Combines - Import export

• American pattern • For holding, gripping, bending and cutting work • For cutting hard and soft wires • Cutting edges inductively hardened • With Nail- & wire holder • Gripping zones for flat and round materials • Asymmetric inside jaws for better grip on the workpiece • Integrated ring spanner • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• American pattern • For holding, gripping, bending and cutting work • For cutting hard and soft wires • For shortening screws M 3.5 • Cutting edges inductively hardened • With Nail- & wire holder • Gripping zones for flat and round materials • Asymmetric inside jaws for better grip on the workpiece • Integrated ring spanner • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

CONEC Combination D-SUB Connectors with IP67-rating are suitable for use in environments where increased protection against moisture and contamination is necessary. All IP67 protected Combination D-SUB Connectors are supplied already populated with signal, high voltage, high power or coaxial contacts. This is necessary to provide factory assurance that the connector is properly sealed thus ensuring its reliable protection in harsh environments. The type of protection is defined by IEC 60529 which also specifies the suitability of electrical components for various ambient conditions. CONEC water resistant connectors ensure a continuously secure connection compliant with the IP67 rating. They are dustproof and protected against temporary submersion into water.

D-SUB Combination connectors offer the possibility to equip a proven design with new functionality. This is done by using different contact types without having to change the shape, size and installation dimensions of the connector itself. By using high-current contacts, the power supply of the device can be realized without an additional interface for the power supply. High-voltage contacts allow operating voltages of up to 2.8 kV. Fast signal transmission over shielded coaxial lines is achieved with the use of special coaxial contacts. A choice can be made between the Combination D-SUB, Combination D-SUB High Density and Combination D-SUB Dual Port series. In all variants, different combinations with signal, high current, high voltage or coaxial contacts are possible. The combination of different contact types offers interesting possibilities to save space and costs in the interface area. The connectors are always supplied with signal contacts, except for the crimp version.

The O-Rail linear system with rollers ensures the highest flexibility of configuration thanks to the original shape of the FXRG guide, the system basic component, featuring 3 raceways arranged at 90°, over which the R series rollers can run on any one of the 3 raceways. Using a single or multiple parallel guides allows users to achieve several combinations, able to meet all linear motion requirements. O-Rail has been designed as a versatile linear system, ideal for automated applications. It is an easy to assemble system, able to offer a smooth motion even on uneven surfaces.

The new QuellTech Q5 Laser Scanner Series combines the advantages of small form factors with both high resolution and scan rate. The sensor disposes of different set-up possibilities with respect to the analysis algorithm. Measurement results are delivered via Ethernet, calibrated in the X / Z plane. Special adjustable algorithms can be selected, extremely useful particularly also for optically most demanding surfaces. Time-consuming calibration tasks for the user are no more required, as the calibration routine runs on board. High Scan Rate with up to 14,000 Profiles per Second Due to an appropriate limitation of the image range (AOI) in X and Z direction, the scan rate could considerably be increased. High resolution and detection frequency with up to 14.000 profiles and 28 Mio. points per second •X measuring range from 10 to 1022 mm •Z measuring range (height) from 5 to 878 mm •Laser wave length blue 405/450nm, red 650nm

The SVM1/1P is a high quality machine for attaching hinges and clasps with fastening prongs. The single hinges and single clasps are attached to your product (cases, caskets…) with this machine. Special features Changing the operating mode “Hinge fastening“ and“ Clasp fastening“ is very quick to carry out. Benefits / Characteristics can be used for various materials (all types of wood, certain tinplates and plastic) very low capital cost ideal for short runs precision attachment of the hinges and clasps consistent high quality ease of operation verschiedene Befestigungsarten möglich (Innen- und Außenanschlag, Flach- und Schiebedeckel) works with all Schmale hinge and clasp models with fastening prongs meets current machine regulations 2006/42/EU “CE“ only branded components used very maintenance friendly service and maintenance available Made in Germany Technical Data Dimensions / Hinge fastening mode: Length 500 mm Width 750 mm Height 1,180 mm Dimensions / Clasp fastening...

