Automatic doors - Import export

Door Closer is a product that facilitates the quiet and safe closing of door. Used for various doors world wide such as medical facilities, offices, transportation equipment. Automatic door closing using the spring and hydraulic operation. Doing away with an arm provides a refined touch of door.

Cost-efficient transport between floors The vehicle lift CARRICO is an interesting alternative to the TRAFFICO when lower lifting heights and less frequent use are needed. The CARRICO has been type-tested in accordance with the EU Machinery Directive 2006/42/EC. The conveying speed is limited to 0.15 m/s. Furthermore, this car lift is delivered with automatic sliding doors and cabin equipment designed for the transport of vehicles and passengers. Functions of the components Door type: automatic sliding door (depending on the cabin width - 4- or 6-leaf) Entrances: front only / through Control: Control unit with micro-processor with extensive control functions Drive: Submersible hydraulic unit incl. screw spindle pump Advantages Saves on construction space as no ramp required Especially suitable for narrow shafts Cost-effective way to transport cars Easy to operate, manual hinged doors

Pallet based automated car parking system RESPACE Pallet based technology The pallet based automated car parking system RESPACE is an interesting solution for creating up to 50 parking spaces. Drivers park their car on a pallet in a cabin. The cabin is the only interface between the driver and the car park. From this point everything is automatic. The door of the cabin closes and the car is transported downwards by lift. From there the car standing on the pallet is brought to a free parking space via roller conveyors. The pallet based parking system RESPACE is characterized by a very compact design. From the lift the pallets with the vehicles are moved directly to adjacent parking spaces. Car parking and removal follows according the puzzle principle. The car park has 60 parking spaces and is used as a hotel car parking, but also available to the public.

E2 micro E-Chains® are very small, one-piece and two-piece (B07/B09) E-Chains® with a low weight and therefore ideal for highly dynamic applications. E2 micro E-Chains® are stable and available in many versions. igus® also offers numerous accessories and mounting options. "UPGrades" of the snap-open versions are available for many types; they are interchangeable among themselves and can thus be used as, among others, spare parts pack for new installation options. Other information Series 03 Inner height hi: 5 mm Inner widths Bi: 5 - 10 mm bending radii R: 10 - 28 mm Pitch: 10 mm E-Chain®, not-to-be-opened Series 04 Inner height hi: 7 mm Inner widths Bi: 7 - 30 mm bending radii R: 15 - 48 mm Pitch: 16,7 mm E-Chain®, not-to-be-opened Series 045 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, not-to-be-opened Series 05 Inner height hi: 10 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 06 Inner height hi: 10,5 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 08 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 25 - 48 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series B07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series B09 Inner height hi: 14,3 mm Inner widths Bi: 16 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series 074 Inner height hi: 10.9 mm Inner widths Bi: 10 - 40 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series 094 Inner height hi: 14,3 mm Inner widths Bi: 10 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series E2.10, openable along the outside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 10, openable on the inside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 10, closed Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, closed Series E2.15, openable along the outside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 15, openable on the inside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 15, closed Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 75 mm Pitch: 20 mm e-chain®, closed iF-Design-Award for E2 micro Series 05 Clean room test on request Special design: Electrically conductive ESD/Atex versions on request UL94-V0 classification for Series 03 and Series 14 (more on request) 42 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 06.10.038.0 E2 micro E-Chains® are very small, one-piece and two-piece (B07/B09) E-Chains® with a low weight and therefore ideal for highly dynamic applications. E2 micro E-Chains® are stable and available in many versions. igus® also offers numerous accessories and mounting options. "UPGrades" of the snap-open versions are available for many types; they are interchangeable among themselves and can thus be used as, among others, spare parts pack for new installation options. Series 03 Inner height hi: 5 mm Inner widths Bi: 5 - 10 mm bending radii R: 10 - 28 mm Pitch: 10 mm E-Chain®, not-to-be-opened Series 04 Inner height hi: 7 mm Inner widths Bi: 7 - 30 mm bending radii R: 15 - 48 mm Pitch: 16,7 mm E-Chain®, not-to-be-opened Series 045 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, not-to-be-opened Series 05 Inner height hi: 10 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 06 Inner height hi: 10,5 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 08 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 25 - 48 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series B07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series B09 Inner height hi: 14,3 mm Inner widths Bi: 16 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series 074 Inner height hi: 10.9 mm Inner widths Bi: 10 - 40 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series 094 Inner height hi: 14,3 mm Inner widths Bi: 10 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series E2.10, openable along the outside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 10, openable on the inside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 10, closed Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, closed Series E2.15, openable along the outside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 15, openable on the inside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 15, closed Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 75 mm Pitch: 20 mm e-chain®, closed E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of the E2 micro E-Chain®. Assembly Instructions Application examples Applications in various industrial sectors. E2 micro For restricted spaces One and two-piece E-Chains®, from 5 mm inner height High torsion resistance Smallest inner heights and bending radii Mounting brackets with strain relief optional Small pitch for silent operation Cable-friendly interior Low weight Large pins for a long service life Favorable internal/external dimensions ratio B07/B09 in two parts - Can be folded out in outer radius due to integral hinges Typical industrial sectors and applications General construction machinery Models (micro E-Chain®), Automatic doors Vehicles Measuring machines Electronics Handling systems Pick and place robot iF-Design-Award for E2 micro Series 05 Clean room test on request Special design: Electrically conductive ESD/Atex versions on request UL94-V0 classification for Series 03 and Series 14 (more on request) 42 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 06.10.038.0

