Chemical dosing equipment - Import export

Our ecoPEN  XS is a true volumetric dispensing system that applies the smallest amounts of singlecomponent fluids – for highprecision dispensing technology. Thanks to the proven endless piston principle, watery to pasty liquids are perfectly dispensed. A clean, processreliable dosage is achieved regardless of fluctuations in viscosity. - Dimensions (without cartridge and holder): length 178 mm, width 22 mm, depth 65 mm - Weight (without cartridge and holder): 175 g - Operating pressure: 0 - 6 bar - Max. dispensing pressure: 20 bar - Self-sealing: Approx. 2 bar - Viscosity: watery to pasty - Volume flow: 0.0044 - 0.35 ml/min - Min. dispensing quantity: 0.25 µl - Dosing accuracy: ± 1% - Stator material: vidur-C1 - Material inlet: Luer-Lock adapter for cartridge (cartridge can be rotated 360°) / Adapter for hose connection (Ø - 3mm) - Material outlet: Luer-Lock (patented) - Wetted parts: POM / vidur-C1 / stainless steel / HD-PE - Repeatability: > 99 %

The verifiable weight indicator X3 ensures fast and reliable display of the weight values. With the integrated EasyFill® application, filling with liquids, powders or granules can be controlled. High-precision weight indicator offering a resolution of up to 120,000 increments Large, clearly readable display of weight values, even in direct light Convenient and efficient scale calibration in one minute without weights Remote configuration and service functionality through integrated website EasyFill® function for one-component dosing of liquids, powders and granules with configurable target, tolerance and overshoot values Multiple data interfaces allow easy integration into process control systems and direct connection of a printer or remote display Housing suitable for panel mounting

▪ Continuous volumetric and pulsation-free dosing regardless of viscosity ▪ For low viscosity and self-levelling materials (e.g. trickle resins) ▪ Low wear solution due to avoidance of material contact at shaft seal ▪ Uninterrupted production thanks to material reservoir with up to 350 ml usable volume ▪ Pressure and temperature sensor including sensor holder at pump outlet ▪ Level programmable using analog level sensor ▪ Filling under atmospheric pressure ▪ Optional connection for process gas (max. 0.2 bar pressure) ▪ Dispenser holder for easy and stable installation ▪ Increased process reliability due to integrated safety device ▪ Dividable rotor assembly for easy & fast replacement and low spare part costs

▪ Modular setup with five different available dispenser sizes on each side ▪ Static mixing of two materials with same or different viscosities ▪ Adjustment of the desired mixing ratio by adjusting the speed ratio of both dispensers ▪ Volumetric dosing, regardless of viscosity ▪ For low to high viscosity materials ▪ Particularly suitable for abrasive, filled or shear sensitive materials ▪ Continuous dosing, pulsation free ▪ Interior non-stick coated ▪ Linear relation between dosing volume and rotation speed ▪ Programmable suck-back prevents dripping or stringing of product ▪ Different rotor and stator materials available as standard ▪ Long service life due to application-specific rotor-stator combinations ▪ Easy cleaning and maintenance due to quick assembly and disassembly options ▪ Mixing ratio 1:1 - 100:1 ▪ Volume flow of 0 - 1,300 ml/min (depending on mixing ratio, material and dispenser combination)

The ViscoMT-L 3 / 18 barrel emptying system offers a modern way of emptying containers.The connection with the ViscoTec VMP dispenser series for the removal of the medium offers the following advantages: - container sizes from approx. 50 l to 300 l - viscosities of approx. 80,000 - 2,000,000 mPas - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - removal of materials loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: Removal of materials directly from the delivery container, e.g. silicones, adhesives, resins, greases, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes) - supply of media to dispensers

Gewinde 28/400 & 28/410

The ViscoMT-XM barrel emptying system with volumetric pump based on the endless piston principle. Your advantages: - for medium to high viscosity products (up to 7,000,000 mPas) - suitable for abrasive, shear-sensitive or lumpy materials loaded with fillers - clean wiping of the inside wall of the barrel due to follower plate with special sealing lip - suitable for cylindrical, ribbed or slightly conical barrels, plastic containers or containers with inliners - no lateral squeezing of the medium, as the follower plate is guided almost without pressure - discharge speed electronically adjustable - easy handling - pulsation-free conveyance/discharge - Residual quantity in the barrel: < 1% - compact design Application: Withdrawal of products directly from the delivery or storage container, e.g.: Tomato paste, honey, fats, icing, mascara and much more. pressure-controlled or level-controlled feeding of the products to filling machines or mixing processes.

