Results for
SHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
These are the products used in fashion decoration products.The material are aluminum alloy,zinc alloy and brass and so on...
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Decorative corrosion protection on the basis of zinc and aluminium powder as a second layer over zinc sprays (e.g. OKS 2511) for forming a weather-resistant surface with aluminium gloss. Repair of galvanising interrupted or damaged during welding, drilling or cutting without subsequent painting Suitable as a decorative glossier coating than at normal zinc sprays Advantages and benefits Highly effective due to proven formula with high percentages of zinc and aluminium Combines outstanding zinc protection with decorative aluminium gloss Can be welded through well Economical due to low consumption and self-cleaning spray valve
Request for a quoteBÜRKLE GMBH
Germany
Easy-Click closure - stop-it can be opened and closed in any position - without tiresome screwing on and off. High quality material - stop-it made from the heat resistant and chemical resistant plastic PVDF. The clamp is galvanised steel. The hose clip can be used wherever the flow in hoses with liquids or gases needs to be regulated or stopped. Stepless flow regulation: With the hose clip stop-it's knurled screw, a stepless, delicate flow regulation or complete stop of the flow are possible, even for existing hose connections. The hose is compressed over a wide area against the sturdy steel hook in order to prevent it from being damaged.
Request for a quoteTOX-DÜBEL-TECHNIK GMBH
Germany
Features • Tension- and pressure-resistant fastening • No backing or wedging of the frame necessary • Corrosion protection due to aluminium-zinc coating • Fire resistant to DIN 4102 (class A1) Description & Area of Application • Galvanized metal frame wall plug, pre-assembled with metric countersunk screw M6 (driver PZ3) • Fire resistant to DIN 4102 (class A1) • Tension- and pressure-resistant fastening • Tightening the screw pulls the cone into the sleeve and spreads it open
Request for a quoteINOX VERTRIEBS GMBH
Germany
INOX intensive particle filter rinsing removes all soot residues and soiling in the particle filter. The rinsing liquid cleans gently and can safely be used on aluminum, magnesium, zinc and cadmium parts. The product is ideally suited for the latest generation of particle filters and is therefore suitable for all diesel particle filters. It is easily biodegradable and has significant cost advantages compared to installing a new filter!
Request for a quoteOTTO EICHHOFF GMBH & CO. KG
Germany
Metric: Screws from M2 x 10 – M30 x 1000 with thread (up to 100 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. Plates: From ST 2.9 x 19 – ST 6.3 x 160 / 80 mm with thread (up to 80 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. KTG screws for plastics: 30-degree thread (OEB Kunst). KTG 3 x 10 mm – KTG 8 x 160 mm with thread (up to 60 mm long). DIN 7500 thread grooving screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Furch). DIN 7513 – DIN 7516 thread cutting screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Schneid). Other thread types: With-Worth, HiLo, UNC/UNF, double-start, triple-start.
Request for a quoteROCHOLL GMBH
Germany
We offer a large number of materials used by the automotive industry. We will be pleased to supply you with raw and painted metals as well as automotive quality glass with or without ceramic coating. Do you wish to customize your test specimens by having a serial number applied to them? Then please contact us directly by phone or mail. All the plastic grades used in the automotive industry are available in the form of injection molded test specimens. Aluminum 6016 (with a thickness of 1.25 mm) Sheet steel grades DC06, DC04_HX420LAD+Z and DP600 Z140 on stock, further grades upon request Galvanized standard quality DX54D+Z100, DX54D+ Z140, DC04ZE50/50, DC04ZE75/75 (with a thickness of 0.8 mm); other grades upon request Higher-strength grades DP600+Z140 and HX420LAD+Z Die-cast aluminum, magnesium and zinc in various alloys Various steel or aluminum grades dimensioned for the impact test in accordance with ISO 11343 Laminated safety glass (LSG) and tempered safety glass (TSG)
Request for a quoteFRIEDR. FREEK GMBH
Germany
Occasionally also these terms are used for cartridge heates: heating cartridge, insertion heaters, spiral cartridge heaters. As a rule cartridge heaters consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention. There is a heating wire inside which is wound onto a ceramic core. The number of coils varies depending on the power. In order to avoid a short-circuit, the cartridge heater is filled with magnesium oxide and compressed afterwards. Highly compacted they reach a surface watt density of up to 50 W/cm² and withstand highest stress. In the plastics industry cartridge heaters are used in hot runners in order to temper thermoplasts during injection moulding processes. Other areas of applications for process heat are e. g. packaging, diecasting or continuous casting in which zinc or aluminium are processed. Further applications are to be found in mechanical as well as medical and laboratory engineering.
Request for a quoteDR.-ING. MAX SCHLÖTTER GMBH & CO. KG.
