Bracket - Import export

Bracket

The universal brackets for shaft alignment Stored premounted in the case for instant usage Mounts on machine shaft in less than a minute Standard chains fit shaft and coupling diameters of approx. 15 mm to 200 mm / 5/8“ to 7 7/8“ This universal bracket set contains all parts needed for quick, stable mounting of the measurement components. It fits onto any shaft or coupling approx. 15 mm to 200 mm /5/8" to 7 7/8“ in diameter. Stored premounted in the case, the brackets are always ready to use and quickly in place. The chain may be used as a plumb bob to accurately determine the dimension from coupling center to front foot.

These products are the accessories for large products, which made by stainless steel.

This part is use for printer accessories,after CNC Milling,processing black anodize.

This is the parts use in priter accessories, main suopprt bracket.

These are the parts of electric bicycle stand, mainly machine by CNC milling machine, then process natural anodize.

Printer accessories.

For fixing of piping and pipe components Fast and easy installation We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

Gutter support, semi - circular and box section, dimensions 200 mm / 25x4 up to 400 mm / 30x5 3.6" / 0.98x0.16" up to 7.6" / 1.18"x0.2" Available surfaces: Zinc plated Copper We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

Application: Wire clamp bracket will provide optimum strain relief. Construction allows a large difference in maximum and minimum wire diameter. Construction: • Silicone cover with retention ring prevent disconnection due to vibration. Tapered entrance hole to ensure proper sealing on most cable diameters.

A fuel injection systems manufacturer used two steel brackets to clamp the fuel rail to the top of the engine. The customer was looking at changing these brackets to plastic to reduce costs. In order to prevent deformation of the plastic bracket during the tightening of the bolt, a Compression Limiter was required. The customer originally investigated the use of a machined Compression Limiter, but the savings from changing the metal bracket to plastic would have been lost considering the high price of the machined Limiter. The customer approached SPIROL to help provide a lower cost solution for the Compression Limiter. SPIROL recommended the use of a standard CL200 Compression Limiter based on the rated proof load of the bolt used in the assembly. This roll-formed Compression Limiter is a fraction of the cost of a machined Compression Limiter. In addition, the flexibility of the roll formed Limiter enabled the customer to widen their hole tolerances further reducing assembly costs.

We employ welding robots to join complex metal wire parts made of steel or aluminium to form an assembly. This in turn leads to complex bent wire components for the automotive industry, such as brackets for cushioning frames, and eyelet fastenings.

Processes such as radial riveting or pressing are used to permanently conjoin a metal plate for example with a wire bracket. 
Test apparatus for monitoring compliance with the required tear values secure the process in line with these safety-relevant components. These assembly parts are used, for example, as reinforcements for backrest frames.

Double riveted Strong side threads Eyebolt cannot be lost Pre - mounted rosette at the nail to cover the insertion point Length of nails 140, 200, 250 and 300 mm For round and square downspout pipes Available surfaces: Hot dip galvanized Galvanized and powder - coated Solid copper Titanium - Zinc We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

GRP designs meet requirements for high mechanical stability and are also resistant to many chemicals and corrosion. They do not conduct electricity and are easy to assemble. We are always delighted to work on special projects for our customers. The task here was to design a special GRP crane platform with a stainless steel crane unit. This was developed and built by TC and is used to raise battery packs by approx. 1 m. The complete crane platform can be rolled manually to the respective place of use.

Shock dampening for low operating noise levels Sturdy, warpresistant design with heavy doublepost guides With adjustable blade clearance for a most precise cut at any thickness Very precise blades made of special steel High operating safety through material guide at entrance and protective cover Springactuated hold down clamp (from 250 mm stock width) Top/bottom dead center control to monitor blade position Counter control Mounting bracket

Shock dampening for low operating noise levels Sturdy, warpresistant design with heavy doublepost guides With adjustable blade clearance for a most precise cut at any thickness Very precise blades made of special steel High operating safety through material guide at entrance and protective cover Springactuated hold down clamp (from 250 mm stock width) Top/bottom dead center control to monitor blade position Counter control Mounting bracket

Universal stainless steel exhaust system accessories. Everything you need to build your own exhaust system. Holder or lambda probe thread up to the exhaust spring, which are used for slip on exhaust systems.

Easy installation through wide opening Suitable for many types of standpipes Eyebolt cannot be lost Boss M10 Available surfaces: Zinc plated Copper We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

Easy installation through wide opening Suitable for many types of standpipes Forged steel nail, length 120 mm and 200 mm Available surfaces: Zinc plated Copper We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

Double riveted Strong side threads Eyebolt cannot be lost Hammer - in screw including PE - plug 12 x 65 mm Available surfaces: in lengths of 140 mm and 200 mm Hot dip galvanized Solid copper Stainless Steel (1.4301) We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

Riveted nut Strong side threads Eyebolt cannot be lost Boss M10 For round and square downspout pipes Available surfaces: Hot dip galvanized, nut zinc plated Solid copper, nut zinc plated and yellow chromatted Solid titanium - zinc, nut zinc plated Stainless Steel AISI 304 (1.4301) We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

U-bracket with hole

euro-bracket

shock dampening for low operating noise levels thanks to a heavy overall frame and the sturdy, warpresistant design with heavy doublepost guides even toughest materials can be cut smoothly with adjustable blade clearance for a most precise cut at any thickness very precise blades made of special steel high operating safety through material guide at entrance and protective cover springactuated hold down clamp (from 250 mm stock width) top/bottom dead center control to monitor blade position counter control mounting bracket hydraulic power units in different sizes electrical control

U-bracket M8

U-bracket M10

direct mounting to our Gripper Feeds, series ZVTMB or similar products with mounting bracket very costeffective flattening of the coil set best results through adjustment of both top straightening rolls rolls made of special steel and hardened and ground

Use: Installation clamp for ceramic jack, high-temperature Jack or miniature jack for panel installation. . Mechanical design: • All parts, including the screws, are made of stainless steel. Order no.: • A-20.210 Clamp for ceramic jack. • A-20.307 Clamp for high-temperature jack.