Automatics - Import export

Fully automatic welding helmet with extra bright view in light state (shade level 2.5) — Exact compliance of the set shade level thanks to digital auto darkening filter — Higher safety and relief to the eyes thanks to shade level 2.5 in light state — Optional: Comfort lining to add to the headband — With true colour filter for a true colour view — Never before seen realistic colour perception thanks to new sensor technology — Adjustable arc recognition angle by means of sensor slider — Infinitely adjustable shade level control — Operating unit outside helmet — Grinding mode — Synergic or manual welding mode

When operating pneumatic valves (diaphragm valves, etc.) special attention is placed on the protection of the control air system. The 5A compact safety valve reliably protects the control air system against media flowing back in case of leaks. The valve is automatic and therefore provides safety in the application.

Disinfectant dispenser with automatic spraying system. with wooden mounting Sensor range 0-12 cm (infrared sensor) Battery life (type AA) 1000 hours (batteries not included) 1000ml filling quantity Quantity per spraying process 1.2 ml Including security key for filling

Automatic desinfectant dispenser For wall mounting Infrared auto-sensing 0-12 cm sensing range 25ms response time battery working time 1000h (battery not included) liquid capacity 1000ml spraying volume 1.2ml

These are the parts used in valve.

These are the parts used for precision machine parts.

These parts are used in machinery accessories,produce by automatic turning machines.Precision work is demanding,machining tolerance is between +/-0.02mm.

These are the parts used in precision machinery,after processing, local sandblasting is carried out.

Automatically switching stamping presses are automatically advanced with an embossing stroke. Automatically switching are five points as a rule, the other points are switched manually.

New construction patented DE 20 2010 006 420*height adjustment by hand or cordless drill: precise,secure, quick*mobile and network-independent operation*integrated safety clutch*stainless steel plates*shear resistant pattern*top plate with Ø 10 mm hole*slip-proof rubber feet*suitable 1/4" bit for cordless drill included in delivery

New construction patented DE 20 2010 006 420*height adjustment by hand or cordless drill: precise,secure, quick*mobile and network-independent operation*integrated safety clutch*stainless steel plates*shear resistant pattern*top plate with Ø 10 mm hole*slip-proof rubber feet*suitable 1/4" bit for cordless drill included in delivery

New construction patented DE 20 2010 006 420*height adjustment by hand or cordless drill: precise,secure, quick*mobile and network-independent operation*integrated safety clutch*stainless steel plates*shear resistant pattern*top plate with Ø 10 mm hole*slip-proof rubber feet*suitable 1/4" bit for cordless drill included in delivery

Plastic film for automatic packing machines is primarily used for the following: E-commerce: as rolls for despatch packaging where the product is automatically wrapped in film, as new packaging for returned goods, etc. Pharmaceutical industry: for bundling and thereby securing the shipment of multiple packages Sanitary products: for packaging paper towels and tissues, nappies and other sanitary items Insulation industry: for packaging insulation boards using stretch packing machines Food industry: food packaging machines (frozen foods, fruit, vegetables, etc.)

Our Speedmax is the fastest available wire and tube forming automation solution available on the market for bending machines. By combining NC finger benders with our servo-electric transfer, the Speedmax with its 90 servo axes can reach a speed of up to 4,000 machining steps per minute. The SPEEDMAX is available in three variants (S,M,L). The SPEEDMAX (S) has 20 processing stations and can produce up to 200 parts per minute. The machine concept combines the advantages of 3D-NC wire bending and wire bending by slides. Bending, embossing, notching, flattening, joining, punching, swaging of tubes and wire are possible production technologies in the 20 processing stations. The new SPEEDMAX L has actually 20 processing stations and can produce up to 60 parts per minute. The SPEEDMAX L can work with tube and wire up to a diameter of 12mm and a feed length of 50cm. Various bends in all levels and in the current equipment up to four swaging processes are possible.

coating machine for large parts

coating system for high production quantities and individual transportation concepts

high performance coating of sophisticated parts

rotating spindle coating machine for larger quantities or longer process times

SPIROL's Model CR Semi-Automatic Heavy Duty Pin Inserter is a robust, vertical pin insertion machine ideally suited for moderate to high production for applications requiring up to 8kN (1,800 lbs) of installation force. A retractable pin orientation head, mounted on a shaft/linear bearing arrangement moves up and down for ease of loading and unloading of the components to be assembled. The insertion bushing is positioned close to the part for smooth, trouble free installation. The orientation head shuttles the pin from the feeding position to the installation position, and also functions as a selector, preventing longer or shorter pins from being installed. A two position trap door allows for easy clear-out of the feed tube.

