Blades for sawing machines - Import export

Engineered for : • Stainless steel • All-purpose use for steels and non-ferrous metals • Tensile strengths of up to 1400 N/mm2 • Thick walled structurals

Our narrow bandsaw blades are produced in coils and ready for use. Here, we use the most common tooth form in the wood industry NV. We sell the narrow bandsaw blades as: toothed, toothed and set, toothed, set and sharpened. We offer the following pitches: 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 12 mm Below you can find the standard and semi-standard production program. (We can also produce other sizes. In this case, please contact us directly.) Standard (mm) Semistandard (mm) 10 x 0,6 10 x 0,4 | 10 x 0,5 10 x 0,6 12 x 0,4 | 12 x 0,5 15 x 0,6 15 x 0,4 | 15 x 0,5 | 15 x 0,7 20 x 0,7 20 x 0,4 | 20 x 0,5 | 20 x 0,6 25 x 0,7 25 x 0,4 | 25 x 0,5 | 25 x 0,6 | 25 x 0,8 30 x 0,7 30 x 0,6 | 30 x 0,8 35 x 0,8 – 40 x 0,8 –

Our bandsaw blades for mobile sawmills are available as coils and ready for use. We can supply the standard teeth W2-22 mm and W1-22mm. On request we can also provide the tooth W-19 mm and W-25 mm. We sell these bandsaws as: - toothed, - toothed, set and sharpened, - toothed, set, sharpened and hardened.

Production of bandsaw blades between 50 mm and 311 mm width. Available in the following styles: - toothed - welded - straightened and tensioned - swaged - set - stellite tipped Steel Qualities: - CR-100 swedish - CR-200 extra - CR-300 special - CR-400 PREMIUM - CR-400 Xtreme Coils: Available in both coils (10mm - 311mm) or finished saws (50mm - 311mm), bandsaw blades can be produced as single-sided or double-sided. Blades are also available with variable pitched teeth or with winter teeth.

AVOLA Circular saw blade HM/A/PH for cutting polystyrene and wood Special benefits of our patented development: One saw blade for two materials For polystyrene (Styrodur and styrofoam) and wood No jamming and sticking, because the newly developed openings in the master blade ensure sufficient air cooling Even without blade replacement More safety and occupational protection Faster, more effective and environmentally friendly operation

The high noise level at a construction site can damage the health of construction workers and others. Residents near a building site are often suffer for weeks and months due to noise emissions. Since in most cases it is not possible to protect the whole work area of the building site against noise emissions, it must be attempted to make the individual construction machines and devices less noisy. For equipping circular building site saws, AVOLA has developed a special blade-type HM/A/SG = carbide tipping/wolf tooth/silenced. This saw blade has eight serpentine laser incisions in the master blade 8 that reduce drumming of the master blade. At the same time, these laser incisions are distributed in such a way that the master blade still retains the pretension that is needed for the stability of the saw blade when idling and cutting.

Standard equipmentwith tilting alu sliding table 1000x800 mm Cutting height 424 mm Cutting length 700 mm Roller diameter 500 mm Saw band length 3720 mm a) for three-phase current 400 V, 50 Hz, motor power 1,3 KW b) or alternating 230 V, 50 Hz, motor power 1,3 KW only saw band, to be selected according to the type of stone material with jack rings and 2 rollers Sound emission Lpa according to DIN 45635, part 1651 on gas concrete and lightweight refractory bricks ...75 dB(A) on Poroton ...................................... 88 dB(A) Size LxWxH: 1000x1000x1800 mm Weight: 130 kg

As a market leader for circular building site saws and with more than 80 years of experience, we know what is important. With this knowledge, we work continually to keep products up to date, thereby offering the highest-quality, most durable and safest machines.Changes in the machinery directive For improved safety, we have developed a safety hood that has proven to significantly reduce occupational accidents as part of the revision of standard EN 1870-19 prior to the amendment of the Machinery Directive 2006/42/EC. This was awarded the EURO Test Prize of the EU Builder's Trade Associations. Since the new machinery directive went into effect in 2010, all new circular building site saws have been equipped with the newly improved safety hood and other essential safety components and have been delivered exclusively in this version.

