Can openers - Import export

• cutting knife principle • with cap lifter in the handle • hardened knife and transport wheel

• »no-sharp-edges-cutting-principle« • the lid is cut cleanly sideways underneath the rim • built-in tongs for taking off the lid easily

• small, compact, easy to store in the drawer • fine chrome-plating • transport wheel and knife from special, tempered steel

• for commercial use • designed for cans in catering size • cutting-knife-principle • knife and traction wheel specially hardened and tin-plated

• cast elements painted light-grey • reliable tool for professional users in food service • bar, knife and transport wheel from high grade stainless steel • maximum can height 550 mm • table base element: 230 x 80 mm • dimensions: bar with functional part - 840 mm long

• convenient attachment to the edge of the tin thanks to wide-opening pincers • the hardened cutting wheel is driven via two sprung toothed wheels and therefore optimally adjusts itself to the edge of the can

The Side-Pocket-Bag is a perfect solution for the packaging of greeting cards. The card can be opened so that the inside text and picture are visible. This bag is a must for pop-up cards. inside. 1st class raw material and a perfect finish for a proper presentation of your products. It is available in high transparent and high glossy OPP transparent and glossy CPP (= PPCast) sizes and thicknesses according to your specifications with or without printing with Green Point, barcode or your logo up to 10 colours in flexo or gravure printing

Do you need to protect sensitive equipment from extreme climate conditions? Or do you need to store goods without the risk of them getting detected? Our fast opening domes are designed to offer instant protection and shelter. Our domes are operated by an electric gearbox, and fitted with a manual safety system. This enables them to open extremely fast, in less than a minute. They can open in either single or dual mode (both ways). They are composed of a galvanized steel frame and a heavy-duty PVC-coated fabric cover. Our protective domes are available in standards diameters of 9, 11, 13, 16 and 20 meters. We can adapt their design to match local wind and snow load requirements, so your goods are always well protected.

Raised access floor power system 8508BK with 8 slots. The housing is made of sendzimir galvanized sheet steel. The insert lid and frame are made of 1.5 mm thick stainless steel. The lid is removable and can be covered with a 15 mm floor covering such as Stone, wood etc. The bottom of the receptacle box can be opened for subsequent pulling of cables without affecting the connected units. Further equipment variants on request

In small sewage treatment plants, investment costs play a decisive role. In stationary dewatering systems, for example, the construction of a new building can be significantly costly. You can avoid those costs with mobile container systems for sludge dewatering. Container-based solutions are a practical alternative to fixed dewatering installations.. A container is a true "plug and play" option – just connect it and start dewatering. ►Sludge dewatering in a one-man operation: comfort and personal safety, with control of the dewatering installation directly on-site. ►Year-round comfort: raised roof; insulated walls and roof, consistent use of stainless steel. ►Minimized maintenance effort: The roof can be opened by a single person using a manual hydraulic lifting system; the decanter can be opened with a crane built into the container. ►Optimized for operation in the smallest of spaces ►Easy transport with all current truck types

The miniature roller slides can be delivered either as open type or with end plates. The exterior part is made of aluminium, the interior part consists of hardened steel. With standard drilling pattern.

The miniature roller slides can be delivered either as open type or with end plates. The exterior part is made of aluminium, the interior part consists of hardened steel. With standard drilling pattern.

Raised access floor power system 9908AK with height-adjustable floor socket, 8 slots. The housing is made of sendzimir galvanized steel sheet, the frame and the lid for inserting from solid aluminum. The lid is anodized in natural aluminum and can be covered with carpet, etc. It closes even when the standard plug is inserted. The bottom of box can be opened for subsequent pulling of cables without affecting the connected units. Further assembly variants on request.

Raised access floor power system 9904AK with height-adjustable floor socket and 4 slots. The housing is made of sendzimir galvanized sheet steel, the frame and the insert lid are made of solid aluminum. The lid is anodized in natural aluminum and can be fitted with floor coverings. It closes even when the standard plug is inserted. The bottom of the receptacle box can be opened for subsequent pulling of cables without affecting the connected units. Further configuration variants on request.

Underfloor system 8912BK with height-adjustable floor socket, with 12 slots. The housing is made of sendzimir galvanized sheet steel, the swiveling cover and the frame are made of 1.5 mm thick stainless steel. Floor coverings such as carpets, parquet, laminate etc. with a thickness of 15 mm can be inserted in the removable cover. The cover also closes when standard plugs are inserted. The bottom of the box can be opened for subsequent pulling of cables without affecting the connected units. Further configuration variants on request.

Raised access floor power system 8512BK with 12 slots. The housing is made of sendzimir galvanized sheet steel. The insert lid and frame are made of 1.5 mm thick stainless steel. The lid is removable and can be covered with a 15 mm floor covering such as Stone, wood etc. The bottom of the receptacle box can be opened for subsequent pulling of cables without affecting the connected units. Further equipment variants on request.

The sample containers sterile are sterilised by irradiation and correspond to a sterility assurance level Sterile SAL 10-3 (according to ISO 11137) inside. The handy and universally applicable sample jar is easy to fill, smooth-walled and free of undercuts, therefore it can be emptied completely. It is an excellent universal container for all liquid and solid contents. The attached lid of the sample container can be opened with one hand and fixed at a 90° angle. This leaves the other hand free to take samples. Liquid/condensate in the lid runs into a collecting channel integrated in the lid, nothing is lost, nothing can drip off. The sample boxes are closed while hot during production. Due to this process, the sample boxes close absolutely tightly, as the lid and box adapt optimally during the cooling process. The sample container made of PP is highly transparent, the contents of the container can be easily recognised.