High performance automatic circular saw for aluminum and non-ferrous metals Fully automatic operation Infinitely adjustable speed control of the saw blade engine Material and saw feeder movement through servo driven ball screw spindle 2 axis CNC control Siemens S7 with 7” touchscreen Cutting range: up to 205 mm height and up to 400 mm width Rest-piece length as short as 55 mm (depending on profile) Machine can use carbide (TCT) or PKD blades diameter 650 mm (smaller diameter upon request) Automatic kerf widening to reduce scratches Individually controllable clamping pressure Motorized material feed with servo driven ball screw Pneumatic material clamps individually adjustable Positioning of the vertical and horizontal clamps by hand-wheel Cut off lengths of up to 5000 mm are possible by reversing the material feed up to 5 times Floating material feed to reduce material abrasion Feeder length of 1000 mm Simple exchange of saw blade, accessible from the front Saw blade feed is...

Whether an individual circuit board or full-scale, demanding device assembly – PRUFREX will manufacture your products to your individual specifications and quality guidelines. Dispensing technologies allow us to adjust your components to additional requirements. Our range of services covers all dispensed materials, from adhesives through heat-conducting pastes to silicones. Depending on your project requirements, we offer you the most efficient routes to implementation – from manual production to CNC cells.

Burette with Schellbach stripes type Schilling / Bürkle with original Bürkle dosing armature. A universal aid in the laboratory, electroplating industry, water treatment plants, for field analyses, etc. Precise dosing using the press button, exact fine titration with the micro-screw and precise discharge jet. Graduation according to Category B (Tolerances according to DIN EN ISO 385).

Premium automatic vertical slicer Slicing without touching for maximum hygiene and optimal presentation The core component is a powerful blade drive with intelligent motor control Emotion®. Thanks to an automatic depositing system slices are laid out without manual handling and numerous depositing patterns allow optimal product presentation. The depositing system entirely made of stainless steel can be easily and quickly disassembled for thorough and efficient cleaning. The membrane keyboard with intuitive operating symbols ensures easy operation. Depositing patterns can be comfortably configured via direct keys and most frequently used keys can be permanently stored.

Semi-automatic machine for closing containers with nylon rolls or cans, ready to order, simple and practical for a few products

Challenger 200B is semi automatic linear system It’s designed for filling liquid or pasty products in plastic jar With five work stations: Adding jar on conveyor manually, filling, adding covers on jar manually, sealing cover (induction seal), Exiting.

The 200A is linear filling solutions for high and fast production needs. This heavy beast is designed to fulfill heavy-duty needs for big factories and production lines up to 24,000 unit/hour. The machines can be adjusted according to the need of the customer and may serve liquid, paste and molasses in all size ranges.

0 – 300 mm adjustable pneumatic material feed and digital display Vertical hydraulic punching unit to the right of the saw blade Power 200 KN Punching tools according to profile shape Aluminium profile – finished Cut to length Vertical punching Up to 8 profiles in one operation cycle Cycle time from 13 s / 1,63 s each piece Layout of punching tools for multiple profiles Quick change punching tools according to the profile shape Pneumatic material feed 8 profiles at once Special shaped quick change support Clamps according to profile shape – changeable Hydraulic punching unit Power 200 KN, stroke 20 mm Cycle spray mist device for each die and for the saw blade

Drive 7,5 kW, S 6, 400 V, 50 Hz, R.P.M. of sawblade infinitely adjustable (2.000 – 3.500 R.P.M.) Sawblade Ø 500mm, smaller blades on request Cutting range max. 215 x 120mm (height x width) Hydro pneumatic saw blade feed, Speed infinitely adjustable, linearly under the tabletop from rear to front Material fence on the table for the cutting angle Feed length limited via 4 end switch horizontal profile clamping device on the feed and discharge side Cycle spray mist device Pusher Profile feed from right to left with ball screw and servo motor Feed length from 10 to 2500 mm Feed speed max. 250 mm / sec. Repeatability +/- 0.1 mm iincl. horizontal pneumatic clamping device Reversing possible, max. Stroke length 7,300 mm Siemens S7-300 with touch screen 10“

Fully automatic operation Motor 7,5 KW, S6, 400V / 50 Hz, 2850 R.P.M. For the use of saw blade Ø 550 mm Big cutting range Max cutting height up to 150 mm Max cutting width up to 270 mm 90° cuts Remaining piece from 75 mm Table separation before sawblade retracts powered ball screw spindle material feeder up to 600mm Feed length up to 600mm, Multiple movement of the feeder possible up to 9,9 m