The ViscoTec dosing and filling pump RD-Hygiene for food and cosmetics is a volumetric pump based on the continuous piston principle. It is ideally suited for discontinuous or continuous pulsation-free dosing of viscous, structure-sensitive and solids-laden media. Thanks to the high-quality ViscoTec dispensers, high-precision dosing applications can be realized in the food and cosmetics sector. The systems are used e.g. in the bakery and confectionery sector for decoration. Typical doses are icing or fondant, but also fillings such as vanilla or chocolate cream. Your advantages: - Specially adapted filling tubes for a wide variety of filling applications - Application and dosing in automated systems - Low to high viscosity as well as abrasive, shear-sensitive or lumpy media - hot and cold filling - Optimum results for CIP/SIP (Cleaning in Place/Sterilisation in Place) cleaning

▪ Automated emptying system for containers up to approx. 30 liters ▪ Volumetric conveying progressive cavity pump based on the endless piston principle ▪ Pulsation-free and precise emptying and material supply to 1C and 2C dispensing systems ▪ In redundant dosing systems applicable ▪ For medium to high viscosity materials ▪ For structure sensitive, filled, abrasive materials ▪ Application for cylindrical or slightly conical metal and plastic containers ▪ Housing for machine safety and protection against dirt contamination ▪ Automatic retraction and venting the container as well as detection of media surface ▪ 4“-Touch panel with function keys for comfortable setting and parametrization of the system ▪ Externally controllable via Profinet interface ▪ Continuous determination of the position of the follower plate and level monitoring ▪ Adjustable pressure reduction for longer pauses

— Universal loss-in-weight feeder for virtually all flowable ingredients (powders, pellets, flakes, fibers, etc.) — Flexible polyurethane hopper agitated by amplitude adjustable paddles for consistent screw filling and mass flow of ingredient without degradation — Interchangeable screws and screw tubes allowing quick adjustment to changing ingredients and feed rates — Optional separate paddle motor to allow paddle speed adjustment for difficult flowing ingredients (not available for FW20) Power range - Different versions 1-25570 dm³/h

The SOMOS® Gramix ExactDos dosing system is specifically designed for ultra-small volumes from a minimum throughput of 200 g/h (approx. 3.3 g/min) and can be combined with any continuous dosing unit.

SAVEOMAT Satellite is the innovative vacuum conveying system in which the suction capacity can be split as required. The valve technology on the vacuum manifold allows the power to be split between different material separators. A control of the applied vacuum ensures a constant vacuum during material conveying and guarantees a delay-free material supply. Complete extrusion lines or entire production halls can thus be supplied via a single or several vacuum generators connected in parallel. The suction power is applied as needed for each individual component, ensuring careful feeding, even of critical materials. Other advantages/features: — Splitting of the suction power according to requirements — Simultaneous conveying of several material separators — Vacuum is available immediately — Careful material conveying — Reduction of energy costs — Suitable for PE, PP and PVC granules

SAVEOMAT P is a funnel weigher specialized for the blockage-free feeding of powder with a maximum chalk content of up to 20%. Thanks to the optimal hopper geometry, an enlarged inlet, turbine vibrators at the hopper inlet and the storage hopper outlet, material deposits and bridging are avoided. This ensures a stable production flow and a constant material flow with a consistent minimum weight per meter. Other advantages/features: — Special hopper geometry for optimum flow behavior of powder with up to 20% chalk content — Blockage-free feeding of easily sticking material — Dust and moisture proof — Compensation of bulk density fluctuations — Enlarged weigher inlet and outlet

The flexibly combinable dosing station allows the exact blending of up to seven material components. Two configuration levels are available the DOS 2 (one main and one side component) and the DOS 7 (one main and up to six side components). Dosing is carried out according to customer-specific requirements. The processing of granules and powder is also possible. The dosing station can be flexibly equipped with different funnel weighers and thus fulfills the most demanding processes of gravimetric weighing. Common applications include film extrusion or PVC pipe production with complex formulations. Other advantages/features: — Suitable for complex recipes and special applications — Individually and flexibly configurable (DOS 7 also as 6-component dosing without main component available) — Hopper scale sizes of main and side components freely selectable — Variants for granules and powder

SOMOS® Volmix from ProTec is a highly accurate volumetric dosing and mixing system. Volmix stands for VOLumetric dosing and MIXing. The system supplies injection molding machines as well as extruders or blow molding machines with throughputs of up to 2,500 kg/h. A high-accuracy small-volume dosing unit for regrind for a throughput as low as 150 g/h is available as an option.

