a centrally-located foot step at the rear for easier handling + strong ribs allow for high stacking + Weber wheelie bins can be fully recycled at the end of their useful life

Nominal volume 140 L Nominal loading capacity 56 Kg + manufactured in accordance with DIN EN 840 and RAL GZ 951/1 from specially developed, high molecular weight, high-density polyethylene (HDPE) + manufactured by the compact injection moulding process + durably UV-stabilised, extremely resistant to cold, heat and chemicals + optimal pouring receivers through stepped ridge bar + sturdy lid with ergonomic handles + continuous handle-grip + smooth surfaces allow for quick cleaning + external solid rubber wheels ensure good stability and stable running + corrosion-protected steel axle + available in all standard colours (e.g. grey, green, blue or brown) + manufactured ready to accommodate data carriers/transponders + complies with the noise control regulation in accordance with EC directive 2000/14/EC and is marked with the appropriate decibel level + all parts of the wheelie bins can be fully recycled at the end of their useful life

Easily read solar backlit house number plate of attractive design. Four powerful LEDs illuminate the number automatically when it gets dark. Solar House number: No power supply required. Operates on solar power delivered by an efficient, integral AA NiMH mignon battery. Four energy-saving LEDs giving countless hours of well lit visibility for the house number in the dark. Housing made of anti-corrosive stainless steel. Large, waterproof solar panel charges the battery. Pack includes three of each number from 0 - 9 and a set of letters from A - D, all large and self-adhesive for sticking to the illuminated surface. In colourful display-packaging. LEDs: 4 Measurements: 230 x 220 x 65 mm + Height of characters 80 mm Colour: Stainless steel

Nominal volume 60 L Nominal loading capacity 40 Kg + manufactured by compact injection moulding process in accordance with DIN EN 840 and RAL GZ 951/1 + the waste bins are manufactured from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to frost, heat, UV radiation and chemicals + stepped comb-lift + with continuous handle for easier handling + external 200 mm diameter wheels ensure stable running + zinc-plated steel axle, corrosion-proof + all usual colours and combinations (e.g. grey, brown or green) available + smooth inside and outside surfaces of the waste recycling bins prevent adhesion of waste; this simplifies cleaning of the container + ribbed chipnest for secure mounting of transponders/data carriers (RFID chips); compatible with the most widely-used weighing and ID systems + mobile waste bins comply with the requirements of EC directive 2000/14/EC and are marked with both the CE symbol and the appropriate noise level

Nominal volume: 80 L Nominal loading capacity: 40 Kg + manufactured in accordance with DIN EN 840 and RAL GZ 951/1 by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + UV-stabilised for outdoor use, insensitive to temperature variations and chemicals + stepped comb-lift, reinforced with ribs, for maximum safety when emptying the waste bins + very stable; fitted with 200 mm diameter solid, quiet-running rubber wheels + corrosion-resistant, zinc-plated steel axle + lid with drip edges minimises the escape of condensation water + the waste bins are available in standard colours grey, green and brown; additional colours available + with chipnest in the frontal comb to accommodate transponders (RFID chips), + compatible with the most widely-used ID and weighing systems + complies with the noise control regulation in accordance with EC directive 2000/14/EC and is marked with the appropriate noise level

The Oil Condition Sensor OCS is designed for continuous monitoring of hydraulic systems. Permanently installed in the system the OCS sensor monitors the condition of hydraulic fluids and lubricating oils in real time, whereby water ingress and oxidation can be detected in time. The OCS sensor is 60 times more sensitive than dielectric sensors on increasing contamination and protects the system from cost-intensive downtimes and reduces machine downtimes. Thanks to its robust construction the OCS sensor can even be used under extreme conditions and temperatures. ▪ Robust construction ▪ ƒƒUsage under extreme conditions with temperatures from -20 °C ... +120 °C /-4 °F ... +248 °F ▪ ƒƒSuitable for use at operating pressures up to 20 bar / 290 PSI Materials ▪ ƒƒStainless Steel (corrosion-resistant Steel) AISI304, 1.4301. Dimensions ▪ ƒƒ90 x 37 mm / 3.54 x 1.46 in Weight ▪ ƒƒ160 g / .35 lbs Sealing Material ▪ FPM (Viton®) Max. Burst Pressure ▪ 20 bar / 290 PSI Media Temperature ▪ -20 °C...

Nominal Volume: 1100 l Nominal Payload: 440 kg + 1100 litre certified waste bins + UN-approved for the transport and collection of hazardous goods + watertight (without drainage hole) + waste containers with triangular slam lock + wheelie bins marked for clinical waste in accordance with UN3291, packaging group II and III + manufactured by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to UV, frost, heat and chemicals + corrosion-protected steel axle, zinc-plated + waste bins with integrated chipnest in the frontal comb; this can accommodate a transponder (RFID chip) compatible with the most widely used ID and weighing systems + waste containers meet the requirements of EC directive 2000/14 EC. Marked with the appropriate decibel level and CE symbol

Nominal Volume: 770 l Nominal Payload: 310 kg + 770 litre certified waste container + UN-approved for the transport and collection of dangerous materials + liquid-tight / watertight (without drainage hole) + waste bin with triangular slam lock + wheelie bins marked for clinical waste in accordance with UN3291, packaging group II and III + manufactured by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to UV, frost, heat and chemicals + corrosion-protected steel axle, zinc-plated + waste container with integrated chipnest in the frontal comb; this can accommodate a transponder (RFID chip) compatible with the most widely used ID and weighing systems + Weber waste bins meet the requirements of EC directive 2000/14 EC. Marked with the appropriate decibel level and CE symbol

Service pressure: 0-30 Mpa Service temperature: -40°C up to 85°C Reliable in filling and operation direction Compact design Stainless steel, corrosion-resistant The filter is equivalent of heavy metal regulation Filter size in µ : 50 Inlet / outlet: acc. customer specifications High flow, noiseless Filter with 50µ has a free flow area = 75mm 2