The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator: Calculation of motor position according to customer-specific framework conditions — Speed control according to sensor input — Input of light barrier impulse signals — Reading a load balance via analogue inputs — Input of an external speed impulse

The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator: Calculation of motor position according to customer-specific framework conditions — Speed control according to sensor input — Input of light barrier impulse signals — Reading a load balance via analogue inputs — Input of an external speed impulse

The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator: Calculation of motor position according to customer-specific framework conditions — Speed control according to sensor input — Input of light barrier impulse signals — Reading a load balance via analogue inputs — Input of an external speed impulse

The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator: Calculation of motor position according to customer-specific framework conditions — Speed control according to sensor input — Input of light barrier impulse signals — Reading a load balance via analogue inputs — Input of an external speed impulse

The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator: Calculation of motor position according to customer-specific framework conditions — Speed control according to sensor input — Input of light barrier impulse signals — Reading a load balance via analogue inputs — Input of an external speed impulse

The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator: Calculation of motor position according to customer-specific framework conditions — Speed control according to sensor input — Input of light barrier impulse signals — Reading a load balance via analogue inputs — Input of an external speed impulse

The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator: Calculation of motor position according to customer-specific framework conditions — Speed control according to sensor input — Input of light barrier impulse signals — Reading a load balance via analogue inputs — Input of an external speed impulse

The system is a self-sufficient unit and is made of a solid welded frame, contains media preparation, a hydraulic unit, and electrical engineering. The pressure test bench has a secure test chamber for burst pressure and hydrostatic pressure tests and, optionally, a climatic chamber for pressure tests with environmental simulation. Depending on the option selected, pressure change tests up to 2,000 bar and 10 Hz can be generated. With the test circuit for hydrostatic and burst pressure tests, pressure ramps up to 3,000 bar can be generated. It is operated on a support arm PC. For pressure tests according to EG79 / EU406 – Section 4.2 Pressure booster for additional supply Displacement volume max. 15cm³ Frequency up to 10Hz Pressure Load Changes as sine & trapezoidal curve (depending on the expansion volume) Impulse intensifier for small volumes up to 2,000bar Safety test chamber with automatic door Media treatment with dirt and clean tank

The industrial system Ti3000 will get more than 1.5% more yield as compared to other systems at the tried and tested FESSMANN quality! Completely made of stainless steel and built steamtight out of panels, the Ti3000 is universally usable according to your specific needs. The central unit technology also convinces with its flexibility and best circulation air outputs at short process times.Panel construction and central unit technology for best air and process outputs Higher flexibility in implementation of customerspecific product requirements by smooth fan speeds Higher system capacities by faster process times = higher yield Use of all known supply trolleys for industrial use possible Use of "overlength" supply trolleys and transport frames Automatic door opener serially included Automatic CIP cleaning system serially included