The SOMOS® Volmix MH15 volumetric small-volume dosing unit continuously and highly accurately meters granular or pulverulent minor components (masterbatches, additives etc.) into a freely inflowing major component (pellets). A dosing screw introduces even tiny volumes into the process without pulsation. Five screw sets are available for adjusting the volume to be introduced. A static mixer finally ensures that a homogeneous mixture of the major and minor components flows into the processing machine.

SAVEOMAT G is the basic version of the SAVEOMAT series. The Mono weighing hopper are suitable for granules and are available in different heights. Depending on the control loop, they use the measured values to control the screw speed of the extruder or the haul-off speed. This increases production output, reduces raw material consumption, and ensures substantial savings. Control takes place via an intuitive user interface and offers numerous software functions. Other advantages/features: — Optimal hopper geometry for perfect flow behaviour of the raw materials — Overload protection of the load cells — Dead zone free filling and weighing

The SOMOS® Gramix FlakeDos dosing system is ideally suitable for gravimetrically dosing PET bottle flake (bulk density 250 to 600 g/l). The system can optimally and directly process the flakes without premixing.

SAVEOMAT Liquid is the multi-component dosing station for the recipe-precise dosing of solid and liquid components. The use of silane and peroxide is especially applied in PEXa and PEXb pipe extrusion and cable production. Precise mixing of the raw material is achieved by combining a static and a dynamic mixer. An injection tube is integrated in the dynamic mixer, whereby the peroxide or silane is introduced and ensures uniform wetting. Thanks to its safety features, SAVEOMAT Liquid meets the highest safety requirements while allowing a wide range of recipes. Other advantages/features: — Recipe-accurate dosing and conveying —Constant wetting of the raw material — Meets the highest safety standards — Dosing and mixing of materials under inert gas atmosphere — Reduction of the peroxide percentage by approx. 10 % through uniform and continuous metering

FUNCTIONAL PRINCIPLE The SOMOS® Gramix TwinDos dosing system supplies twin screw extruders in the "underfed" mode required for such extruders. Optimized hardware and control software ensure extremely short system response times, the weighing electronics operating with 24 bit signal resolution. For example, the system even responds automatically to changing regrind consistencies and optimizes itself by appropriately readjusting the metered components. No software adaptation (e.g. using appropriate material characteristic curves) is required for this purpose. The closed dosing system releases little dust and can be installed directly on the processing machine, so saving space.

SAVEOMAT HF is the dosing unit for materials with a chalk content of up to 100%. A consistent material flow is ensured at all times. Depending on the material and application, the SAVEOMAT HF has either a twin-screw or a spiral dosing unit, with which the products are dosed smoothly and cleanly. Both variants can be combined with other powder and granule weighers. Further advantages/features: SAVEOMAT HF twin screw — Co-rotating and self-cleaning twin screw conveyor — Very regular feeding of the material — Agitator in the hopper directly above the twin screw — Separate motor for the agitator — Special screw for feeding chalk SAVEOMAT HF Spiral — Agitator in hopper directly above the spiral — Separate motor for the agitator — Special spirals for PVC dosing — Easy change of the spiral

The Batchmix 50 to 3000 models cover gravimetric dosing applications with throughputs of 5 to 3,000 kg/h. Usable for pellets and regrinds. Solutions for special applications are available. Depending on size, the machines can handle between 4 and 12 different materials and option packages are available to extend their functionality. The unique mixing technology used maximizes the dosing accuracy and uniformity of the mixed product.

SPECTROFLEX V is ideally suited for dosing powders, pellets, regrind, granulates, flakes and fibers in continuous processes. motan's unique interchangeable system provides two huge advantages over common dosing units. Firstly, the user can swap the quick exchange modules in less than one minute easily without any tools. Furthermore, the single and twin screw exchange modules are also interchangeable, allowing the user to configure the feeder for nearly any type of material in a matter of minutes.