Control cable - Import export

In 1959, ÖLFLEX® was the very first control cable to be designed with colour-coded wires and was at the same time the first branded cable in the world. Today, ÖLFLEX® connecting and control cables are some of the most widely used in the world, and for good reason. Properties: — Flexible, almost entirely oil-resistant and universally applicable. — Fulfills the most demanding requirements for electrical and mechanical properties. — Comprehensive range for all environmental conditions, including wet/dry, EMC, outside/inside, various temperature ranges, etc. — Suitable for fixed connection or energy supply chains. — Also halogen-free and available with international licences.

GLOBALFLEX®-CY-control cables are used in tool-machines conveyor belts, production line in machinery production, in air-conditioning and in steel production for low loss data and signal transmission. They are used for installing in dry, moist and wet rooms, especially under the terms of industrial environment. Outdoor use only with UV-protection allowing for temperature range. GLOBALFLEX®-CY-control cables are suitable for medium mechanical stresses with free movement without tensile stress or forced movements. The high level of screening ensures a high degree of interference protection. the screening density assures disturbance free transmission of all signals and impulses. The product corresponds to the directive 2014/35/EU (low voltage directive).

GLOBALFLEX®-CY-control cables are used in tool-machines conveyor belts, production line in machinery production, in air-conditioning and in steel production for low loss data and signal transmission. They are used for installing in dry, moist and wet rooms, especially under the terms of industrial environment. Outdoor use only with UV-protection allowing for temperature range. GLOBALFLEX®-CY-control cables are suitable for medium mechanical stresses with free movement without tensile stress or forced movements. The high level of screening ensures a high degree of interference protection. the screening density assures disturbance free transmission of all signals and impulses. The product corresponds to the directive 2014/35/EU (low voltage directive).

To be used as halogen free, flame retardant and environmentally power, control and connecting cable in electrical facilities, in fire vulnerable areas and facilities with high concentration of people and property values, for fixed laying and flexible applications without tensile stress and without defined cable routing. Suitable for use in dry and humid rooms. Outdoor use only with UV-protection, no laying underground.

PVC-Control cables are used in tool-machines, conveyor belts, production lines in machinery production, in air-conditioning and in steel production. They are used for installing in dry, moist and wet rooms, specially under the terms of industrial environment. Outdoor use only with UV-protection allowing for temperature range. GLOBALFLEX®-control cables are suitable for medium mechanical stresses with free movement without tensile stress or forced movements.

Used as control cables and supply lines in machine engineering, plant engineering, enameling lines, power stations, air conditioning, cool systems, office machines and data precessing systems. Mainly suitable for dry, damp or wet interiors, especially in industrial environments at medium mechanical stress. Outdoor use with UV-protection only and in observance of the temperature ranges. Suitable for free, not continously returning movement without tensile stress or compulsory guidance as well as for fixed laying. GLOBALFLEX®-COLD is mainly used for cold-flexible applications due to cold-resistance up to -30°C.

GLOBALFLEX®-H05VV-F conrol cables have been successfully used or many decades as measuring and control cables in tool machinery, plant installation, power stations and in data equipment. GLOBALFLEX®-H05VV5-F control cables are used for forced movements in dry, moist and wet rooms (also water-oil-mixtures) but not suitable for outdoor. Extremely flexible, the GLOBALFLEX®-H05VV5-F control cables are particulary suitable for laying where there is free movement. The product correspondents to the directive 2014/35/EU (low voltage directive). EN 50525-2-51 / VDE 0285-525-2-51 approved CCC approved EAC (GOST) approved

To be used as halogen free, flame retardant and environmentally power, control and connecting cable in electrical facilities, in fire vulnerable areas and facilities with high concentration of people and proberty values, for fixed laying and flexible applications without tensile stress and without defined cable routing. Suitable for use in dry an humid rooms. Outdoor use only with UV-protection, no laying underground. The copper braided screening prevents electrical and magnetic interference of the control cable with the environment and of the environment with the internal cable cores.c

This cable has been manufactured for audio engineering only but these cables are also suitable in areas of houshold appliances such as very flexible network-connecting cable appliances. GLOBALFLEX®-SOFT is very ductile and is very easy to handle due to the improved talcum effect. The outer sheath is lead-free and offers contitional abrasion as well as conditional oil and UV-resistance.