The GEDA PH personnel and material hoist is now as a complete series available. Three standard versions have been developed up to now. All adjustable to desired specifications or conditions at construction site. Lifting height up to 400 m and three different lifting speeds and different car sizes are available. Both mast systems enable single and twin usage. You can choose between three standard control systems: stop next landing, single automatic or fully automatic. Different door systems in combination with the electrically and mechanically interlocked landing level gates round off the profile of the new PH range. The well-known engineered safety features like the over speed safety brake and overload protection or limit switches at the upper and lower level are of course part of the standard equipment. Of course the PH range is configurated according the new EN machinery directive 2006/42/EG or to national valid regulations.

The GEDA PH personnel and material hoist is now as a complete series available. Three standard versions have been developed up to now. All adjustable to desired specifications or conditions at construction site. Lifting height up to 400 m and three different lifting speeds and different car sizes are available. Both mast systems enable single and twin usage. You can choose between three standard control systems: stop next landing, single automatic or fully automatic. Different door systems in combination with the electrically and mechanically interlocked landing level gates round off the profile of the new PH range. The well-known engineered safety features like the over speed safety brake and overload protection or limit switches at the upper and lower level are of course part of the standard equipment. Of course the PH range is configurated according the new EN machinery directive 2006/42/EG or to national valid regulations.

Fits any style cabinet door Strong magnetic force Plastic parts surface to avoid corrosion Prevents the cabinet or cupboard doors from hitting the wall while opening Easy installation Fasteners could be provided

-sturdy steel construction with smooth interior walls -trap door operated by cable from the driver’s seat -rubber cushioning to lessen the impact when the trap door is opened -trap door closes automatically when the container is set down on the ground -can be secured to prevent slipping and unintentional trap door operation -suitable for forklift truck and crane -100 mm ground leeway, suitable for pallet truck -with 4 crane eyes Ø 40 mm -can be stacked (3 units) -spray painted or hot-dip galvanized -Volume (approx.) in m³: 0,5 / 0,75 / 1,0 / 1,5 / 2,0 -Load capacity in kg: 1000 -2000 kg Accessories -2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake - construction height 220 mm -galvanized lid, can be opened from both sides -trap door with galvanized guiding plates

The HASTalpha with touchscreen is the latest generation of semiautomatic controllers from OLIGO Lichttechnik GmbH – surface controls. It can be operated directly via the TFT touchscreen display. With the touch of a finger, individual light groups in lighting systems can be created and light secenarios custom programmed.

The semiautomatic color controller HAFST2.0 can be used to manually control programmed light scenarios with different color temperatures. Light scenarios can be programmed or retrieved on site with the help of the semiautomatic color controller.

Mobile stand on steering rollers for one CCO, pivoting, height adjustable

Mobile stand on steering rollers for two CCO and one sunlight-simulation

Mobile stand on steering rollers for four CCO

Mobile stand / mobile tunnel on steering rollers for up to ten surface control lights

Mobile stand on steering rollers for three surface control lights, pivoting, roratable, height adjustable

Mobile stand on steering rollers for two small surface control lights, rotatable

Mobile stand on steering rollers for one surface control or one color matching light

The HAFSTalpha is the latest generation of semiautomatic color controllers from OLIGO Lichttechnik GmbH – surface controls. Light scenarios and light groups can be quickly and conveniently programmed via TFT touchscreen display. A large overview display of the color matching booth visualizes the setting made.

The hand controller HST1.2 is used to manually control OLIGO surface control optics. All common surface control optics can be controlled via a dial with a large, clearly legible scale.

OLIGO surface control optics can be controlled using the semiautomatic controller HAST2.0. It enables the coordination of light scenarios and programmed light groups. The controller features function keys that can be specially assigned as well as four-line, alphanumeric display for viewing status information (performance, energy, operating hours).