Battery chargers - Import export

Decisive for the effective use of your accumulator is the choice of the right charger.

Car Support with Charging Cable for Gas Pens Complete with connection cable and charge monitoring and operating display

•No. Of Cells: 2-6 •Output voltage: 7.2 V •color: black •Spec.0 cover sheet FW-Type: FW7290/MH2-6 •Current: 3000 mA •Input voltage: 100-240 V •Input tolerance: ±10% •Protection Class: II •Input current: 0.2-0.4 mA •Unit: PP-C •AC Input: FRIWO interchangeable mains plug system: see Primary Adapters •MTBF: 200.000h acc. Mil217F (based on calculations at 120Vac/60Hz & 230Vac/50Hz, ambient 25°C and 100% load) (The MTBF are theoretically determined values, which does not guarantee the lifetime of the product or of the electrolytic ) h •Storage temperature : -40°C - 70°C •Working temperature: 0°C - 40°C •Humidity: 5% to 95% •DC output: Lead with texas plug 3 pin •Output voltage tolerance: +10% / -10% •Frequency: 50 / 60 Hz •Chemistry: NiCd/NiMH

Chargers for Lithium- Ion systems. All products conform to IEC 60335. Additional information Input voltage: 100-240 V Frequency: 50-60 Hz leakage current: ≤100 µA Reverse current: 50 µA Output voltage tolerance: ±1 Start-up-time: ≤5 sec. Standby losses: ≤0,5 87,5% Efficiency (typ. full load): ≥80% MTBF: 200000 Working temperature: 0-40°C Humidity: 10-85% Storage temperature : -20-70°C Operating Altitude: 2000 m Input current: 1850-870 mA Standard: EN61558-1, EN61558-2-6, EN60335-1, EN60335-2-29 Protection Class: II Dimension: 179x86x50,5 mm Weight: 507 g AC Input: 2 pole, IEC60320-C8 DC output: 3 pole, JST plug color: black Spec.0 cover sheet FW-Type: FW8100M/07/4.2/3.0 Chemistry: Li-Ion

As a system provider of charging and storage technology, we are presenting our inductive fast charging system etaLINK 12000 for the first time on these pages. The solution enables in-process charging of the lithium-ion batteries of driverless transport systems (AGVs / AGVs), industrial trucks (FFZ) and mobile robots. Loading processes can be flexibly integrated into the intralogistic processes. The scalable energy solution is the world’s first contactless battery charging system with an output of 12 kW and an efficiency of 93%. The result is fully automated charging processes and vehicle availability increased by up to 30%.

The contactless charging solution for AGV’s, robots and forklifts in industrial environments. Simply stopping your vehicle at the charging position will start your charging process. Thanks to the contact free design, the system may be installed whereever your process requires. There are no trip hazards and charging will start within less than a second. For optimized charging of Lithium batteries a CAN-interface to communicate with your vehicle components is part of the system.

AC White Label Wallbox \ MID variant 22kW with attached cable 4.5m / 7m. The intelligent AC White Label Wallbox is fully connected and has ISO15118 fully implemented. Further features: Smart charging functions (ISO 15118, PV load self-consumption charging, billing according to tariff plans, Grid-serving charging via SMGW / Cloud). Remote management (web app, mobile app, OCPP 1.6, OCPP 2.0.1, EEBUS) Integrated HEMS functionality (Energy Meter Readout, MODBUS/TCP, Local Load Management) Integrated safety function with DC RCD 6mA OTA SW-updates Authorisation (Plug 'n Charge via ISO15118, Autocharge, RFID) Ethernet / WLAN Human Machine Interface (HMI).

AC White Label Wallbox \ Basic variant 22kW with attached cable 4.5m / 7m. The intelligent AC White Label Wallbox is fully connected and has ISO15118 fully implemented. Further features: Smart charging functions (ISO 15118, PV load self-consumption charging, billing according to tariff plans, Grid-serving charging via SMGW / Cloud). Remote management (web app, mobile app, OCPP 1.6, OCPP 2.0.1, EEBUS) Integrated HEMS functionality (Energy Meter Readout, MODBUS/TCP, Local Load Management) Integrated safety function with DC RCD 6mA OTA SW-updates Authorisation (Plug 'n Charge via ISO15118, Autocharge, RFID) Ethernet / WLAN Human Machine Interface (HMI).