Avola building site table saw ZBV 500 S with height and tilt adjustment and safety guard. The new ZBV 500-S is a height and tilt adjustable building site circular saw with a 500 mm saw blade. The ZBV 500-S also enables bevel cuts with a high cutting height on the construction site. Above all, the increasingly used insulating material can be optimally processed in connection with the AVOLA special circular saw blade HM / A / PH (see above).

REVOLVING CROSS CUT SAW WITH NC PROGRAMMING SYSTEM GAMA 65 K3 Fully automatic circular saw for positioning and controlling via touchscreen with length measuring system EXENSO COMFORT (Pusher system) Application Length stop system (pusher operation), revolving table and sawblade inclination via servo - motor for positioning ( cross cut, mitre cut or compound mitre cut) of heavy workpieces, i.e. carpenter industry, gluelam industry, log house industry, wooden frame work, solid wood, etc. Technical Equipment : - Motor rating 8,1 kW / 400 Vac-50Hz, star / delta start, direct driven - Motor speed 3.000 rpm - Electrical sawblade inclination 90-30° via servo motor - Laser light for cross cutting - Sawblade height at 90° / 245 mm – 45° / 164 mm – 30° / 113 mm - TCT – sawblade 650 x 30 x T 54 - Dust extraction spigot 125 / 80 mm - Revolving table 20° - 160° - Horizontal material clamping system, right - left - pneumatische Kappvorrichtung über ZweihandSteuerung/vollautomatisch

The universal band saw blade for all construction and insulation materials of small and large dimensions running on brick band saw machines. The new variable tooth pitch ensures notably low-vibration and quiet sawing processes and assures supreme quietness. The results are clean and smooth cuts of the best quality. Thanks to its long blade life and increased durability, our further developed, precision-ground tooth geometry is particularly convincing in hard building materials: • particularly low vibration and quiet • long blade life in especially precise and smooth cuts The specialist for: • Pore or lightweight concrete • Perforated brick • Porous bricks ("Poroton") • Insulation material

Engineered for : • Stainless steel • Heat resistant steels • Cold and hot working steels • Hardened steel up to 1900 N/mm2 • Nickel based alloys • Aluminium-silicon alloys • Copper-nickel alloys • Titanium and titanium alloys • Exotic, hard to cut alloys

Engineered for : • Induction hardened piston rods • Steels hardened up to 62 HRC • Hard chromium plated materials • Manganiferrous alloyed steels

Engineered for : • Aluminium alloys • Aluminium bronzes • Copper alloys • Sand cast aluminium and cast magnesium • Graphite

Engineered for : • Titanium alloys • Metals with high residual stress • Stainless steels • Special alloys • Abrasive non-ferrous metals and graphite

Engineered for : • Steels of the highest tensile strength • Long chipping materials • Stainless steel • Titanium based alloys • Nickel based alloys • Special bronzes

Engineered for : • hard and tough materials up to 1700 N/mm2 tensile strength • Stainless steel • heat resistant duplex steel • nickel based alloys • aluminium alloys • titanium bades alloys

Engineered for : • Pure aluminium and aluminium alloys • Solid material and structurals

Engineered for : • Small workshop bandsaws • Common steel qualities and non ferrous metals • Cross sections over approx. 100 mm (4”)

Engineered for : • Large cross-section steel beams • Structurals with residual stress

Engineered for : • Pure aluminium and aluminium alloys • Solid material and structurals • Materials with residual stress and a tendency to become pinched

Engineered for : • Common steel qualities and non ferrous metals • Short-chipping materials • Small structurals with thin walls • Narrow cross sections up to approx. 100 mm (4”) • Contour cutting operations

For sawing processes using minimal lubrication. Powerful at high cutting speeds and feeds. Engineered for : • Steel beams, profiles and tubes • Mixed cross-sections

Engineered for : • Steel beams, profiles and tubes • Mixed cross-sections

Engineered for : • Production band saw machines • All-purpose use for steels and non-ferrous metals • Tensile strengths of up to 1400 N/mm2 • Thick walled structurals

Engineered for : • Structurals with light or medium walls • Short chipping materials • Sheet metal on vertical band saw machines

With our saws and profile processing centers, we are able to precisely cut sheet metal and profiles on request. Elumatec DG244 double miter saw for lengths of up to 6000 mm, high-quality cutting of profiles made of aluminium, PVC and light metal alloys. Cutting profiles made of aluminium, PVC and non-ferrous metals with our SBZ-151 5-axis profile machining center from Elumatec.