Building construction - Import export

HR-Structures' lightly thermally insulated industrial halls are equipped with Thermoplane roofing and sandwich panel wall cladding. This combination is the smartest solution for slightly temperature-insensitive goods. The areas of application of our lightly thermally insulated halls: - Storage for slightly temperature-sensitive goods - Protected parking and storage space - Assembly and order picking for all kinds of goods - Maintenance and servicing Roofing by means of Thermoplane is the best solution if no elaborate insulation measures are desired, but condensation and condensation water in the hall are to be avoided. It consists of two shells which are filled with air and thus provide additional insulation. Wall cladding made of sandwich elements is the best way to gain the maximum insulation.

Our uninsulated halls offer simple and inexpensive all-round protection for the storage of temperature-insensitive goods. They are ideally suited for storage, roofing of construction sites or for temporary assembly. The areas of application of our uninsulated halls: - Storage for temperature-insensitive goods - protected loading of transporters - protected parking and storage area - Picking for goods of all kinds - Maintenance and repair For your roof and wall covering you can choose between a PVC tarpaulin or a trapezoidal sheet. Made of highly tear-resistant, and durable industrial PVC, tarps are a cost-effective alternative compared to other cladding options.

Our thermally insulated halls are the highest quality solution and offer the best protection for sensitive goods. Thanks to all-round high insulation by means of sandwich elements, these lightweight halls can be used in all areas. The areas of application of our thermally insulated halls: - Storage for sensitive goods - protected parking and storage space - Assembly and commissioning for goods of all kinds - Maintenance and repair - Production and workshop - Sales and exhibition areas Benefit from the excellent heat-insulating and low-maintenance properties of full cladding made of sandwich elements. They consist of two outer shells made of steel and a foam core made of polyurethane or mineral wool, thus ensuring optimum insulation. This means that the energy required to heat the industrial hall can be significantly reduced. As a positive side effect, appropriate noise protection is generated at the same time.

To protect your goods from condensation or condensation water, it is possible to integrate a special underlay tarpaulin. It consists of mesh fabric, which allows moisture to diffuse from the inside of the hall to the outside. The fields of application of our condensation water protected halls: - Storage for temperature-insensitive goods - protected loading of transporters - protected parking and storage area - Picking for goods of all kinds - Maintenance and repair When single-layer tarpaulins in the roof are no longer sufficient, we at HR-Structures recommend our modern thermal tarpaulins. Produced in membrane technology, the two-layer roof and gable covering has a heat-insulating effect and prevents condensation on the underside of the roof tarpaulin. It consists of two shells, which are filled with air and thus provide additional insulation and protection against condensation. As wall cladding we recommend here the trapezoidal sheet.

HR-Structures canopies without wall cladding: The ideal solution to quickly create covered loading zones and storage areas. Our storage tents protect from direct sun, rain, hail or snow from above. The areas of application of our canopies: - Storage for weather-insensitive goods - Protected loading of transporters - Protected parking and storage area - Picking for all kinds of goods - Roofing of sports facilities The covering of your roofing can be freely chosen between a PVC tarpaulin or a trapezoidal sheet. Our highly tear-resistant PVC tarpaulin can be installed quickly and cost-effectively due to its low weight, while our trapezoidal sheets offer even better weather protection and the possibility of installing photovoltaic modules. Depending on your wishes and local conditions, your roofing can be anchored using ground nails or dowels to ensure maximum stability.

This measuring device is ideal for the fast determination of humidity rate in solid substances such as wood and building construction materials.

Pultruded glassfibre profiles, produced in accordance to the EuropeanStandard EN 13706 / E23 can be used for different applications for example in chemical industry, cooling towers, building, construction and infrastructure business as well as for maritime applications. Very often we build ladders, stairways, platforms and other acces structures from it. But with this profiles we can also solve some other solutions that you can find on our website.

Pultruded glassfibre profiles, produced in accordance to the EuropeanStandard EN 13706 / E23 can be used for different applications for example in chemical industry, cooling towers, building, construction and infrastructure business as well as for maritime applications. Very often we build ladders, stairways, platforms and other acces structures from it. But with this profiles we can also solve some other solutions that you can find on our website.

Pultruded glassfibre profiles, produced in accordance to the EuropeanStandard EN 13706 / E23 can be used for different applications for example in chemical industry, cooling towers, building, construction and infrastructure business as well as for maritime applications. Very often we build ladders, stairways, platforms and other acces structures from it. But with this profiles we can also solve some other solutions that you can find on our website.

