Results for
SCHWEIZER GMBH & CO. KG
Germany
Piston valves for petrol or oil lines. The valves prevent the line from draining after the pump has been switched off. This type of valve is only used in applications above 5 bar. The opening pressure is set to the corresponding counter pressure.
Request for a quoteQUELLTECH GMBH
Germany
Laser sensor Q4 – with a small form factor – Q4 for standard 2D / 3D measuring applications: Low sensitivity against influences of secondary light Measuring ranges from 5 mm to 1000 mm Laser wave lengths starting from UV via blue, red and green through to IR Average measuring speed up to 350 Hz frame The Q4 laser sensor has been designed to meet the requirements of standard measuring applications. Thanks to its increased flexibility, it can be used for several tasks also in complex projects. The dimensions of the ultra-compact version amount to only 86x40x25, at a weight of 140 g. Protective panes and cooling modules are available as an option. The Q4 laser sensor model enables users to obtain stable measuring results also on difficult surfaces, whether mirroring or transparent. The QS-View Standard Software comprises a comprehensive selection of application modules, to be invoked at once without previous programming steps. Customized adaptations are possible any time.
Request for a quoteQUELLTECH GMBH
Germany
Particular Challenges: The seal surfaces in this case are made of very glossy metal, with the drawback of emitted reflections. This effect during an optical measurement must be eliminated. Furthermore, it is absolutely necessary to guide the laser scanner on a linear path over the surface, since fluctuations of distance may falsify the measurement result. QuellTech Solution: The Quelltech model Q5 disposes of an adequate resolution in X and Z direction and proves to be able to verify the planarity tolerances and to measure the size of defects. Meanwhile a precise rotary axle, used as guiding element, moves the scanner over the surface to be evaluated. Interfering artefacts caused by the glossy finish are suppressed by particular algorithms integrated within the software. As an encoder value is permanently supplied by the rotary axle, the position of each scanner profile within the point cloud can accurately be determined.
Request for a quoteSCHUBERT & SALZER CONTROL SYSTEMS GMBH
Germany
Robust stainless steel check valve with high flow capacity for aggressive media and high operating temperatures.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Non-return valves for in-line installation, series VR, made of nickel-plated brass. With threaded connection and/or hose plug-in connection.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Check valves in stainless steel for line installation for demanding applications and high frequencies. Available in sizes 1/8 to 1".
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
The precision Pt100 simulator is used wherever measuring instruments or controlling systems have to be tested or calibrated with great precision. The standard version model 4506 simulates 24 set temperature values. Totally different temperature ranges are required in the case of special applications, such as in the food industry, the medical science etc. Model 4506 S is recommended for these applications and can be fitted with 24 temperature values according to customer specifications. A distinctive feature of these simulators is their simple operation. The resistance values required for simulation are directly set in °C. There is no need to use loof-up tables. Today in many cases a certificate is needed more than ever force measurements. This certificate is available under order code 45DKD-.. . Features: 24 set temperature values Calibration per DIN EN 60751 Resistor material: MANGANIN®, TK ≤ 10 ppm/K Pt100, Pt500, Pt1000 Available with DKD Certificate if required
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Throttle valves and throttle check valves in stainless steel for applications in aggressive environments, food or pharmaceuticals. Available in sizes 1/8 to ½". Larger dimensions on request.
Request for a quoteZOLLER & FRÖHLICH GMBH
Germany
State-of-the-art manufacturing techniques are used in our electrical workshop. The world-renowned and appreciated Z+F machines are used for wire processing. These assure a high quality standard of the final product and allow great time savings in the manufacturing process. Thereby we can offer our customers a good and fair price-performance ratio. Individual marking of wires is supported. UL approvals are also possible.