Bags with euroslots are ideal for lightweight contents. The packaging is open at the end of the bag, with a crosswise sealing underneath the euroslot header. Additionally, a flap with an adhesive stripe can be integrated, so the hanging bag can be opened and reclosed several times. We would be pleased to give you personal, competent and individual advice about which type of euroslot bag fits your requirements. Hanging bags with euroslot directly from the manufacturer - we look forward to your inquiry by mail or by phone: +49 (0)9181/2960-0!

A snap or retaining ring is a fastener or retaining ring that consists of a semi-flexible metal ring with open ends that can be snapped into place. It fits in a groove on a shaft or inside a bore and locates the shaft axially in one direction.

Circlips and Locking Rings consist of a semi-flexible metal ring with open ends that can be snapped into place. They fit in a groove on a shaft or inside a bore and locates the shaft axially in one direction.

Easy-Click closure - stop-it can be opened and closed in any position - without tiresome screwing on and off. High quality material - stop-it made from the heat resistant and chemical resistant plastic PVDF. The clamp is galvanised steel. The hose clip can be used wherever the flow in hoses with liquids or gases needs to be regulated or stopped. Stepless flow regulation: With the hose clip stop-it's knurled screw, a stepless, delicate flow regulation or complete stop of the flow are possible, even for existing hose connections. The hose is compressed over a wide area against the sturdy steel hook in order to prevent it from being damaged.

BEST POSSIBLE ERGONOMICS & EFFICIENCY OF MAINTENANCE: FOR OPERATORS No platform required for machine loading and operating area Pivotable main control panel with good visibility into the work area FOR MAINTENANCE & SERVICE Sliding doors on the back provide generous central maintenance access to the machine, doors in the setup room can be opened wide Central and easily accessible media supply, hydraulic unit and maintenance access for A and W axis through movable housing segment

The multilayer label, also known as a peel-off label or multilayer label, consists of two or three layers of labels on top of each other. This means that three pages are available for your information. You can achieve a five-sided information surface with three layers and double-sided printing of the label. Multilayer labels are resealable and can usually be opened using a glue-free flap. As a back label, they can be punched in almost any shape and even printed using thermal transfer printing.

The J1939 protocol stack offers the complete functionality for integration of the SAE J1939 standard into your devices. Versatile configuration options facilitate individual customization to a target product. Example codes facilitate the startup phase, enabling the user to focus on the implementation of their own application. The open CAN driver (CANpie) provides the flexibility to use any CAN controller available on the market. The bridge function to the CANopen Slave protocol stack facilitates realization of devices with multi protocol capability. In addition, less development time is needed for the implementation of parameters as these are addressed by all protocols in the same way.

aluCLIC is a highly modern electronic enclosure, designed for quick installation and rapid exchange. The snap lock located under the enclosure can be easily levered open and the enclosure changed in an instant. The lid already has a recess to accommodate membrane keypads or a front plates. The snap-on device for attaching the enclosure can be fastened to the wall, ceiling or the body of the machine. Practical, fast and neat to install.

The standard for simple installations and tight spaces PFLITSCH's PIK-Trunking is designed for routeing small numbers of cables. It is also ideal for use where the available installation space is scarce. It is therefore the practical alternative in these situations. With greater sheet thickness and creased side walls, PIK retains its shape under load very well. Your advantages: Strong construction in ten different cross sections Comprehensive edge protection Deburred longitudinal edges Covers with equipotential bonding Simple installation Unlike ducted systems, PIK Trunking systems can be opened over their whole length to allow cables to be simply laid in them or cable installations modified later. Its cover is easy to clip on and remains securely in place even on vertical trunking and under vibrations.

Smart cable routeing for individual cable layouts PFLITSCH has been setting the industry standard with its Industrial-Trunking. With 13 different cross sections from 50 mm x 50 mm to 600 mm x 150 mm, about 80 accessory fittings and cover variants, the system has a suitable solution for every situation. The trunking can be opened over its total length to allow preassembled cables to be placed or removed quickly and easily. Your advantages: Safe cable routeing for large cable volumes Different cover variants – including hinged Press-fitted, self-securing domed nuts for vibration resistance and proven equipotential bonding Comprehensive edge protection at the sheet edges, low-burr cut edges UL and VDE tested

The SHG pro is the device of choice if existing lasers are to be frequency doubled. Designed in TOPTICA’s pro technology, it unites highly stable performance and convenient operation. Mirror and crystal holders can be adjusted without opening the resonator cover. A wide range of non-linear crystals covers SHG wavelengths from 190 to 800 nm. TOPTICA offers competent support for adapting the unit to customer requirements.

The ALW is a comfortable, ergonomic, and compact seated workstation that offers plenty of legroom, and which can be adjusted to the height of the operator via the height-adjustable foot plate. The observation lens offers a variable viewing angle from 10° – 50°, thus ensuring comfortable working. The closed, laser-proof housing makes the ALW a laser-protected workplace that can be used in a normal production environment without additional safety precautions. The laser system is easy to operate. In addition to configuring via the display, the laser parameters can be adjusted via the patented multifunction footswitch or adapted accordingly during welding. The large doors of the ALW can be opened wide. This facilitates easy loading.