Pultruded glassfibre profiles, produced in accordance to the EuropeanStandard EN 13706 / E23 can be used for different applications for example in chemical industry, cooling towers, building, construction and infrastructure business as well as for maritime applications. Very often we build ladders, stairways, platforms and other acces structures from it. But with this profiles we can also solve some other solutions that you can find on our website.

Pultruded glassfibre profiles, produced in accordance to the EuropeanStandard EN 13706 / E23 can be used for different applications for example in chemical industry, cooling towers, building, construction and infrastructure business as well as for maritime applications. Very often we build ladders, stairways, platforms and other acces structures from it. But with this profiles we can also solve some other solutions that you can find on our website.

Pultruded glassfibre profiles, produced in accordance to the EuropeanStandard EN 13706 / E23 can be used for different applications for example in chemical industry, cooling towers, building, construction and infrastructure business as well as for maritime applications. Very often we build ladders, stairways, platforms and other acces structures from it. But with this profiles we can also solve some other solutions that you can find on our website.

Pultruded glassfibre profiles, produced in accordance to the EuropeanStandard EN 13706 / E23 can be used for different applications for example in chemical industry, cooling towers, building, construction and infrastructure business as well as for maritime applications. Very often we build ladders, stairways, platforms and other acces structures from it. But with this profiles we can also solve some other solutions that you can find on our website.

Pultruded glassfibre profiles, produced in accordance to the EuropeanStandard EN 13706 / E23 can be used for different applications for example in chemical industry, cooling towers, building, construction and infrastructure business as well as for maritime applications. Very often we build ladders, stairways, platforms and other acces structures from it. But with this profiles we can also solve some other solutions that you can find on our website.

Novelis products are renowned for their use in building and construction, but our aluminum also can help ensure the efficiency of buildings and maintain the comfort of those inside. Novelis aluminum is flexible but strong, stylish but practical – characteristics that make it ideal for construction of roller shutters, sunbreakers and windows. Exposed to the harshest conditions, our pre-painted rolled aluminum can withstand mother nature’s worst yet retain its ease of use and like-new aesthetics for years to come. Novelis SP80 is the name of a particularly abrasion-resistant paint system for roller shutter slats based on polyamide-treated premium polyurethane.

The light weight and pliability of aluminum make it easy to work with and can streamline installation. In addition to the weight advantage and ductility, aluminum provides a complete barrier to light, moisture and magnetic waves. Impermeable to all gases including oxygen, aluminum also provides superior fireproofing capabilities for both industrial and residential construction. Aluminum insulation offers good noise reduction properties along with resistance to corrosion and heat. Not only does this improve interior environments, it also increases product life and efficiency. These proven characteristics continue to make aluminum the leader in insulation and the preferred choice for all types of building and construction.

Touching-up damaged points on galvanised surfaces, for example after welding, drilling or cutting processes Priming of ferrous metals when zinc galvanising cannot be carried out. For example, in vehicle and ship repairs, in steel building construction, civil engineering and bridge building, in tank and overhead line construction, on grids, fence and traffic signal posts, exhaust systems, drain gutters Also suitable for spot welding thanks to the good electrical conductivity Advantages and benefits Highly effective due to active, cathodic corrosion protection Versatile use as durable corrosion protection at thermally stressed metal parts Highly economical due to low consumption and self-cleaning spray valve Supplements galvanising and forms a rough adhesive surface for subsequent painting

Elegant high-end multi-touch table on brushed stainless steel feet with Corian® framing and integrated Silent-PC, optional object recognition based on P-Cap with up to 80 touchpoints.

Minneapolis BlowerDoor is a modular measuring system for airtightness. With its measuring range from 19 m³/h to 7,200 m³/h and the possibility to combine several BlowerDoor systems (MultipleFan), there are no limits to its use in Passive Houses, in newly constructed buildings, and in existing buildings and apartment buildings, as well as in industrial and administrative buildings. With the innovative DG-1000 high precision pressure gauge and the new TECTITE Express 5.1 software you can conduct highly accurate automated, semi-automated and manual BlowerDoor tests in accordance with ISO 9972 and the European Standard EN 13829.

For your project, we can provide you with the required accessories to assist in constructing your building. Flashings for walls come as U-profiles, external and internal corners as well as drip-trays on request. For roofs, we can offer the following: wall-connection plates and barge, verge ridge and eaves flashings. These flashings can be offered in various sizes and lengths. Usually, the flashings are manufactured in galvanised steel in a coated paint finish. On request, we can manufacture these accessories in aluminium or stainless steel. The strength of material is also freely available to choose from, and can be finished in a range of RAL-colour tones.

