Results for
VISCOTEC PUMPEN- U. DOSIERTECHNIK GMBH
Germany
The compact 3VPHD8 Pharma Dispenser enables precise and reliable dosing of a wide variety of materials. Thanks to the special rotor-stator-geometry, no valve is required to prevent the medium from flowing out independently. Alternating opening chambers ensures gentle product transport and pulsation-free output. The VPHD series was specially developed for applications in the pharmaceutical, biotechnology, medical and food industries. Your advantages: - Interior with optimised dead space - Design according to EHEDG guidelines - FDA-compliant design/development - hygienic and pharmaceutical design - Works certificate 3.1 (DIN EN 10204) - all surfaces for pharmaceutical applications Ra ≤ 0.8 μm - retraction option (no dripping or thread pulling) - absolutely linear relationship between rotor speed and spread rate - long service life due to media-specific component selection
Request for a quoteB+B AUTOMATIONS- UND STEUERUNGSTECHNIK GMBH
Germany
To serialize vials and other cylindrical products, we rely on the proven quality and reliability of our labelers. In order to achieve the best possible grading of the serialisation barcodes, we integrate thermal transfer printer or marking laser units directly on the label applicator. The vision system immediately inspects the print data after the printing process. If the inspection shows a negative result, we optionally offer a label reject station which automatically removes the label from the process and therefore does not waste a „good product“. Both the vision system and the print engine are fully integrated in the touch panel HMI. Shift registers in the label applicator as well as in the complete system enable product and label tracking through the complete system.
Request for a quoteB+B AUTOMATIONS- UND STEUERUNGSTECHNIK GMBH
Germany
The LSS-PV model was developed to serialize small product batches cost-effectively and according to the requirements of country-specific FMD guidelines. The products are fed manually. A transport system with product carriers guarantees a precise and continuously accurate alignment of the products. After the printing process performed by a thermal inkjet printing system (TIJ), the print data is inspected. If the inspection result is positive, the products are either collected on the collection table at the outfeed of the system or glide over an optionally available transfer plate into an outer shipping case. Defective products are reliably separated from the GOOD products by the product reject station. This process is verified twice in the PLC.
Request for a quoteB+B AUTOMATIONS- UND STEUERUNGSTECHNIK GMBH
Germany
The products are manually placed on the conveyor belt, printed from above and collected at the end of the system. The portable system is equipped with a Wolke m610 Touch thermal inkjet system. An upgrade to a manual serialisation system with b+b Linemanager and Full Vision System is optionally available. The conveyor belt is driven by a powerful stepper motor with constant speed. The conveyor belts are provided with crossbars at regular intervals to achieve constant product guidance and thus a consistent print result. The distance between the two toothed belt conveyors can be easily adjusted in order to process different product widths. For processing slightly slanted products, the positions of the crossbars can also be adjusted to each other.
Request for a quoteB+B AUTOMATIONS- UND STEUERUNGSTECHNIK GMBH
Germany
This workstation enables the manual serialisation of drug packages and their aggregation into shipping cases. For this purpose, each individual box is first printed with order-related serialisation data by a thermal inkjet printing system as it passes by and then manually placed in a shipping carton. As soon as it is filled, the downstream thermal transfer label printer creates an individual serialisation label. The correct print data and print quality are permanently monitored by a vision system. The operator places the medicine products to be serialized on a reference edge at the infeed. As soon as the thermal inkjet printer has printed the serialisation data, the integrated vision system checks that the data is correct. If an error is detected (e.g. insufficient grading), the product stops at a certain position marked by red LEDs. The removal of the rejected product must be confirmed by pressing a button on the HMI.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
B+B AUTOMATIONS- UND STEUERUNGSTECHNIK GMBH
Germany
s with the MS-PV-AG model, the products are fed manually by the operator. Product carriers and adjustable guide rails ensure a stable product transport. As soon as the thermal inkjet printer has printed the serialisation data, the integrated vision system checks that the data is correct. If an error is detected (e.g. insufficient grading), the product is removed from the process and fed to a lockable collection box. It is not taken into account during the formation of the aggregation pedigree and is ejected and marked in the shift register as soon as the error is detected. As soon as the filling quantity per carton is reached according to the specified packing scheme, the system automatically generates a serialized label for the shipping carton. It is applied manually by the operator and confirmed by a handheld scanner that the aggregation label has been applied.
Request for a quoteB+B AUTOMATIONS- UND STEUERUNGSTECHNIK GMBH
Germany
The MAT model series serves as a mobile terminal for all aspects of aggregation and rework. Aggregation and rework can take place over several levels. The devices are available in the following expansion stages: MAT-C Manual aggregation and rework station (1 level) (boxes – shipping cases) MAT-P Manual aggregation and rework station (1 level) (shipping cases – pallets) MAT-CP Manual aggregation and rework station (2 level) (boxes – shipping cases – pallets)
Request for a quoteB+B AUTOMATIONS- UND STEUERUNGSTECHNIK GMBH
Germany
The STS-T series is based on high-resolution image chips and is available with resolutions of 12, 20 or 30 megapixels. With the real-time autofocus, any number of barcodes, even if they vary greatly in height, can be easily and reliably captured without mechanical or manual adjustment. For this reason, the system also finds its place in the incoming goods department of large pharmacies or re-importers (in entrance module mode). The field of view of 600 mm in width and 400 mm in depth is marked on the base frame. The shipping cases can have a height of up to 380 mm.
Request for a quoteB+B AUTOMATIONS- UND STEUERUNGSTECHNIK GMBH
Germany
This powerful HSF friction feeder is the optimal solution when empty folding boxes have to be marked with variable data offline from the production line. The modular design of the system enables an easy integration of the desired marking technology. The HSF separates the folding boxes from the stack in the infeed magazine. The cartons are guided to the printing station by two parallel running belt conveyors. Print information could be e.g. serialisation data in the form of bar codes or data matrix codes and text. Depending on requirements, thermal inkjet, laser coders or label print- and apply systems can be used (also in combination). The printed data is inspected and verified by an integrated vision system. The b+b Linemanager recognized all 21CFR Part 11 data for each serial number and is able to report this back to the Siteserver system (e.g. b+b Siteserver).
Request for a quoteWHITESTEEL GMBH
Germany
- Compact design - Made up to the ISO, FDA and EU, GMP and cGMP international standards - Can handle multiple cups shapes and sizes - SCADA system included - Touch screen included - Capacity is adjustable up to your needs - Can be used For all liquid substance including alcohol, sanitizers, hand gel, and more
Request for a quoteResults for
Chemicals and pharmaceuticals - packaging machinery - Import exportNumber of results
11 ProductsCountries
Company type