This guiding system makes it possible to accurately position your products. Furthermore, you can fix it exactly at the desired place. The innovation lies in the backlash-free clamping, horizontal and vertical side misalignment ≤ 3 μm. Useful advantages: compact sizes and the possibility of adjusting and locking the guide by a hex screwdriver. Clamps permit a fast combination to 2 axis systems and/or 3 axis systems or the fitting of axis systems on a base plate. Features Dovetail slides made of Aluminium, natural anodized 5 sizes: 20, 30, 50, 80, 120 mm with standard stroke between 5 and 100 mm Backlash-free clamping Compact sizes Adjustment with knurled micrometer knob (standard) or hex screwdriver High load ratings Guides without play High damping Scale with knurled micrometer knob Mounting kit (clamps) Easy and quick to combine to 2 axis systems and/or 3 axis systems Optional position readout (starting from size 30 mm)

https://www.lindner-kunststoffprodukte.de/en/child-resistant-packaging/

The CSN® HECT, HEVT and HECT/VT by Schniewindt combines proven sensor technology and opticaldigital data transfer according to the standard IEC 6185092, creating a future orientated solution for applications in high voltage AC substations. The required values to be measured are recorded in analog signal form by conventional sensor elements (R/C high voltage divider for voltage measurement and Rogowski coil for current measurement) on HVline potential and transferred to the RemoteDataModule (RDM) mounted in the head construction of the instrument transformer. The RDM converts the recorded data into a digital serial protocol and transmits them via optical fiber to the Merging Unit (MU), located in the control room. The distance between instrument transformer and MU can be up to 1 km. The MU transfers the data protocol of three instrument transformers into the protocol according to IEC 6185092. For signal output

Filter + lubricator combination of the Comfort series Sizes: 1/4" to 1" Filter fineness: 5 – 20 – 50 µm Flow at 6 bar with ∆p 1 bar: 1350 to 5000 Nl / min Pressure range up to 15 bar

single inlet/outlet line or combined inlet/outlet line with stationary or rotating syphon pipe universal usecooling, heating, clamping series with ball bearings, graphite bushbearing or solid grease ballbearings bellows sealing available in stainless steel CDCartridgeDesign PRESSURE MAXIMUM 6,0 bar heat transfer oil 10,0 bar air nontoxic gases steam 17,0 bar water TEMPERATURE MAXIMUM 300 °C air heat transfer oil nontoxic gases steam vacuum water SPEED MAXIMUM 600 1/min DN 80 (3") DN 100 (4") DN 125 (5") SIZEDN 80 (3") DN 100 (4") DN 125 (5")

The ideal combination of slicing and weighing: Ergonomic, easy to clean, easy to operate, energy-saving. Ideal for all manual slicing tasks such as cooked ham, boiled and cooked sausages, sliced cheese or long-life goods such as salami and air-dried ham. Furthermore a space-saving solution if metrologically approved weighing for the sales counter and manual slicing in one place are requested. Operation is particularly easy thanks to a Ceraclean® surface with outstanding gliding properties, technically mature ergonomics and thus absolutely safe for the user. Removable parts are dishwasher safe and can be mounted in a flash. The Ceraclean® surface finish is very easy to clean.

Upenders are designed to safely tilt big and heavy coils – either from horizontal into vertical or reversed. This fast and easy coil handling solution gets rid of “adventurous” tilting methods that often will endanger the operator. Chains and other lifting aids which damage the coil rims become obsolete. Upenders allow 90 degrees tilting of coils; Combination machines will also rotate 180 degrees. Both can handle up to 25 tons.

The thermoIMAGER TIM QVGA and TIM VGA cameras are used for stationary thermography tasks where high resolution is required. Due to their high thermal sensitivity, these cameras also detect even the smallest of temperature differences. Both standard lenses and special microscope lenses are available for the TIM QVGA and TIM VGA cameras. The microscope lens enables detailed macro shooting of the smallest of elements. High-resolution macro shooting is possible with a spatial resolution of 28 µm. The distance between the target and the camera varies between 80 mm and 100 mm.