TKD | 07 Rubber Cables Flexible Power supply & Control Cable for applications with high mechanical requirements. ( e.g. automotive industries, shipbuilding, machine tool building mining and industries, in quarries and on construction lots.) - Light and middle rubber-sheathed flexible cables - Heavy rubber-sheathed flexible cables - Welding cables - Special rubber cores - for permanent use in water Excerpt of versions: > flat & round > shielded, unshielded > with and without supporting element > UV-resistant, Oil-resistant Excerpt of products: H05RR-F - H05RN-F - H07RN-F - H07RN-F PREMIUM - NSSHÖU H01N2-D - H01N2-E - NSGAFÖU - NSHXAFÖ

TKD | 01 Flexible Control & Power cables Flexible Power cables for the transmission of electric power as well as flexible control cables to measure, control and regulate or monitor industrial machines & plants. - PVC-power & control cables - Approved power & control cables - Halogen-free power & control cables - PUR-power & control cables, cables for hand-held machinery - Special single cores Excerpt of versions: > shielded, unshielded > UV-resistant, Oil-resistant > UL/CSA recognized, listed > HAR - EU harmonized Excerpt of products: ÖPVC - ÖPVC-CY - ÖPVC-SY - 2YSL(St)CY - 2XSL(St)CY - H05VV5-F - H05VVC4V5-K - MUlTINORM (HAR-UL-CSA) - 2-NORM (UL-CSA) - 2-NORM TRAY (UL/CSA) - FLAME (FRNC) - 2XSL(St)CHK - KAWEFLEX® Control PUR, YPUR - H05BQ-F - H07BQ-F - HIGHFLEX LiFY - ESUY

Initiator cables, also referred to as sensor/actuator cables, connect control units and different sensors, or, in the case of reversal of the measurement principle, actuators. Frequently used abbreviations include ini or ini cable (plural: inis). Sensor or measurement transducers transform physical quantities such as rotation, speed, distance or length into analogue electric impulses. In the case of an actuator, the measured electric current (symbol: I, unit: ampere; A) or voltage (symbol: U, unit: volt; V) is transformed into temperature, pressure or torque. The connection cable consists of at least three cores with a small cross-section of between 0.14mm² and 0.34mm². In the simplest case, two cores are required for supplying the voltage, while the last core transmits an I/O signal. For sensitive applications, there are shielded versions in addition to the traditional ini cables to avoid EMC disruptions (electromagnetic compatibility).

Fast assembly and perfect organisation Modern machines contain countless power, data and control cables, along with pneumatic hoses. In large systems, the total length of these can quickly add up to several thousand metres. Cable channels make it easier to organise and assemble these cables. The BLOCAN® cable channel system made from anodised aluminium impresses not only with its attractive design, but also through a multitude of well thought out details, which offer the customer considerable added value and greatly facilitate their work. The cable channels in sizes 40, 40x20, 40x80, 80x40 and 80x80 can be supplied as 6 metre bars or cut to length. They are also available with mounting holes, which is a new feature for aluminium cable channels. These can be very quickly attached to a BLOCAN® profile slot by means of a pivoting mounting clip.

The capaNCDT 6110 is a new, capacitive single-channel displacement measurement system comprising a compact controller, a sensor cable and the sensor. Due to the miniaturised controller and its easy operation, the capaNCDT 6110 is ideally suited to the integration in machines and facilities.

