Automobile industry - Import export

Stamp mouldings for embossed or recessed stamping of aluminium or stainless steel sheets for the car industry. We produce the stamp mouldings in accordance with your data in soft or hard condition. Thanks to the high-quality structures, the movement between top and bottom dies is precisely coordinated. The design is based on your drawings or data.

From the initial concept to a safe and reliable series delivery, our customers get everything from a single source. They benefit from our decades of experience in manufacturing interiors as well as exteriors for the automotive industry.

The DC-voltage converters developed for the electronic components in the motor car are characterised by their ease of installation in every vehicle. The high degree of stability, the compact design, sustained short-circuit resistance as well as the high level of operating safety are the quality hallmarks of this series. The areas of application span the mobile employment of 12-V-consumers in vehicles with a 24-V-onboard network. The devices are particularly suitable for operating car radios, stereo units, radios, cooler units, car telephones, computers, 12-V-trailer lighting etc. The voltage converter converts an input direct voltage into an output direct voltage. The input voltage must be greater than the output voltage. No base load is required at the output end. A 26 kHz PWM switching controller is used for this purpose. Input and output are not isolated. The common earth is connected with the voltage converter housing.

Less wear, longer working lives In the automobile industry, environmental protection is also playing an ever greater role. With its dimensions, bodies form by far the largest part of recyclates in automobile recycling. One of the major challenges in crushing vehicle bodies is in the vulnerability to wear of many hammer axes. We have optimised our solutions over a number of years and supply hammer axes for large shredders in various diameters, which are characterised by extreme toughness and dimensional stability. This is how our clients profit from optimum working lives for their recycling machines.

Rapid developments in the fields of control engineering and in microprocessor and semiconductor technology have resulted in the widespread use of electronically controlled systems in every branch of industry today. This has created a need for sensors that are inexpensive but, at the same time, sufficiently robust, both electrically and mechanically, to withstand a wide range of temperatures (e.g. from -40 to +160 degrees centigrade), particularly in applications involving large quantities, such as the automobile industry. Fig. 1 provides a summary of the various types of sensors for angular and linear motion that are in use today. This paper is concerned with quality criteria (1) and (2) applicable to conductive-plastic potentiometers for use as sensors for angular and linear motion. Such potentiometers essentially comprise the following components: 1. The resistance element (support material + a resistance track of conductive plastic) 2. A wiper (precious metal alloy) 3. A...

Precise, reliable measurements of both static and dynamic torques in either direction can be made with this range of sensors. This opens a wide range of possible applications to the user. These torque sensors are standard equipment in a wide range of industrial automation, quality control and automotive components industry applications, as well as in laboratories. Typical applications: Screwing technology — Checking and adjusting bolting tools such as torque limiting wrenches, screwdrivers — Testing bolted connections Measuring the drag torque of motors and pumps — Frictional torques of gears, bearings and seals — Testing torsion springs — Adjusting equipment in the automobile industry (sunroof, power windows etc.) Strain gauges are mounted on the torsion shaft of the sensor element, itself made of steel, connected to form a full bridge.

Grooved blind rivets are suitable for riveting in blind holes in soft materials. They are used in the furniture industry, in interior fittings, in the wood and plastics processing industry, in car body construction and many more. Important: Before processing the grooved blind rivets, the drill hole diameter must be determined by testing and the minimum drill hole depth must be observed.

The here and now is electric. This is not exclusively true for cars and industrial trucks of various kinds. Even attachments for automated guided vehicle systems, forklift trucks or pedestrian stackers are now electrically powered. With the e-op series, KAUP has electrified the most important implement functions and its range includes Sideshifter, Fork Positioner, Rotator and Double Pallet Handler with electronic drives for a wide variety of material handling tasks.

n machine tending or direct machining (deburring, cutting, etc.), ASP covers are perfectly suited to machining environments encountered in the car industry. The fabrics employed satisfy the strictest requirements (resistance to wear, oils, shavings and chips, dust, abrasion, etc.) Covers that are tailor-made and repaired in our workshop provide the best protection for your robots in all typical hostile environments.

The permanent installed material hoist GEDA 850 ZM P offers a simple and good-value transport system for materials with a spacious, open top load platform. The well-know GEDA UNI-MAST-system stands for easy assembly directly from the load platform up to a height of 100 m. Without using a crane, you can put on the handy 1.5 m mast segments and secure them with captive screws and locking nuts. The hoist can be installed at buildings and machinery in the private sector and used by a limited, trained group of users. With a load capacity up to 850 kg and a lifting height of 9 m/min, the GEDA 850 ZM P has already proved itself as a helpful machine in warehouses of the tire and automobile industries.

The permanent installed material hoist GEDA 1200 ZM P offers a simple and good-value transport system for materials with a spacious, open top load platform. The GEDA VARIO-MAST-system stands for easy assembly directly from the load platform up to a height of 100 m. Without using a crane, you can put on the handy 1.5 m mast segments and secure them with captive screws and locking nuts. The hoist can be installed at buildings and machinery in the private sector and used by a limited, trained group of users. With a load capacity up to 1500 kg and a lifting height of 9 m/min, the GEDA 1200 ZM P has already proved itself as a helpful machine in warehouses of the tire and automobile industries.

Application Motor drives fan for a climatic wind tunnel for automobile industry.

EXCOR ABRIGO Solid Fibre Board with integrated EXCOR corrosion protection is used chiefly as interleaving sheets for stackable metal products, for instance in the automobile industry. EXCOR offers ABRIGO Solid Fibre Board in a variety of thicknesses and shapes. According to the customer’s wishes the board can be manufactured as a one-sided or two-sided product.

Flame retardants are classically used in building and construction, in the automobile industry, or in the field of electronics. Polyplast Müller offers flame retardants based on different substances which – after addition to the end product – prevent the spread of flames and flaming droplets and can reduce the formation of smoke.

Email : trasmme@gmail.com SKYPE : TRAS MM ============================== ZINC INGOT Usage: Mainly used for die-casting alloy battery industry Pharmaceutical / rubber industry Chemical industries zinc and other metal alloy plating coating industry in applied widely. Factory with strong supply ability silver white lustrous metal zinc ingot for die-casting alloy battery industry 1. mainly used for melting ingot 2. discontinuous melting with scrap 3. Used for industry such as automobile,pinning and weaving,electron broadly and so on

EPP CAN WITHSTAND HEAVY STRAIN. Technical molded parts made of expanded polypropylene (EPP) are indispensable in a number of industries – in car manufacturing, for example. Thanks to their outstanding energy-absorbing properties, EPP parts improve passive safety and provide better protection for vehicle occupants. Accordingly, they are used to make fenders, headrests, and other impact absorbers. EPP can absorb even more energy when used in combination with metal. One secondary benefit is the low weight of the innovative material: EPP molded parts thus cut fuel consumption and make cars more eco-friendly. Due to the fact that it can be precisely shaped, EPP also cuts a good figure elsewhere – as a sun visor, paneling, or a toolbox for precisely accommodating breakdown sets. Its extraordinary insulating ability is also the reason why notable manufacturers in the heating and air conditioning industry use EPP molded parts from Storopack for their products.

Lightweight structures in the automobile industry demand savings in materials and weight, while using materials and components with high load capacities. Plastic-moulded bushes take account of this development. They reinforce the plastic, make weak points for load-bearing functional elements and receive the pre-load forces of screw fastenings. The use of aluminium bushes saves even more weight, providing sophisticated solutions when combined with TAPTITE 2000® thread-rolling screws. Conform® bushes indicate high accuracy in length and diameter.