Request for a quoteMES TRADE GMBH
Germany
BPAfree TRITAN water bottle Nonslip SILICONE grip Silicone spout for comfortable drinking The drinking area is protected against dust thanks to the protective cover 100% leakproof with the silicone plug system and lid lock developed against leaks Ease of drinking with the fixable lid Possibility of onehanded use Does not smell Can be washed in the dishwasher. Resistant to impacts and breaks thanks to TRITAN material Carrying apparatus made for easy transportation Provides easy grip and transportation thanks to its ergonomic structure Specially designed nonslip areas on the covers Environmentally friendly with longlasting use Clear and smooth surface like glass with TRITAN material
Request for a quoteETH MESSTECHNIK GMBH
Germany
Testing equipment for quality control and material optimization of die-cast aluminum parts, strength test Quality control of injection molded parts; Predetermined breaking point Hand control robust construction Evaluation via GMV2
Request for a quoteSAMAG MACHINE TOOLS GMBH
Germany
QUICK CHECK GUN DRILL Eight basic cycles, based on experience, are included in the scope of delivery of the machine and guarantee professional processing of the workpiece. Specific groups for cross drilling cycles are available as an option. This makes workshop programming and programming of crossing holes easier by adapting the feed when hitting the cross hole. This increases the tool life significantly.
Request for a quoteETH MESSTECHNIK GMBH
Germany
Customized Solution The mobile testing device may be mounted directly on the wheel nuts on any wheel on the car. The height and tilt adjustment allows optimal orientation at the wheel. Additionally, it is still supported by three proximity sensors. The evaluation and control of the testing device accepts a laptop. For easy transport, the device can be disassembled in a few steps. Curve recording and analysis via notebook. The complete unit is height adjustable via a scissors system. This can also be adapted to different shaft height.
Request for a quoteETH MESSTECHNIK GMBH
Germany
Friction measurement on gear with cam recording with service case In order to reduce the frictional torque in a gearbox from the automotive industry, a measuring device that accompanies the development is required. With the DPFR-027, changes in the design can be measured directly on the product. This means that even the smallest improvements can be determined. The field of application of this test device is extremely diverse and can be easily converted to other applications. Thanks to the mobile design, tests can be carried out under different temperatures and climatic conditions. hand-held drive unit compact slim design constant load-independent test speed selectable direction of rotation and speed additional storage to eliminate lateral forces Acquisition of torque and angle of rotation Graphic recording of the test sequence Storage of the test results in Excel
Request for a quoteETH MESSTECHNIK GMBH
Germany
Mobile Mobile friction measurement for gear optimization 5 Nm or 30 U/min With the DPFR-036, changes in the design can be measured directly on the product. Even the smallest improvements can be identified. The area of application of this test facility is extremely diverse and can be easily implemented for other applications. The mobile design enables tests to be carried out under different temperatures and climatic conditions. Special features constant test speed independent of load selectable direction of rotation and speed Additional storage to eliminate lateral forces Acquisition of torque and angle of rotation Graphical recording of the test procedure Simultaneous viewing of up to 20 variable test sequences from the database in color Option OK and NOK signal lights
Request for a quoteTIE SOLUTION GMBH
Germany
Our pocket squares with small check patterns are handmade and represent Italian timeless elegance. The size of this luxury-designed pocket square is 30 x 30 cm. Made of 100% microfiber to ensure more stability. Finest microfiber, with the best craftsmanship and highest weave density, shines in the most beautiful color combinations. An elegant eye-catcher from Italy. This pocket square collection will perfectly complement your personal gift for occasions such as corporate gifts, birthdays, or Christmas. Can be personalized.
