Results for
RAFI ELTEC GMBH
Germany
RAFI Eltec is a technical services provider that develops and produces electronic assemblies and systems according to customer-specific requirements – from the idea to the finished product. Providing maximum quality for your ideas and products is what motivates us. To achieve this, we introduce our high quality standards to projects even before manufacturing begins. As a result of our expert analysis of customer data, potential pitfalls are eliminated in advance. We document sample productions in detailed test reports and discuss them with you. Due to our state-of-the-art testing technology and our in-house test equipment construction, we increase the quality of your production while simultaneously reducing logistics costs. You can rely on support from the right contact partner for you – whether you are approaching us for the first time or during the production process. We expertly answer all your questions and achieve our mutual goal: your satisfaction and success.
Request for a quoteVOXELJET AG
Germany
• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces
Request for a quoteVOXELJET AG
Germany
• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces
Request for a quoteVOXELJET AG
Germany
• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces
Request for a quoteVOXELJET AG
Germany
• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces
Request for a quoteVOXELJET AG
Germany
• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Forged parts made of steel, stainless steel and aluminum including mechanical processing. Pressed brass blanks including mechanical processing, also on rotary transfer machines. Sintered parts made of sintered bronze, sintered porous brass and stainless steel. Filter elements for air, liquids and fuel made of sintered ball material or mesh.
Request for a quoteINTERNORM KUNSTSTOFFTECHNIK GMBH
Germany
Yellow ejector rings with high-precision polyurethane coating for use in steel service centers.
Request for a quoteSONDERMANN PUMPEN + FILTER GMBH & CO. KG
Germany
without shaft seal robust and casted casing CARTRIDGE UNIT for fast and easy maintenance Temperature up to 120°C (higher temperatures are possible) Close coupled, single stage, back-pullout-design Universal DIN/ANSI connection Suction port DN25 Discharge port DN20
Request for a quoteALUMINIUMWERK UNNA AG
Germany
The purchase of Aluminium alloy billet is an option available to our customers from our on-site Cast house. The billets are cast by conventional direct chill semi-continuous casting using float-dip tube technology. The subsequent homogenisation takes place in one of our two homogenising ovens. We are able to offer short lead times for machined billet in smaller quantities than would otherwise be available. With the wide range of alloys and dimensions we can offer, we will surely find a solution for you.
Request for a quoteFRIEDR. FREEK GMBH
Germany
The Freek heat transfer nozzle heating system especially addresses manufacturers and users who operated their hotrunner nozzles with cast-in heaters in the past and would like to stick to their engineering know-how without paying the high price of this former heater design. The standard material of our Freek heat transfer nozzle heater alternative is brass, with or without coating, preferably with a slit. The slit allows the assembly of an external bendable thermocouple and facilitates the disassembly, e.g. in case of a revision and can be coiled over. This is not possible at competitor's nozzle heater solutions. Freek's tight coiling at the heater's ends provides a maximum possible power concentration (patented).
Request for a quoteKLÖPPER-THERM GMBH & CO. KG
Germany
To maintain constant temperature in your tank or container, we provide the appropriate heating system. This could e.g. be implemented by heating the container surface with heating cables for holding temperatures of up to 250 °C. Transportable electrical heating equipment, including circulation pumps, are also available for holding temperature of up to 80 °C.
Request for a quoteKLÖPPER-THERM GMBH & CO. KG
Germany
Electrical heat tracing systems are used in all industrial sectors in order to heat up products in pipelines and vessels to maintain temperatures or to avoid freezing of the product. This type of heating offers several advantages It is highly flexible and adaptable to fulfil the specific customer requirements and ensures the effective and economic utilization of the input energy. Our customers appreciate the high accuracy of temperature control and the low maintenance costs. We offer harmonized components, engineering, delivery and installation from a single source.
Request for a quoteKLÖPPER-THERM GMBH & CO. KG
Germany
The compact steam superheaters of type series PVN reach high steam temperatures even at low process pressure. Due to the compact design and control concept, they are characterised by short response times, high control precision, and high availability (existing redundancies). In many cases, our steam superheaters are designed as a "stand alone" system and provided completely assembled with all necessary safety devices and controls. The customer must only provide the process connection and the electrical connection.
Request for a quoteKLÖPPER-THERM GMBH & CO. KG
Germany
The energy market called for technical solutions contributing to a mains stabilization and benefiting from the potential of favourable energy prices at the same time. The warm water boilers can be delivered in a power range from 35 kW up to 1.2 MW whereas the hot water boilers are available with a capacity of max. 10 MW. By means of parallel or series connection of several systems the power range can be extended optionally. The functional principle of warm and hot water boilers relies on the direct heating of flowing water via numerous resistance heating elements. For control purposes, they are summarized in groups which are either switched in steps or triggered infinitely variable via a thyristor power controller.