AC White Label Wallbox \ ERK variant 22kW with Socket Outlet. The intelligent AC White Label Wallbox is fully connected and has ISO15118 fully implemented. Further features: Smart charging functions (ISO 15118, PV load self-consumption charging, billing according to tariff plans, Grid-serving charging via SMGW / Cloud). Remote management (web app, mobile app, OCPP 1.6, OCPP 2.0.1, EEBUS) Integrated HEMS functionality (Energy Meter Readout, MODBUS/TCP, Local Load Management) Integrated safety function with DC RCD 6mA OTA SW-updates Authorisation (Plug 'n Charge via ISO15118, Autocharge, RFID) Ethernet / WLAN Human Machine Interface (HMI).

Transportable, hose pump for liquids, independent of mains power. Ideal for sampling from barrels, tanks, wells, water separators and sewage and purification systems. Vampire is packed in a handy transport case with: drive unit, two rechargeable batteries, battery charger, LED lamp, bottle holder, bottle LDPE 250 ml, hose pump and 5 m hose made of PE.

Planning a new development or a redesign of a rechargeable battery or charger? ANSMANN – Your partner from the initial idea through the planning, design, development and manufacturing stages and on to serial manufacturing. Based on your application and the requirements, we can guide you with professional advice for the selection of the correct cells, the capabilities of the necessary protective circuitry, compliance with standards and certification (as early as in the development phase), the first prototypes as STL parts and the first measurements. We can support you through all of the important steps towards your final decision. We can take on the design and manufacturing of the housing parts and the injection and stamping tools required for this. Single-source delivery and manufacturing guarantees optimum interaction between rechargeable battery, BMS and charger. The cells that we use are delivered by renowned manufacturers such as Panasonic, LG, Samsung, Sanyo, A123, Sony, etc.

Quality accessories that guarantee a long lifecycle for your battery systems Because of where they are used, rail vehicle batteries present particular challenges for the accessories maintaining the batteries. . That is why at GW Batteries we have developed a special technology which considerably simplifies the upkeep and maintenance of these special batteries. Our accessories for rail vehicle batteries Special chargers for use in railway workshops enable mobile use of the batteries in impassable terrain Stationary charging technology Battery monitoring systems with optional state information via GPS Water refill wagon for impassable terrain to refill distilled water Temperature sensor and other spare parts

The Pump Set B2 Battery is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. The set is supplied without battery and charger * Replaceable, powerful battery with Li-Ion * Battery life approx. 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70 * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

BPE-055-D18V - battery hydraulic crimping tool, 55 kN, CU185mm² for exchangeable dies series "60-H", "5" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPE-130-D18V - battery hydraulic crimping tool, 130 kN, CU300mm² for exchangeable dies series "130-C", "22" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

trak | powerpack lion is a highly efficient, modular lithium-ion traction battery system consisting of a lithium-ion battery, an HF charger and an integrated battery management system. This lithium-ion battery system is a universal retrofit solution. The traction battery system can be installed in industrial trucks originally designed for lead-acid batteries. Thanks to the HOPPECKE trough system, no vehicle-specific adaptations are required. In addition, several models with different capacities are available. trak | powerpack lion is particularly suitable for 24/7 operation. HOPPECKE has all the relevant technologies for industrial truck drives in its portfolio and provides its customers with comprehensive advice. The focus is on the total cost of ownership (TCO) and the return on investment (ROI) for the respective requirement.

The trak | uplift air battery is a lead acid battery for use in industrial trucks. The battery is equipped with the high-quality trak | air electrolyte circulation system, which shortens charging time while increasing battery availability. In addition, the energy requirement is reduced, and the water requirement is reduced by up to 65%. Reduced overcharging with trak | uplift air also increases cycle life. Especially in combination with our HOPPECKE HF chargers, the battery is charged gently and efficiently. Due to the possibilities of fast and intermediate charging, even demanding 24/5 shift operations are possible with trak | air.

