Results for
IGUS® GMBH
Germany
iglidur® rollers in application 14HMInews.wmv Material data of the iglidur® elastomeric bandage Density: 1,25 g/cm³ Flexural E-modulus (DIN 53457): 130 Shore D hardness (DIN 53505): 50 Maximum long-term service temperature: 80 °C Maximum short-term service temperature: 110 °C Lower application temperature: - 40 °C Specific volume resistance:: <10¹² Ωcm Surface resistance: <10¹¹ Ω
Request for a quoteKEBA FASTENINGS
Germany
range consists of individually designed engineering solutions resulting in the creation of innovative and complex fastening elements formed in up to six blows. 100% adaptable to any application Minimization of materials used and inventory costs Multi-functional use allows for large savings Simple and ecient assembly Alternative and replacement of turned parts
Request for a quoteSPIES PACKAGING / SPIES KUNSTSTOFFE GMBH
Germany
Following the market trend, the new SPIES PC meets all requirements - from weight optimization and resource conservation to the use of renewable raw materials. Your desired article geometry can be developed individually.
Request for a quoteDYMAX EUROPE GMBH
Germany
Dymax 9801 is a LED or UV/Visible lightcurable material with superior adhesion properties for bonding camera modules, lidar, active alignment applications. The material cures with UV light but also features heatcure capability for applications where shadowed areas exist. Features: - Fast cure with LED or UV/Visible light - Low temperature heat cure (8085°C) - Moisture resistant - Thermal cycle resistant - Single component - Cold ship/Cold storage at 15°C - Passes ASTM E595 Outgassing Testing
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
The measuring element of the load cell consists of a double bending beam on which strain gages are applied. The applied force detunes the measuring bridge so that a proportional output voltage is generated. The strain gages on the measuring element are protected against dirt and water spray by a rubber bellows. The sensor can be easily mounted via two mounting holes. The tension or compression force to be measured is introduced at the opposite end perpendicular to the sensor axis. Due to its special design, the influence by an extension (e.g. touch finger) on the measuring signal is low. Overload protection can be realized with little effort using a mechanical stop. FEATURES For tension and compression forces Measuring ranges from 0 ... 5 N to 0 ... 2 kN Relative non-linearity: ≤ ±0.1 % F.S. Very low mounting height Simple force application Material aluminium or stainless steel Special design on request burster TEDS optionally available
Request for a quoteCINCHSEAL EUROPE GMBH
Germany
We manufacture ready-to-install standard and special flat gaskets in large and small series. Depending on the area of application, different materials are used. Flat gaskets are mostly static and are mainly installed between two flanges in apparatus and pipeline construction. Depending on the quantity and size, the most economical manufacturing process is used.
Request for a quoteSPANSET SECUTEX GMBH
Germany
With securoll secutex offers a specially developed coating for cylinders and rolls, which is cast in form or applied directly onto the roller core. During product development the vast experience of secutex with all types of coatings was introduced. secutex supplies a wide selection of securoll for almost any application. Material hardnesses of 55°90° Shore are supplied. The innovative process ensures high precision in the coating with very low tolerances as well as optimum and longterm bonding between the cylinder/roller core and the securoll material. This ensures that the securollcoated cylinders and rollers have a a high degree of mechanical strength and wear resistance. What does securoll offer? High abrasion resistance Different Shore hardnesses Temperature resistance Low tolerances Different surfaces Special forms Coated cylinder and rollers Noisereducing Protects materials Long service life Resistant to hydrolysis
Request for a quotePOREX TECHNOLOGIES GMBH
Germany
Customize foundation application with ultra-pure and hypoallergenic materials Ultra-pure and hypoallergenic, POREX® foam applicators and blenders are designed exclusively for skin contact, perfect for personal care applications - including powdered makeup, liquid foundation, skin care moisturizers and self-tanners. Available in custom colors and shapes, our foam applicators and blenders: Offer “buildable” application of makeup – Material enables sheer to full coverage. Soft to the touch– Soothing and friendly to the skin
Request for a quotePOREX TECHNOLOGIES GMBH
Germany
Flawless makeup application with revolutionary material designed for cosmetics Nubiform® technology is a revolutionary porous material designed for cosmetics, beauty and personal care products. Maintaining it's unique, open-cell porous structure in any shape - from flat sheets to 3D geometries - Nubiform material is ideal for cosmetic applicators. With the ability to be customized into 3D shapes, Nubiform: Ensures flawless application with flow-through technology and open-cell structure. Provides maximum comfort with soft and flexible material
Request for a quoteGUMMIWARENFABRIK EMIL SIMON GMBH & CO. KG
Germany
For use in floating or fixed pipelines. To handle fine and coarse-grained materials. Applications: Wet dredging, sand and gravel excavation, water to land transport pipe. Construction: Highly abrasion-resistant tube Tension and pressure-resistant special fabric inlays UV, ozone and weather-resistant, abrasion-resistant cover Interior and exterior smooth Sections cut to length with cuffed ends and/or widened hose endings or built in flanges. Other versions and dimensions on request.
