Results for
WILH. KÄMPER GMBH U. CO KG
Germany
Parts are made to custom design from drawings, from very small quantities to industrial mass application, in a wide range. We work with steel, stainless steel, copper and aluminium wire and can also implement your surface requirements.
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
CNC milling, can process a variety of materials,like Aluminum, Brass, copper,steel, Beonze, Steel Stainless .... Working length range:X:1-1066mm, Y:1-600mm,Z:1-600mm
Request for a quoteKW HYDRAULIK GMBH
Germany
Mechanical Crimping Pliers Mechanical Lever Crimping Tools Hydraulic Hand Operated Crimping Tools Hydraulic Battery Driven Crimping Tools Hydraulic Crimping Heads Cordless Multifunction Tool for Crimping and Cutting Copper and Aluminium Cables
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles coated with plastic • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Ergonomic handle position and shape for optimum power transmission • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles coated with plastic • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For cutting copper and aluminium cable with strong rubber or plastic sheathing • Special cutting geometry and precision cutting for a clean cut without any burrs • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Opening of the blade in each position possible • Optimum leverage, easy handling and minimum effort by ratchet action • Made of special steel, high-strength parts that are especially subject to wear and tear are additionally hardened and tempered
Request for a quoteKELVION HOLDING GMBH
Germany
The wide range of product portfolio of coils with different tube diameters, tube patterns, fin profiles, materials and options allows us to customize our coils for any specific application and fluids: air heaters, air coolers, condensers and evaporators for HVAC and various industrial applications. Kelvion heat exchanger coils are manufactured with copper tubes and aluminum or copper fins. The fins are equipped with special profiles developed at our R&D department enhancing heat transfer and keeping pressure drop at a moderate level. The customized fin spacing is achieved by collars which also provide the contact between the fin block and the tubes. Mechanical expansion of the tubes guarantees a perfect bond between the fins and the tubes leading to maximum heat transfer between both fluids.
Request for a quoteJINTIAN COPPER
Germany
Main products: Hpb59-1、Hpb58-2A、C3604、C3771、C37700、C36000、C46500、C46400、CZ132、CW602N、Grade A polished copper ingots Product characteristics: Excellent mechanical properties, excellent hot workability, good machinability, excellent resistance to stress corrosion. Applications: Valves, pipe fittings, water heating and sanitary ware, air conditioning components and other hardware Production capacity: 207,000 tons Honorary titles: China's Top 10 Copper Wire & Rod Company, Zhejiang Famous Brand Product, Ningbo Model Unit Manufacturing Enterprise
Request for a quoteJINTIAN COPPER
Germany
Main products: TMY copper, T2 / TU2 copper rods, profiled bars, electrical round copper billets Product characteristics: High copper content, low oxygen content, compact structure, uniformity, low electrical resistivity, high electrical conductivity, precise size, excellent mechanical properties; can be customized according to demand Applications: High and low voltage electrical appliances, power electronics, power transmission and transformation, automotive industry, molds, communication technology, cables, machining, metallurgical chemicals, construction industry Production capacity: 100,000 tons Honorary titles: Zhejiang Famous Brand Product
Request for a quoteABS SAFETY GMBH
Germany
Depending on the subsurface (steel, copper, aluminium or titanium zinc), this stainless steel anchorage point can be installed on a metal roof using either aluminium or brass clamps. It is simply attached to a standing or copper standing seam using the specially-designed clamps supplied - completely penetration-free. EN 795:2012, A + CEN/TS 16415:2013 Freely-rotating anchor eyelet Clamped onto a seam without penetrating your roof surface Mounted on a single seam For steel and stainless steel ≥ 0.5 mm; copper ≥ 0.6 mm; titanium zinc and aluminium ≥ 0.7 mm For Rheinzink and similar systems Incl. installation set
Request for a quoteABS SAFETY GMBH
Germany
This stainless steel intermediate bracket - specially designed for lifeline systems - was developed for penetration-free installation on a standing seam roof. This device is attached using aluminium or brass clamps depending on your subsurface (steel, copper, aluminium or titanium zinc). EN 795:2012, C + CEN/TS 16415:2017 Clamped onto a standing seam without penetrating your roof surface Mounted on a single seam For Rheinzink and similar systems; also suitable for copper standing seam panels (Cu) Designed exclusively for use in a lifeline system Incl. installation set
Request for a quoteABS SAFETY GMBH
Germany