The swarf is collected in a 160-Liter-metal box, This box is can be released for easy emptying 2 connecting pieces Ø 100 or Ø 70mm (pipes not included) Powered by 2,2 kW400 V / 50 Hz motor Performance 1.400 m³/h. incl. ventilating worm casing above the extractor Large filtre with big surface and external filter shaker for long durability Steady-state performance or controlled by saw No electric cable Noise level: 80 dbA Dimension203x91x84cm Weight 160 kg Serial Paint: RAL 7016 / 9016

The compact DTD inductive sensor system consists of a gauge with a plunger guided by a plain bearing and a controller, which are connected to each other with a 3 m long cable. The controller has a diameter of just 18 mm and the 3m-long cable enables flexible installation. The DTD sensor system is based on an established LVDT measuring method. It impresses with outstanding precision and provides high signal stability and resolutions down to the micrometer range. Thanks to its high temperature stability, resistance to shock and vibration, and insensitivity to dirt, the induSENSOR DTD is ideal for industrial measurement tasks. Modern fieldbuses such as Ethernet, PROFINET or EtherCAT are supported via optionally available interface modules.

The capaNCDT DT61x0/IP is an industrial-grade, capacitive sensor system for displacement, distance and position measurements. Consisting of a sensor, a sensor cable and a controller, the measuring system is ready for use without any on-site calibration. Due to its very good temperature stability, immunity to magnetic fields and robust design that is protected to IP68, the capaNCDT DT61x0/IP is used for industrial measurement tasks such as air gap measurement in generators and regulation of plant and machinery.

The 5th generation of our reliable, tried-and-tested standard controller. Can be connected to Tetrix 200 or Tetrix 351. — With special software only for RBK tube-to tubesheet weld heads — 5.7" display — Extremely simple multilingual user guidance thanks to programming support — Monitoring of gas and water cooling — Option of welding in up to SIX sectors, in continuous or step travel mode — Individual modification of the calculated program parameters, also using current percentage button — Graphic display of the welding progress — Real-time monitoring of the welding parameters ... Package includes: — Controller — Power cable — Controller / power source interface cable — USB stick — 2 pieces tungsten boxes — Pen with touch screen function and LED light Optional: — Cool 50 or EVO Cool cooling unit — AVC upgrade kit — Docutronic 2.2 software for documentation — Orbicontrol 3 remote control — Spare paper rolls, spare ribbon cartridges

The 5th generation of our reliable, tried-and-tested standard controller. Can be connected to Tetrix 200 or Tetrix 351. — 5.7" display — Extremely simple multilingual user guidance thanks to programming support — Monitoring of gas and water cooling — Orbital tacking mode can be activated — Option of welding in up to SIX sectors, in continuous or step travel mode — Individual modification of the calculated program parameters, also using current percentage button — The current and wire feed parameters can also be changed during welding — Graphic display of the welding progress ... Package includes: — Controller — Power cable — Controller / power source interface cable — USB stick — 2 pieces tungsten boxes — Pen with touch screen function and LED light Optional: — Cool 50 or EVO Cool cooling unit — AVC upgrade kit — Docutronic 2.2 software for documentation — Orbicontrol 3 remote control — Spare paper rolls, spare ribbon cartridges

The 5th generation of our reliable, tried-and-tested standard controller. Can be connected to Tetrix 200 or Tetrix 351. — 5.7" display — Extremely simple multilingual user guidance thanks to programming support — Monitoring of gas and water cooling — Option of welding in up to SIX sectors, in continuous or step travel mode — Individual modification of the calculated program parameters, also using current percentage button — Graphic display of the welding progress — Real-time monitoring of the welding parameters — Integrated day counter (assignment to isometries and weld joint numbers) ... Package includes: — Controller — Power cable — Controller / power source interface cable — USB stick — 2 pieces tungsten boxes — Pen with touch screen function and LED light Optional: — Cool 50 or EVO Cool cooling unit — AVC upgrade kit — Docutronic 2.2 software for documentation — Orbicontrol 3 remote control — Spare paper rolls, spare ribbon cartridges

