At motors - Import export

Our motors perform a wide variety of industrial drive tasks. Reliably and effectively. For example, our type Z cylindrical-rotor brake motors – also as brake motors – offer high drive efficiency – also in continuous duty. They are specially designed to match our gearbox range and provide for simple project engineering. Our conical-rotor brake motors with outputs of up to 55 kW are used for stopping-and-starting drives or for direct line-fed travel applications. Thanks to their unique brake principle, they are the first choice wherever demanding requirements have to be met by the brake.

Our synchronous and asynchronous machines are distinguished by their high energy efficiency. The motors are reliable, safe to operate and robust. With our three-phase motors we offer special machines for almost any application. They are designed and built for the specific requirements of the respective drive application. We offer individually adapted motors – both in terms of electrical layout and mechanical design. We provide made-to-measure units, for example, for existing foundations or special bearings to absorb additional forces. The power network conditions on site are taken into account for the electrical layout to ensure that only minor voltage drops occur and a reliable run-up is guaranteed. Our portfolio comprises asynchronous motors with cage or slip-ring rotors as well as synchronous motors with brushless or static excitation.

The PSE 34x-14 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an EC-motor, gear, controller, measuring system and bus interface. The integrated electronic control feature frees up the machine´s central control unit. No external motors, proximity or limit switches are required. The absolute measuring system eliminates the need for time-consuming reference runs. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module. Address and baud rate switches simplify start-up. The instruments can be mounted on a spindle using the hollow shaft without the need for an additional coupling. Two bus connections are available for looping the bus signal (not for IO-Link).

The PSE 31x/33x-14 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an EC-motor, gear, controller, measuring system and bus interface. The integrated electronic control feature frees up the machine´s central control unit. No external motors, proximity or limit switches are required. The absolute measuring system eliminates the need for time-consuming reference runs. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module. Address and baud rate switches simplify start-up. The instruments can be mounted on a spindle using the hollow shaft without the need for an additional coupling. Two bus connections are available for looping the bus signal (not for IO-Link).

The PSE 30x/32x-14 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an EC-motor, gear, controller, measuring system and bus interface. The integrated electronic control feature frees up the machine´s central control unit. No external motors, proximity or limit switches are required. The absolute measuring system eliminates the need for time-consuming reference runs. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module. Address and baud rate switches simplify start-up. The instruments can be mounted on a spindle using the hollow shaft without the need for an additional coupling. Two bus connections are available for looping the bus signal (not for IO-Link).

The PSE 31x-8 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an EC-motor, gear, controller, measuring system and bus interface. The absolute measuring system eliminates the need for time-consuming reference runs. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module. Address and baud rate switches simplify start-up. The instruments can be mounted on a spindle using the hollow shaft without the need for an additional coupling. Two bus connections are available for looping the bus signal (not for IO-Link). Set-up mode or manual positioning permits the connection of jog keys (optional, not for IO-Link).

The PSE 272 positioning system is a complete system consisting of an actuator and a closed loop with a torque of up to 5 Nm. The target value is predefined via an analogue signal. The position is measured via an absolute measuring system and up to 15 rotations are possible. A release-input ensures additional security during positioning.

The PSE 30x-8 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an EC-motor, gear, controller, measuring system and bus interface. The absolute measuring system eliminates the need for time-consuming reference runs. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module. Address and baud rate switches simplify start-up. The instruments can be mounted on a spindle using the hollow shaft without the need for an additional coupling. Two bus connections are available for looping the bus signal (not for IO-Link). Set-up mode or manual positioning permits the connection of jog keys (optional, not for IO-Link).

The PSE 21x/23x-8 positioning systems are compact solutions with integrated intelligence that frees up the machine´s central control unit. The intelligent positioning system automatically adjusts auxiliary and positioning axes using a DC-motor, gear, controller, measuring system and CANopen, DeviceNet or Modbus RTU interface. No external motors, proximity or limit switches are required. The absolute measuring system at 64 revolutions (optional) eliminates the need for time-consuming reference runs and increases the efficiency of the machine. The economical motor also makes the system suitable for automation jobs that were previously uneconomic due to the cost. The separated supply voltages for the control and performance electronics provides an emergency shut-off function without interrupting communication with the control module. Address and baud rate switches (optional) simplify start-up, even without the knowledge of the control software.

The HIPERDRIVE HDA 70 positioning drive allows adjustment procedures for positioning and auxiliary axes to be performed efficiently, at low cost and with a high degree of precision. The HIPERDRIVE is available with Industrial Ethernet interface for direct connection to a control module. Status massages retrievable via bus. With an durable EC motor.