This stainless steel anchorage point can be installed on standing seam roofs made of steel, copper, aluminium or titanium zinc without penetrating the roof surface. Depending on the subsurface, this kind-to-your-roof device is attached using the aluminium or brass clamps supplied in the package. EN 795:2012, A + CEN/TS 16415:2017 Clamped onto two adjacent seams - completely penetration-free Seam intervals: 300 - 450 mm / 420 - 660 mm For steel and stainless steel ≥ 0.5 mm; copper ≥ 0.6 mm; aluminium & titanium zinc ≥ 0.7 mm For Rheinzink and similar systems; also suitable for copper standing seam panels (Cu) Incl. installation set
Request for a quoteEWM AG
Germany
EWM welding consumables for MIG/MAG welding Welders can choose between different welding rods with different diameters and materials to work with: — unalloyed steels — low-alloy steels — high alloy steels — Nickel-based materials — aluminium alloys — Copper-based materials — Hardfacing
Request for a quoteEWM AG
Germany
EWM welding consumables for MIG/MAG welding Welders can choose between different spool sizes with different wire diameters and materials to work with: — unalloyed steels — low-alloy steels — high ally steels — Nickel-based materials — aluminium alloys — Copper-based materials — Cladding
Request for a quoteARNTZ GMBH + CO. KG
Germany
Engineered for : • Aluminium alloys • Aluminium bronzes • Copper alloys • Sand cast aluminium and cast magnesium • Graphite
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ARNTZ GMBH + CO. KG
Germany
Engineered for : • All-purpose use for construction steel, low-alloy steel, cast iron, aluminium, copper and bronze • Solid material in medium and large dimensions
Request for a quoteKAMPMANN GMBH & CO. KG
Germany
TIP – Well-tempered air The solution for the optimum, centrally controlled heating and ventilation of buildings of all kinds. With a housing made of sendzimir galvanised sheet steel with threaded rods fitted as standard, TIP unit heaters are ideal for wall-mounting as well as ceiling-mounting. Functional principle Air is drawn in through the sheet metal sickle-blade silently-operating fan and is blown through the copper/aluminium heat exchanger into the room. The models with large heat exchange depth are ideal for use with low temperature operation. Benefits —Sickle-blade, whisper-quiet fan with optimised full nozzle —Easy to install —Unbeatable in terms of value for money Kampmann is completely modernising its unit heaters. We are responsibly taking a courageous step forwards and we will be relying systematically on EC technology to power and control our units. Reasons: — No wasted power — Minimum noise levels — ErP-compliant future
Request for a quoteKAMPMANN GMBH & CO. KG
Germany
Trench heating unit with EC tangential fan convection. Top performance from smallest dimensions. The Katherm QK nano provides high heat outputs from minimal dimensions. With a trench height of only 70 mm and a trench width of only 165 mm, it can be used wherever conventional trench solutions are impossible due to a lack of space. Due to the limited space in the unit, the interplay of the EC tangential fan and high-output copper-aluminium convector has been optimised in the Katherm QK nano. Benefits - extremely low overall height - maximal use of the floor space - usual quietness and high-performance Applications All areas of buildings in which effective heating and cold air screening is required. Effective, energy-saving heating can be provided by Katherm QK in conjunction with modern heating systems.
Request for a quoteZINNER GMBH PRÄZISIONSWERKZEUGE
Germany
ZINNER PKD or highly positively polished cutting inserts are used for machining aluminium and copper. Glass-fibre reinforced materials are machined with PKD or coated PKD tools. Diamond tools are ideally suited for the high gloss turning of non-ferrous metals.
Request for a quotePROFILMETALL-GRUPPE
Germany
Roll forming of all sheet metal materials such as steel, aluminum, stainless steel, copper, titanium, molybdenum, pre-painted materials, composite materials from 0.08 mm material thickness.
Request for a quoteELKY GESELLSCHAFT FÜR TECHNISCHE ENTWICKLUNGEN MBH
Germany
Coated and un-coated manufactured special cables and wires made from a variety of raw materials can be used in various safety, control and attenuator elements in automotive engineering. We stock a wide, extremely varied, range of connection components in a variety of designs, sizes and materials, such as brass, tinplated copper, aluminium and stainless steel. Our products are made to customer specifications, in order to best meet their requirements (including breaking strength, elongation, flexing properties, corrosion resistance, DC resistance, low twist and low tension design, workability). Our manufacturing processes are permanently monitored and secured using appropriate procedures. As standard, we use both galvanised and stainless steel wire in accordance with DIN EN 10 264 with nominal strength of over 3000 Mpa with adequate ductility. We also use the non-corroding materials 1.4301 (AISI 304), 1.4310 (AISI 301) and 1.4401 (AISI 316) as standard.
Request for a quoteResults for
Copper aluminium - Import exportNumber of results
24 ProductsCountries
Company type
Category