For your project, we can provide you with the required accessories to assist in constructing your building. Flashings for walls come as U-profiles, external and internal corners as well as drip-trays on request. For roofs, we can offer the following: wall-connection plates and barge, verge ridge and eaves flashings. These flashings can be offered in various sizes and lengths. Usually, the flashings are manufactured in galvanised steel in a coated paint finish. On request, we can manufacture these accessories in aluminium or stainless steel. The strength of material is also freely available to choose from, and can be finished in a range of RAL-colour tones.

For your project, we can provide you with the required accessories to assist in constructing your building. Flashings for walls come as U-profiles, external and internal corners as well as drip-trays on request. For roofs, we can offer the following: wall-connection plates and barge, verge ridge and eaves flashings. These flashings can be offered in various sizes and lengths. Usually, the flashings are manufactured in galvanised steel in a coated paint finish. On request, we can manufacture these accessories in aluminium or stainless steel. The strength of material is also freely available to choose from, and can be finished in a range of RAL-colour tones.

For your project, we can provide you with the required accessories to assist in constructing your building. Flashings for walls come as U-profiles, external and internal corners as well as drip-trays on request. For roofs, we can offer the following: wall-connection plates and barge, verge ridge and eaves flashings. These flashings can be offered in various sizes and lengths. Usually, the flashings are manufactured in galvanised steel in a coated paint finish. On request, we can manufacture these accessories in aluminium or stainless steel. The strength of material is also freely available to choose from, and can be finished in a range of RAL-colour tones.

For your project, we can provide you with the required accessories to assist in constructing your building. Flashings for walls come as U-profiles, external and internal corners as well as drip-trays on request. For roofs, we can offer the following: wall-connection plates and barge, verge ridge and eaves flashings. These flashings can be offered in various sizes and lengths. Usually, the flashings are manufactured in galvanised steel in a coated paint finish. On request, we can manufacture these accessories in aluminium or stainless steel. The strength of material is also freely available to choose from, and can be finished in a range of RAL-colour tones.

For your project, we can provide you with the required accessories to assist in constructing your building. Flashings for walls come as U-profiles, external and internal corners as well as drip-trays on request. For roofs, we can offer the following: wall-connection plates and barge, verge ridge and eaves flashings. These flashings can be offered in various sizes and lengths. Usually, the flashings are manufactured in galvanised steel in a coated paint finish. On request, we can manufacture these accessories in aluminium or stainless steel. The strength of material is also freely available to choose from, and can be finished in a range of RAL-colour tones.

Fire-resistant composite sandwich core panel on basalt and ceramic basis for the production of fire-resistant constructions and refractory building structures in the field of building construction and container construction, as well as comparable applications ✓ 100% natural and chemical neutral ✓ antibacterial ✓ corrosion-resistant ✓ thermoresistant ✓ pressure-resistant ✓ water-repellent ✓ reducevibration ✓ fire-resistant ✓ nonflammable ✓ recyclable

Fireproofing composite sandwich core panel on basalt and ceramic basis for the production of fire-resistant constructions and refractory building structures in the field of building construction and container construction, as well as comparable applications ✓ 100% natural and chemical neutral ✓ antibacterial ✓ corrosion-resistant ✓ thermoresistant ✓ pressure-resistant ✓ water-repellent ✓ reducevibration ✓ fire-resistant ✓ nonflammable ✓ recyclable

Composite sandwich panel on basalt and ceramic basis for the production of fire-resistant building constructions. CBG-SeaPan-OEM-50/60 offers completely new solutions for heat, sound and fire protection application. The use of lightweight composite materials makes it possible to reduce the total weight of a construction considerably. - 100% of natural origin, chemically neutral — corrosion resistant — non-flammable — non-combustible — resistant to humidity — antibacterial — recyclable — no smouldering — dimensionally stable

Head for formwork prop: can be fitted on top of formwork props to hold the wood formwork support for which 4 corner angles are welded Tripod stand: the formwork prop can be fixed simply by a bracket that is supported movably on the tripod stand Formwork clamp: large size for stepless fixing by wedge. Eccentric clamp: for tensioning wire from 5 mm - 10 mm, load up to 2.500 kg Formwork clamp: made of 8 mm thick bent flat-bar steel. Wing nut WOF 27, casting, preferred use for grid-pattern formwork etc.