In form, double strength. For the optimum processing of your individual requirements we simply combine our transfluid forming techniques, as simple as that, in particular the axial forming and the rollforming. The additional clamping unit makes even extreme forming feasible in one work sequence. The cutting before the axial tube forming is also possible, as well as the rollforming of a preformed geometry. That saves you valuable time. A strong partnership axial forming and rollforming. Our t form combination machines is the perfect union of axial and rolling tube processing, with up to 6 axial forming steps, two rollforming stations, two powered tool holders for flange orientation and an additional clamping unit. The horizontal clamping system makes the processing of bent tube geometries possible.

Based on our Unipower Series we evolved this series to the next step with a slider system and a customized self-finding plug concept. More over a cluster management system is integrated, that several batteries can be controlled in one system.

The multifunctional TF4000 by FESSMANN combines highest production capacities with best quality. In the continuous system, the products go through several heat treatment and cooling units, and leave the machine ready for packaging. The innovative serpentine conveyor technology achieves the shortest process times at the lowest weight loss – and decisively reduces the amortisation time of the system!Considerable saving of energy costs Use of any smoke system possible Only 25% of the space demand of batch systems for best return on very small space Fully automatic control and monitoring of the production processes Temperature and humidity can be controlled separately in every treatment zone Unparalleled hygiene, separation of goods input and output (HACCP) Outstanding quality results in colour and flavour at minimal weight loss as compared to batch systems

The term metal bellows refers to a structure that is composed of one or more stainless steel sleeves fitted into one another and is rendered elastic by the introduction of parallel corrugations. Metal bellows can be arranged to complete combinations of metal bellows (expansion joints). Thus, every specific requirement can be met. As raw material for the sleeve production, stainless steel strips or sheets with a thickness of 0.15 - 3 mm in the standard grades are used: 1.4541 / AISI 321 1.4571 / AISI 316Ti 1.4404 / AISI 316L 1.4307 / AISI 304L                                                              material with high chemical resistance and temperature resistance:   1.4435 / AISI 316L 1.4539 / AL 904L 1.4878 / AISI 321H 1.4828 / AISI 309 1.4462 / AISI 318 LN 1.4410 / AISI F53 or additional special materials:      1.4876 / Incoloy 800HT 2.4858 / Incoloy 825 2.4856 / Inconel 625 2.4816 / Inconel 600 2.4610 / Hastelloy C-4 2.4819 / Hastelloy C-276 2.4602 / Hastelloy C-22 3.7035 / Tit

The ROTOKOMBI system allows all rotary union and slip ring types to be combined. The result is a complete rotary transmission system from a single source, with perfectly matched interfaces. ROTOKOMBI systems ensure that an optimally adapted sealing system is available for any medium. For any type of electrical transmission a corresponding system is selected to ensure adequate reliability. Thanks to the modular design, individual components can be replaced, retrofitted or upgraded as necessary. All components are selected and combined to meet your specific demands, without limitations to the number of electrical poles, media or size. Special solutions such as ATEX/IECEx or certifications according to UL/CSA regulations are also available on request.

With the new generation of our combination machines, we have continued to develop the new diversity for forming pipes. Geometries that effectively replace high-cost and expensive turned parts can be formed directly at the pipe end in the endforming machine – for a final component of a single workpiece that is ready for use without elaborate soldering or welding. Implementation of the combination can be specified by you or based directly on the forming geometry. This is usually done using up to 6 axial forming stages and at least one rotary unit. Trimming, as well as axial and rotary forming, may require 2 rotary forming stations. Simple trimming or deburring after forming at the pipe end are no demanding challenges. Therefore, all our axial forming machines and combination machines are equipped with one or several single-drive axes. They have a servo-electrical drive and can be used in each of the holders for the forming stages, making the system is very flexible and compact.

Our geared motors are configured from a modular range of motors and gearboxes that are designed for a perfect match. Our modular system enables us to implement solutions tailored to meet your needs quickly and costeffectively using standardized sub-assemblies to create offset geared motors, angular geared motors and helical geared motors. This saves you valuable project engineering time – and gives you the certainty of reliable specification. At the same time, you benefit from our extensive design and application expertise in every module.