Request for a quotePOREX TECHNOLOGIES GMBH
Germany
Customize foundation application with ultra-pure and hypoallergenic materials Ultra-pure and hypoallergenic, POREX® foam applicators and blenders are designed exclusively for skin contact, perfect for personal care applications - including powdered makeup, liquid foundation, skin care moisturizers and self-tanners. Available in custom colors and shapes, our foam applicators and blenders: Offer “buildable” application of makeup – Material enables sheer to full coverage. Soft to the touch– Soothing and friendly to the skin
Request for a quotePOREX TECHNOLOGIES GMBH
Germany
Flawless makeup application with revolutionary material designed for cosmetics Nubiform® technology is a revolutionary porous material designed for cosmetics, beauty and personal care products. Maintaining it's unique, open-cell porous structure in any shape - from flat sheets to 3D geometries - Nubiform material is ideal for cosmetic applicators. With the ability to be customized into 3D shapes, Nubiform: Ensures flawless application with flow-through technology and open-cell structure. Provides maximum comfort with soft and flexible material
Request for a quotePOREX TECHNOLOGIES GMBH
Germany
Customize foundation application with ultra-pure and hypoallergenic materials Ultra-pure and hypoallergenic, POREX® foam applicators and blenders are designed exclusively for skin contact, perfect for personal care applications - including powdered makeup, liquid foundation, skin care moisturizers and self-tanners. Available in custom colors and shapes, our foam applicators and blenders: Offer “buildable” application of makeup – Material enables sheer to full coverage. Soft to the touch– Soothing and friendly to the skin
Request for a quotePOREX TECHNOLOGIES GMBH
Germany
Flawless makeup application with revolutionary material designed for cosmetics Nubiform® technology is a revolutionary porous material designed for cosmetics, beauty and personal care products. Maintaining it's unique, open-cell porous structure in any shape - from flat sheets to 3D geometries - Nubiform material is ideal for cosmetic applicators. With the ability to be customized into 3D shapes, Nubiform: Ensures flawless application with flow-through technology and open-cell structure. Provides maximum comfort with soft and flexible material
Request for a quotePOREX TECHNOLOGIES GMBH
Germany
Customize foundation application with ultra-pure and hypoallergenic materials Ultra-pure and hypoallergenic, POREX® foam applicators and blenders are designed exclusively for skin contact, perfect for personal care applications - including powdered makeup, liquid foundation, skin care moisturizers and self-tanners. Available in custom colors and shapes, our foam applicators and blenders: Offer “buildable” application of makeup – Material enables sheer to full coverage. Soft to the touch– Soothing and friendly to the skin
Request for a quotePOREX TECHNOLOGIES GMBH
Germany
Flawless makeup application with revolutionary material designed for cosmetics Nubiform® technology is a revolutionary porous material designed for cosmetics, beauty and personal care products. Maintaining it's unique, open-cell porous structure in any shape - from flat sheets to 3D geometries - Nubiform material is ideal for cosmetic applicators. With the ability to be customized into 3D shapes, Nubiform: Ensures flawless application with flow-through technology and open-cell structure. Provides maximum comfort with soft and flexible material
Request for a quotePOREX TECHNOLOGIES GMBH
Germany
Customize foundation application with ultra-pure and hypoallergenic materials Ultra-pure and hypoallergenic, POREX® foam applicators and blenders are designed exclusively for skin contact, perfect for personal care applications - including powdered makeup, liquid foundation, skin care moisturizers and self-tanners. Available in custom colors and shapes, our foam applicators and blenders: Offer “buildable” application of makeup – Material enables sheer to full coverage. Soft to the touch– Soothing and friendly to the skin
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
POREX TECHNOLOGIES GMBH
Germany
Customize foundation application with ultra-pure and hypoallergenic materials Ultra-pure and hypoallergenic, POREX® foam applicators and blenders are designed exclusively for skin contact, perfect for personal care applications - including powdered makeup, liquid foundation, skin care moisturizers and self-tanners. Available in custom colors and shapes, our foam applicators and blenders: Offer “buildable” application of makeup – Material enables sheer to full coverage. Soft to the touch– Soothing and friendly to the skin
Request for a quotePOREX TECHNOLOGIES GMBH
Germany
Flawless makeup application with revolutionary material designed for cosmetics Nubiform® technology is a revolutionary porous material designed for cosmetics, beauty and personal care products. Maintaining it's unique, open-cell porous structure in any shape - from flat sheets to 3D geometries - Nubiform material is ideal for cosmetic applicators. With the ability to be customized into 3D shapes, Nubiform: Ensures flawless application with flow-through technology and open-cell structure. Provides maximum comfort with soft and flexible material
Request for a quotePOREX TECHNOLOGIES GMBH
Germany