BPP-1302-D18V - battery hydraulic crimping tool, 130 kN, CU400mm² for exchangeable dies series "130-C", "13" Two stroke hydraulic system for fast forward Opening jaw: 32 mm Battery: 18V/5Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPP-1301-D18V - battery hydraulic crimping tool, 130 kN, CU300mm² for exchangeable dies series "130-C", "13" Two stroke hydraulic system for fast forward Opening jaw: 26 mm Battery: 18V/5Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPL-062-D18V - battery hydraulic crimping tool, 62 kN, CU300mm² for exchangeable dies series "60-CK", "22" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPE-062-D18V - battery hydraulic crimping tool, 62 kN, CU300mm² for exchangeable dies series "60-CK", "22" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPL-055-D18V - battery hydraulic crimping tool, 55 kN, CU185mm²1 for exchangeable dies series "60-H", "5" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPL-035-D18V - battery hydraulic crimping tool, 35 kN, CU150mm²1 for exchangeable dies series "35", "4" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPE-035-D18V - battery hydraulic crimping tool, 35 kN, CU150mm² for exchangeable dies series "35", "4" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

The B2 Battery drum pump is suitable for low-viscosity, aqueous to slightly viscous media, such as plasticisers, cold cleaners and lubricants. The set is suitable for dispensing small containers such as canisters or hobbocks. The pump is flexible at all times and thus conserves important resources. The set is supplied without battery and charger. * Replaceable, powerful rechargeable battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge empties approx. 12 x 200 litre containers Features & benefits * BLDC motor with high efficiency up to 70% * Infinitely variable * Long battery life * Automatic switch-off in case of overload * Sophisticated quick-release fastener * The max. flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20° C. The measurement is taken at the pump's discharge nozzle, without hose, nozzle or flow meter.

With the very simple operation and the generated and saved measurement protocol, the documentation can be created quickly and completely reproduced. It is possible to save the measurement data in the device and to print it out again later. No tracer gas nor a second measuring device are required for use. The internal battery, the 230V charger or the 12V vehicle voltage can be used for the energy supply. All included in a complete set. Ethane is always contained in natural gas; evidence of this gas is also evidence of natural gas. A lengthy gas analysis is normally required to prove beyond any doubt that the measured gas concentration is actually natural gas and not swamp gas. This, also due to the sampling, a difficult and time- consuming process, is completely eliminated. Measurement and sampling directly at the borehole is easily possible. The printout can take place after the measurement.

Tube squaring machines are necessary to achieve burr-free and right-angled seam preparation for orbital welding. That‘s why Orbitec offers two machines, from the small handy Planfix 40 S to the large Planfix 115 S. The Planfix 40 S is a powerful and handy squaring device for mobile or stationary use with battery or mains drive. It has a large viewing window, a tool carrier for mounting the inserts, double-sided indexable inserts, and a feed with 0.1mm scale graduation. Alternatively, existing Orbitec facing tool bits can be used without tool carriers. The new inserts have a long service life and can process unalloyed, low-alloy and high-alloy steel quickly and reliably with high precision. Package includes exemplary for Planfix 40 S battery pack 230 V: — Tube clamping attachment — Drive — 2 Li-ion batteries — Battery charger — Tool set — Carrying case

713X \ 726X \ 745X – WITH ELECTRONICALLY CONTROLLED DRIVE & CONTROL VIA JOYSTICK – LITHIUM BATTERY – CHARGER – LINE LASER – ERGOPACK TOOL-LIFT – SEALING TOOL – CONTROL VIA INDUSTRY TOUCHSCREEN INTERESTED? WE WOULD BE HAPPY TO VISIT YOU AND CONFIGURE THE SYSTEM INDIVIDUALLY WITH YOU ON SITE. 700X WITH ELECTRONICALLY CONTROLLED DRIVE & CONTROL VIA JOYSTICK LITHIUM BATTERY CHARGER CONTROL VIA INDUSTRY TOUCHSCREEN

713E \ 726E \ 745E WITH – ELECTRONICALLY CONTROLLED DRIVE & CONTROL VIA JOYSTICK – 24V AGM BATTERY PACK – CHARGER – ERGOPACK TOOL-LIFT – SEALING HEAD We will be happy to discuss the individual configuration of your system in person after a product demonstration at your site. 700E WITH – ELECTRONICALLY CONTROLLED DRIVE & CONTROL VIA JOYSTICK – 24V AGM BATTERY PACK – CHARGER We will be happy to discuss the individual configuration of your system in person after a product demonstration at your site. 700 WITH – MANUALLY DRIVE VIA A HAND CRANK We will be happy to discuss the individual configuration of your system in person after a product demonstration at your site.