The entry-level model for dry areas Bizerba CWDmaxx series checkweighers are designed as entry-level models for up to 250 weighings / minute. Due to its IP54 protection the CWD is the first choice for all applications not requiring wet cleaning. A built-in VARICON metal detector transforms the dynamic checkweigher CWDmaxx into a complete inspection system in compliance with HACCP, IFS, BRC and others.

Freely combinable components, networked functions and more performance. The Bizerba K-Class Flex II Pro series provides you with functions for the modern daily routine in retail: Weighing, labeling, advising customers and transactions are possible with this scale. Communicate information, advertising contents and cross selling campaigns via a brilliant customer display. A powerful and open PC platform ensures high performance: The large RAM has sufficient memory to let you implement new features or individual requirements. Even the use of 3rd-party software is easily possible. Freely combine components such as displays, printer, CPU or load receptor. Use the Flex solutions with a cash register drawer as a powerful cash register system. Gain more freedom thanks to unhindered access to the sales counter. Enjoy ergonomic working. Even with a minimum of space.

Combination of welding outlet and flange Nipoflange in pipeline construction A nipoflange is used in pipeline construction just like a welding outlet or a nipple outlet for a 90 ° branch. A Nipoflange is a combination of welding outlet, nipple outlet and flange. Further terms for Nipoflange are Weldoflange or Flangeolet. Two different branch sides On the pipe branch side , a nipo length has the shape of a welding outlet. This means that the branch from the pipe is made with a welded joint. There is a flange on the connection side, ie a flange connection is created. The flange can be designed according to customer requirements (usually according to DIN or ANSI). Nipoflange as a forged fitting A nipoflange (similar to ANSI B 16.9 / MSS-SP 97) is usually made from a forged blank. This means that a Nipoflange is a forged fitting and has no welds.

Universal Adapter between VOLFI Stackable Support or Twist Pedestal and VOLFI Basic Support. Can be used in all VOLFI systems to achieve varying joint widths.

The term metal bellows refers to a structure that is composed of one or more stainless steel sleeves fitted into one another and is rendered elastic by the introduction of parallel corrugations. Metal bellows can be arranged to complete combinations of metal bellows (expansion joints). Thus, every specific requirement can be met. As raw material for the sleeve production, stainless steel strips or sheets with a thickness of 0.15 - 3 mm in the standard grades are used: 1.4541 / AISI 321 1.4571 / AISI 316Ti 1.4404 / AISI 316L 1.4307 / AISI 304L                                                              material with high chemical resistance and temperature resistance:   1.4435 / AISI 316L 1.4539 / AL 904L 1.4878 / AISI 321H 1.4828 / AISI 309 1.4462 / AISI 318 LN 1.4410 / AISI F53 or additional special materials:      1.4876 / Incoloy 800HT 2.4858 / Incoloy 825 2.4856 / Inconel 625 2.4816 / Inconel 600 2.4610 / Hastelloy C-4 2.4819 / Hastelloy C-276 2.4602 / Hastelloy C-22 3.7035 / Tit

The term metal bellows refers to a structure that is composed of one or more stainless steel sleeves fitted into one another and is rendered elastic by the introduction of parallel corrugations. Metal bellows can be arranged to complete combinations of metal bellows (expansion joints). Thus, every specific requirement can be met. As raw material for the sleeve production, stainless steel strips or sheets with a thickness of 0.15 - 3 mm in the standard grades are used: 1.4541 / AISI 321 1.4571 / AISI 316Ti 1.4404 / AISI 316L 1.4307 / AISI 304L                                                              material with high chemical resistance and temperature resistance:   1.4435 / AISI 316L 1.4539 / AL 904L 1.4878 / AISI 321H 1.4828 / AISI 309 1.4462 / AISI 318 LN 1.4410 / AISI F53 or additional special materials:      1.4876 / Incoloy 800HT 2.4858 / Incoloy 825 2.4856 / Inconel 625 2.4816 / Inconel 600 2.4610 / Hastelloy C-4 2.4819 / Hastelloy C-276 2.4602 / Hastelloy C-22 3.7035 / Tit

This humidity and temperature probe with digital interface is, in combination with the B+B HYTELOG USB or RS232 devices, an efficient measuring and recording system for relative humidity and temperature.