The Platform Truck SFB is a freely manoeuvrable, self-propelled electric vehicle for the in-plant transport of all sorts of heavy loads such as: metal sheets, steel girders, coils, machine parts, cast iron and tools. Due to its modular design, this self-propelled vehicle can be customized to suit various customer-specific requirements. load capacities up to 63t can be used as an all-purpose vehicle indoor and outdoor application cable remote control battery powered electric drive (80V) maintenance-free AC drive technology robust design single-axle, all-wheel and multidirectional steering Options: proportional steering radio remote control cabin or driver's station solid rubber tires for driving over asphalt lighting / LED side lighting loading platform according to customer specification safety devices according to customer specification automatization to a driverless transport system, with partners hydraulic lifting device further options available upon request

The rail-mounted trucks made by HUBTEX are tailor-made to suit individual customer wishes and requirements. Well-proven standard components are used in the driving mechanisms and the control technology. The rail-mounted truck is exclusively designed for in-plant transport. load capacities up to 150t load and/or towing vehicle indoor and outdoor application battery-powered, electric powered or without driving mechanism rugged running wheels cable remote control maintenance-free AC drive technology robust design individual frame design, depending on the transport task Options: radio remote control cabin or driver's station lighting / LED side lighting loading platform according to customer specification safety devices according to customer specification driverless transport system hydraulic lifting device further options available upon request

Ideal for shear studs and threaded studs High repeatability Hydraulic plunge damper Standard support with 2 legs Body Polyamid Compensation for stud length variations up to 8mm Control cable plug (4 wire) Stud welding with shielding gas: optional

Best for stud welding using shielding gas ø 3 – 16 mm High repeatability Standard support with 2 legs Body made of fibre-glass reinforced polyamide Compensation for stud length variations up to 8mm Control cable plug (4 wire) Stud welding with shielding gas: optional

The model K 26 is a robust stud welding gun, especially for studs ø 22 – 25 mm Ideal for welding shear connectors SD 25 mm Ideal for through-deck-welding td Most suitable for long shear studs Adjustable hydraulic plunge damper Standard support with 3 legs Body: fibre-glass reinforced polyamide Lifting ring system with length compensation up to 8mm Control cable plug (4 wire) Optimal Integrated shielding gas device

The model K 24 is a robust stud welding gun, especially for studs ø 19 - 22 mm Ideal for welding shear connectors Ideal for through-deck-welding td High repeatability Hydraulic plunge damper Standard support with 2 legs Body made of fibre-glass reinforced polyamide Compensation for stud length variations up to 8mm Control cable plug (4 wire) Stud welding with shielding gas: optional

The model SK15 is a robust stud welding gun, designed for welding of threaded studs with ceramic ferrules ø 4 - 12 mm Ideal for short cylce stud welding ø 3 - 12 mm Best for stud welding using shielding gas ø 3 – 12 mm Lifting range 1 – 4,5 mm Standard support with 2 legs High repeatability Body made of fibre-glass reinforced polyamide Control cable plug (4 wire) Optional Integrated shielding gas device

The model SK14 is a robust stud welding gun, designed for welding of threaded studs with ceramic ferrules ø 4 - 12 mm Ideal for short cylce stud welding ø 4–12 mm Best for stud welding using shielding gas ø 3 – 12 mm Lifting range 1 – 4,5 mm Standard support with 2 legs High repeatability Body Polyamid Control cable plug (4 wire)

Used as control cables and suply lines in machine engineering, plant engineering, enameling lines, power stations, air conditioning, cooling systems, office machines and data precessing systems. Mainly suitable for dry, damp or wet interiors, especially in industrial environments at medium mechanical stress. Outdoor use with UV protection only and in observance of the temperature ranges.Suitable for free, not continously returning movement without tensile stress or compulsory guidance as well as for fixed laying. GLOBALFLEX®-JZ/OZ 0,6/1kV is UV-resistant and mainly used for applications in southern European countries, Arabic countries and eastern European contries.