Request for a quoteKLÖPPER-THERM GMBH & CO. KG
Germany
Klöpper Therm electric flow boilers are used for generating hot water in heating units for direct heating, storage operation or for Power to Heat systems. As an alternative to other energy types in new buildings or when converting central heating units, these boilers offer a universal range of applications radiator heating, floor heating, mixed systems or bivalent operation with other energy types. Depending on the relevant operating conditions of the energy supplier, the boilers are used for direct or storage heating by utilising free electric power during off peak times.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
BLICKLE RÄDER+ROLLEN GMBH U. CO. KG
Germany
The SVS wheel series is primarily used for heavy duty applications requiring extremely high load capacities of up to 15,000 kg. They are typically used in machine and systems engineering. Their resistance to a wide range of aggressive substances also makes them suitable for use in applications which require resistance to chipping and oil. Despite their exceptional load capacities, only minimal effort is required on smooth surfaces to move transport units with SVS castors. The rugged grey cast iron series is extremely wear-resistant and is also capable of withstanding temperatures of between -25°C and 120°C.
Request for a quoteDEBANG EXPORT & IMPORT GMBH
Germany
Bio-Oil is a specialized skincare product that is formulated to improve the appearance of scars, stretch marks, uneven skin tone, aging skin, and dehydrated skin. It contains a unique blend of ingredients including vitamins A and E, calendula oil, lavender oil, rosemary oil, and chamomile oil. These ingredients work together to nourish and hydrate the skin, while also promoting cell regeneration and improving elasticity. Bio-Oil is lightweight and easily absorbed into the skin, leaving it feeling soft and smooth. It can be used on the face and body and is suitable for all skin types. Regular use of Bio-Oil can help to reduce the visibility of scars and stretch marks, even out skin tone, and improve overall skin texture.
Request for a quoteASP GERMANY
Germany
ASP’s "Forging – stamping" covers use fabrics coated on one or two sides (aramid based). This specific coating provides mechanical and thermal advantages that are needed for these processes (resistance to molten metal splashes, M1 fire protection class, high tear resistance, etc.). Covers that are tailor-made and repaired in our workshop provide the best protection for your robots.
Request for a quoteMASCHINENFABRIK BERTHOLD HERMLE AG
Germany
The C 400 is a dynamic machining centre offering perfect entry into 5-axis/5-side machining. The C 400 machining centre is based on HERMLE's proven core expertise in 5-axis technology. Powerful and dynamic - it reliably meets the demands of the market - precisely and convincingly. The mineral casting machine bed promotes stable, vibration-free machining. The C 400 features a large working area with a small installation area and can be ergonomically adapted to every machine operator - thus ensuring optimum ease of use. Numerous features ensure cost-effective production. The C 400 machining centre is intended for high performance, large-scale machining of workpieces to high accuracy and surface quality.
Request for a quoteJINTIAN COPPER
Germany
Main products: Brass valves, cast iron valves, gas valves, plumbing and sanitary ware, water meters and various types of pipe fittings and accessory products Applications: Water supply and drainage systems, gas systems, urban heating, HVAC and piping connections Honorary titles: High-tech Enterprise, Famous Chinese Valve Brand, Zhejiang Manufacturing Certification
Request for a quoteNITTO KOHKI EUROPE GMBH
Germany
The highspeed mighty mite with supperefficient silencer and rear exhaust system. Wonder works on all metals, wood, and plastics, even extremely hard and exotic materials. And now that efficiency is upgraded with the addition of an air silencer and new rear exhaust system for grinding dustit's all the more the perfect tool for toolrooms and model shops. The super efficiency of the silencer makes it possible for all craftsmen to work longer with less irritation due to noise. For precision grinding, deburring machines parts, grinding small castings, removing welding slags, shaping and finishing wood, glass and plastics. This is the compact, easy handing air tool for all tasks.
Request for a quoteNITTO KOHKI EUROPE GMBH
Germany
An asset in any industry...deslagging, desputtering welds, cleaning, castings, brick, stonework, and other materials. Jet Chisel is a prime pneumatic perfomer in each of these and other tough job areas. Maximum performance in a lightweight, minimumsize air tool, Jet Chisel delivers years of troublefree, efficient operation. And it's a tool that gets all the way down to the surface of matters. Quick, Jet Chisel needles adjust to any surface contour automatically. They get deep into corners, all the way into uneven surfaces, all types of curvatures making it a tool no shop should be without. It's an equally efficient timesaver in shipboard applications, too.
Request for a quoteSTARRAG GMBH
Germany
The compact single column vertical lathe (swing diameters of 1,400 to 2,800 mm) is appropriate not only for turning, but, with additional units, can also be used for drilling, milling and grinding. It means that it is possible, in a single clamping, to carry out a full machining operation on the CONTUMAT VCE and not simply turning. The rigid cast construction on this lathe ensures low vibration and accurate cutting; hydrostatic guide rails damp vibrations even further. The technical design and numerous fitting options mean that Dörries is able to configure an individual machine to every customer.
Request for a quoteSTARRAG GMBH
Germany
The vertical lathes of the TVU product line of Berthiez are especially suited for machining engine and turbine components, which are primarily used in the aerospace industry as well as for alternative and classical power generation. The TVU vertical lathes are characterized by a complete cast design, highprecision static and dynamic positioning as well as longlasting reliability. Advantages of the TVU vertical turning lathes are, completely cast iron construction, high static and dynamic axis stability, high accuracies and long term reliability. For higher flexibility the machine can be equipped with several pallet change systems and adaptable milling heads. The optional Yaxis table traverse will permit the turning, milling and grinding of complex components in a single clamping.
Request for a quoteResults for
Castings - Import exportNumber of results
65 ProductsCountries
Company type
Category