Customize foundation application with ultra-pure and hypoallergenic materials Ultra-pure and hypoallergenic, POREX® foam applicators and blenders are designed exclusively for skin contact, perfect for personal care applications - including powdered makeup, liquid foundation, skin care moisturizers and self-tanners. Available in custom colors and shapes, our foam applicators and blenders: Offer “buildable” application of makeup – Material enables sheer to full coverage. Soft to the touch– Soothing and friendly to the skin
Request for a quotePOREX TECHNOLOGIES GMBH
Germany
Flawless makeup application with revolutionary material designed for cosmetics Nubiform® technology is a revolutionary porous material designed for cosmetics, beauty and personal care products. Maintaining it's unique, open-cell porous structure in any shape - from flat sheets to 3D geometries - Nubiform material is ideal for cosmetic applicators. With the ability to be customized into 3D shapes, Nubiform: Ensures flawless application with flow-through technology and open-cell structure. Provides maximum comfort with soft and flexible material
Request for a quoteSTRATE TECHNOLOGIE FÜR ABWASSER GMBH
Germany
The special lightweight aluminium design and silicone inserts of STRATE sandwich non-return valves SB makes them ideal for: Conveying air and gases up to temperatures of 200 °C Working pressures up to 4 bar Special applications with other valve insert materials on request
Request for a quoteSFS GROUP GERMANY GMBH
Germany
The GESIPA® TRI-FOLD® blind rivet forms three press lashes on the closing head side during setting. The advantages The large moulded lashes distribute the exerted clamping force evenly and gently onto the riveted material. Also, the large surface of the lashes offer excellent protection against the rivet being pulled through very soft, porous or brittle application parts. Thanks to its special design, the TRI-FOLD® is also able to compensate over-dimensional or irregular drill hole diameters. Application areas TRI-FOLD® blind rivets are excellently suited for the automotive field, e.g. for plastic panelling, car body parts and for the interior work inside vehicles, but also for all other applications that are particularly soft, brittle, easily deformed or porous.
Request for a quoteSFS GROUP GERMANY GMBH
Germany
Washer-shaped locking head This valuable locking head shape distributes the contact pressure evenly over the component, making it the perfect fastener for riveting soft and brittle components such as plastics and composites. Large clamping range One PolyBulb® blind rivet replaces up to three conventional blind rivets and reduces part variety. Combining multiple dimensions saves handling and storage costs and also permanently reduces the risk of confusion in the workplace. Controlled hole reveal By filling the hole according to the requirements, the PolyBulb® blind rivet creates an optimal connection. Customer benefits: • Washer-shaped blind head formation with large blind head diameter. • Aesthetic setting pattern, only one pronounced closing head • High tensile strength and unbonding force • Locked residual rivet mandrel • Rattle-free application • Process controllable
Request for a quoteSFS GROUP GERMANY GMBH
Germany
As a combination of blind rivet nut and screw, blind rivet nut studs offer an alternative or replacement for welding studs. The following applications are particularly suitable for the use of GESIPA® blind rivet nut studs: • Accessibility from one side only • Thin carrier materials (sheet metal, plastics, etc.) • Necessary pre-centering • On heat sensitive application materials (e.g. welding not possible) • Surface coatings must not be damaged • Production of electrically conductive joints • Fast replacement of welding studs (repairs) GESIPA® blind rivet nut studs can be set without any problem with the GESIPA® blind rivet nut setting tools FireBird®, GBM 95 and FireFox® using corresponding adapters (see tool description) for blind rivet nut studs
Request for a quoteMALEKI GMBH
Germany
One-component mineral filling and reprofiling mortar for the preparation of a waterproof coating on concrete or other cementitious substrates. Maleki-DS 240 is a universal waterproofing mortar for a wide range of applications. The material is an ideal supplement for waterproofing work in thicker layers and can be used in combination with Maleki-DS 220. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1329
Request for a quoteJÄGER-PLASTIK GMBH & CO. KG
Germany
The advantages for you at a glance: with opening assistance on top of the handle button closure with safety closure perfectly suitable for fruit bags (apples, pears, etc.) standard material: LDPE Application areas: Fruit bags, recycling carrier bags, reusable packagings, etc.
Request for a quoteJÄGER-PLASTIK GMBH & CO. KG
Germany
The advantages for you at a glance: with hook handle rack for hanging sales packaging standard material: PP Application areas: Hanging sales packaging, etc.
Request for a quoteJÄGER-PLASTIK GMBH & CO. KG
Germany
The advantages for you at a glance: with rounded handle edges easy to install high load possible for cardboard packagings standard material: HDPE Application areas: Cardboard packagings, etc.
Request for a quoteResults for
Application material - Import exportNumber of results
76 ProductsCountries
Company type
Category