Request for a quoteTIE SOLUTION GMBH
Germany
Tie Solution specializes in exclusive hand-sewn silk ties. Our products are made from natural high-quality silk with a wool lining. We pride ourselves on producing high-quality ties for men, with each tie customizable with your logo. We exclusively use natural raw silk sourced from top European suppliers, ensuring the utmost quality in our exquisite ties. Our TIES product line combines a six-ply thread with fine wool or cotton threads, resulting in superior quality, contemporary design, and stylish composition. Each tie showcases skilled craftsmanship and refined elegance. With a minimum order of just 50 pieces, we can customize ties in your desired house color, with or without a logo. Personalization options are also available.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
EICHSFELDER SCHRAUBENWERK GMBH
Germany
Check link (plastic coated)
Request for a quoteEICHSFELDER SCHRAUBENWERK GMBH
Germany
(check link + rivet + clevis door check)
Request for a quoteEICHSFELDER SCHRAUBENWERK GMBH
Germany
Check link (plastic coated)
Request for a quoteEICHSFELDER SCHRAUBENWERK GMBH
Germany
Check link (plastic coated)
Request for a quoteREA ELEKTRONIK GMBH
Germany
The REA Check ER is a portable, battery powered barcode verifier. Its manufactures in conformity with international standards in Germany. The REA Check ER is a combination of a very small device which includes the powerful and comfort features of the REA VERIFIER product line. The small size and solid state construction makes this device a perfecr tool for portable barcode verification. The final result "Pass" or "Fail" is the central aprt of the verification report. The still quick available details allow a fast deeper analysis. Product Details: — Built-in battery for portable operation — Cable free in portable operation — Large color display — Built-in memory for up to 1000 reports — USB interface to connect portable printer — Reliable ethernet communication for PC interface — DHCP automatic network configuration
Request for a quoteWALTER STAUFFENBERG GMBH & CO. KG
Germany
Check Valves RV ▪ Allow single-directional flow only ▪ Designed for in-line assembly with female BSP, NPT and SAE threaded connections ▪ Metal-to-metal seat ▪ Maximum working pressure: 500 bar / 7250 PSI (depending on size) Check Valves RVM ▪ Allow single-directional flow only ▪ Designed for in-line assembly with female BSP, NPT and SAE threaded connections ▪ Metal-to-metal seat ▪ Maximum working pressure: 400 bar / 5800 PSI
Request for a quoteWALTER STAUFFENBERG GMBH & CO. KG
Germany
Throttle Check Valves for In-Line Assembly DRV ▪ Throttle and shut-off the flow of liquid media in direction A-B (free flow in reverse direction) ▪ Designed for in-line assembly with female BSP, NPT and SAE threaded connections ▪ Graduated turning knob and coded spindle to accurately control flow ▪ Set-screw located on side of turning knob to lock valve in position ▪ Panel mounting nuts available on request ▪ Maximum working pressure: up to 350 bar / 5000 PSI Throttle Check Valves for Manifold Mounting DRVP ▪ Throttle and shut-off the flow of liquid media in direction A-B (free flow in reverse direction) ▪ Designed for manifold mounting with either 4 or 6 mounting holes ▪ Graduated turning knob and coded spindle to accurately control flow ▪ Set-screw located on side of turning knob to lock valve in position ▪ Panel mounting nuts available on request ▪ Maximum working pressure: up to 350 bar / 5000 PSI
Request for a quoteWALTER STAUFFENBERG GMBH & CO. KG
Germany
Pressure Compensated Throttle Check Valves PNDRV ▪ Throttle and shut-off the flow of liquid media in direction A-B (free flow in reverse direction) ▪ With pressure compensating feature via built-in compensating piston ▪ Designed for in-line assembly with female BSP, NPT and SAE threaded connections ▪ Graduated turning knob to accurately control flow ▪ Set-screw located on side of turning knob to lock valve in position ▪ Panel mounting nuts available on request ▪ Maximum working pressure: 210 bar / 3000 PSI
Request for a quoteWALTER STAUFFENBERG GMBH & CO. KG
Germany
Test Couplings with ball check for normal hydraulic applications and hydraulic applications with high-viscosity fluids. Area of Application ▪ Monitoring and control of pressure ▪ Venting ▪ Sampling in high- and low-pressure systems Advantages ▪ Coupling at system pressure level ▪ Leakproof connection before ball check is open ▪ Simple connection to measuring, control and switching devices Media ▪ Suitable for hydraulic oils and other mineral oil based fluids (Check compatibility of sealing material) ▪ For use in conjunction with other liquid media please consult STAUFF Working Pressure ▪ Max. working pressure 400 bar / 5801 PSI For SMK style G and K the recommended working pressure of fitting manufacturer has to be applied. Materials Metal parts made of: ▪ Steel, zinc/nickel-plated = C6F (CrVI-free) Ball made of Stainless Steel Sealings made of: ▪ P = NBR (Buna-N®) Temperature range -20 °C ... +100 °C / -4 °F ... +212 °F ▪ V = FPM (Viton®) Temperature range -20 °C ... +200 °C...
Request for a quoteResults for
Checks - Import exportNumber of results
53 ProductsCountries
Company type
Category