The PSE 200 positioning system is a complete system consisting of an actuator and a closed loop with a torque of up to 10 Nm. The target value is predefined via an analogue signal. The position is measured via an absolute measuring system and up to 50 rotations are possible. The position report is via an analogue signal 0 .. 10 V or 0/4 .. 20 mA. A release-input ensures additional security during positioning (optional).

permanent magnetic test bench motors for power train and component test applications

permanent magnetic test bench motors for power train and component test applications

permanent magnetic test bench motors for power train and component test applications

Find the suitable motor for your application: simply enter your requirements and receive suitable suggestions.

The new direct-current motors with worm gear enable quiet and economically efficient operation with drylin® lead screw units. The worm wheel has a spline to which the drive pin of the linear unit is connected. As a result, a motor flange and coupling are unnecessary and, this taken in conjunction with the motor adapter angled by 90°, the structure of the linear module is very compact. Thanks to the integrated magnetic rotary encoder (2-channel hall), the new DC motors are suitable for positioning. - Space-saving and compact design - Easy to fit - Quiet operation - Rotary position encoder included - Suitable for: SLW-BB, SAW, ZLW

Versatile choice due to the high torque and speed. This motor is the best choice for most applications with medium loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The connector interface provides a high IP65 protection level (IP: International Protection). The higher the IP rating, the better the motor is protected from the ingress of dirt and water. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.

This little motor has impressive torque and high RPMs. Reliable operation with quick movements of low loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.

For designs that require a stepper motor with directly integrated lead screw, drylin® E offers the ideal solution. The stand-alone versions with NEMA11 stepper motor (very small type) are available in a compact type with or without encoder. The lead screw is centred and in combination with the dryspin® high helix thread technology, the system has a long service life. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.

The reinforced version of the type 8035 sliding gate motor valve features a failsafe mechanical spring return. It is ideal where mechanical failsafe options are contained within the specification, e.g. steam and district heating systems. Metal bellows Position electronics Analog stroke feedback Limit switch Fail safe feature Control actuators or 3point actuators Thrust 1.2 kN; 3 kN Voltage 230 V AC, 24 V AC, 110/120 V AC

The sliding gate motor valve type 8036 is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. are easy to handle. Metal bellows Position electronics Analog stroke feedback Limit switch Fail safe feature . . . Control actuators or 3point actuators Voltage 230 VAC, 110/120 V AC, 24 VAC, 24 VDC

Features – DC permanent magnet motor – Graphit-copper brushes – Motor housing zinc plated and chromized – Ball bearings – Mounting holes to DIN standard 42016 General data – Nominal life 3000 h – Permissible shaft loads (axial): 40 N – Permissible shaft loads (radial): 100 N – Insulations class: DIN VDE 0530, E – Protectin class: DIN VDE 0530, IP 40 – RFI suppression: feasible

Watercooled electric motors can be realised in any possible mechanical and electrical customised version. They can be realised in vacuum tight version for fan drive on thermal treating oven.

Unexcited synchronous motors Reluctance motors are used in textile machinery as drive for godets and spinning pumps. In general they are used in inverter application as single drive or group drive. Reluctance motors can be realised for any voltage/frequency ratio U/f. Speed >15.000min1 is possible. A great no. of variations concerning special shaft, flange bearing and housing is available. Reluctance motors are available for hazardous locations in flameproof design.

Features – DC permanent magnet motor – Graphit-copper brushes – Motor housing zinc plated and chromized – Ball bearings – Mounting holes to DIN standard 42016 General data – Nominal life 3000 h – Permissible shaft loads (axial): 40 N – Permissible shaft loads (radial): 100 N – Insulations class: DIN VDE 0530, E – Protectin class: DIN VDE 0530, IP 40 – RFI suppression: feasible

The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator: Calculation of motor position according to customer-specific framework conditions — Speed control according to sensor input — Input of light barrier impulse signals — Reading a load balance via analogue inputs — Input of an external speed impulse

Features – 4-pole rotor with resin bonded NeFeB-magnets – 3-phase winding in delta-connexion – 3 inside hall sensors for rotor position detection – Housing made in aluminium – End shields in precision machined aluminium parts – Ballbearings on both sides

Features — 4-pole rotor with plastic-bonded magnets NeFeB — Threefold winding connected in delta — Internal Hall sensors for rotor position detection offest by 120° — Ball bearings — Multiple combination possibilities with gears, encoders, brakes — Power output in rated operation: 15,1 Watt — Multiple combination possibilities with gears, encoders, brakes and integrated electronics