Germany
Pretreatment is a crucial step in electroplating. During the manufacturing of components, oils and fats are used to facilitate the machining of the workpieces and temporarily protect the metal surface from corrosion. Before the electroplating process, these oils and fats must be removed from the workpiece to be plated, as any residues can lead to coating defects. A thorough pretreatment is an important prerequisite for a high-quality coating. Depending on the process sequence, pretreatment may involve multiple steps. In this group of processes, Schlötter offers boiling or hot degreasing, electrolytic degreasing for a variety of base materials such as steel, copper, brass, as well as pretreatments for aluminum and zinc die casting.
Request for a quote4CR INTERNATIONAL GMBH
Germany
4CR 2320 Multifunctional Putty SF is a styrene-free putty with excellent adhesion on steel, zinc, aluminum, GRP & wood surfaces. Other significant features are fast drying times, easy sanding, non-porous application and high filling power.
WALTER STAUFFENBERG GMBH & CO. KG
Germany
Designed to be used as lockable filler ports for hydraulic reservoirs, allowing the reservoir to breathe whilst protecting it from contamination found in harsh environments Types ▪ SMBL-C (Clamping version) ▪ SMBL-P (Screw-in version) ▪ SMBL-P (Push-on version) Features ▪ Available as clamping version (with 3 clamping jaws), as threaded version (with female BSP thread) or push-on version, suitable for stand pipe mounting with pipe diameters up to 77,5 mm / 3.05 in (secured by 3 locking screws) ▪ Key-lockable cap (2 keys included) ▪ Lock protected by rotating flap ▪ Air flow in both directions, one direction only or no direction Materials ▪ Breather cap made of Aluminium, lacquered (light-grey, RAL 9022) ▪ Breather body made of Aluminium, zinc-plated ▪ Basket made of Steel, zinc-plated or Polypropylene (PP) ▪ Sealings made of NBR (Buna-N®) (standard option); FPM (Viton®) sealed version available Technical Data ▪ Operating temperature range: -30 °C ... +100 °C / -22 °F ......
Request for a quoteABS SAFETY GMBH
Germany
Depending on the subsurface (steel, copper, aluminium or titanium zinc), this stainless steel anchorage point can be installed on a metal roof using either aluminium or brass clamps. It is simply attached to a standing or copper standing seam using the specially-designed clamps supplied - completely penetration-free. EN 795:2012, A + CEN/TS 16415:2013 Freely-rotating anchor eyelet Clamped onto a seam without penetrating your roof surface Mounted on a single seam For steel and stainless steel ≥ 0.5 mm; copper ≥ 0.6 mm; titanium zinc and aluminium ≥ 0.7 mm For Rheinzink and similar systems Incl. installation set
Request for a quoteABS SAFETY GMBH
Germany
This stainless steel anchorage point can be installed on standing seam roofs made of steel, copper, aluminium or titanium zinc without penetrating the roof surface. Depending on the subsurface, this kind-to-your-roof device is attached using the aluminium or brass clamps supplied in the package. EN 795:2012, A + CEN/TS 16415:2017 Clamped onto two adjacent seams - completely penetration-free Seam intervals: 300 - 450 mm / 420 - 660 mm For steel and stainless steel ≥ 0.5 mm; copper ≥ 0.6 mm; aluminium & titanium zinc ≥ 0.7 mm For Rheinzink and similar systems; also suitable for copper standing seam panels (Cu) Incl. installation set
Request for a quoteABS SAFETY GMBH
Germany
This stainless steel intermediate bracket - specially designed for lifeline systems - was developed for penetration-free installation on a standing seam roof. This device is attached using aluminium or brass clamps depending on your subsurface (steel, copper, aluminium or titanium zinc). EN 795:2012, C + CEN/TS 16415:2017 Clamped onto a standing seam without penetrating your roof surface Mounted on a single seam For Rheinzink and similar systems; also suitable for copper standing seam panels (Cu) Designed exclusively for use in a lifeline system Incl. installation set
Request for a quoteABS SAFETY GMBH
Germany
This stainless steel, type B roof safety hook for metal seam roofs is suitable for all directions of load (apart from axial loads). It is simply clamped onto a seam without needing to penetrate the roof surface. Our roof hook is installed quickly and easily using the 4 nuts and bolts supplied. Roof safety hook in accordance with EN 517:2006, type B Anchorage point for PPE + ladder hooks For stainless steel ≥ 0.5mm; copper and titanium zinc ≥ 0.6mm; aluminium ≥ 0.7mm Simple, penetration-free installation using just 4 bolts Designed for rounded-edge and standing edge roofs Incl. stainless steel installation set
Request for a quoteFATH GMBH
Germany
Plate connector (set); To tee and Length-connect two aluminum profiles different sizes: — Profile 30, 40, 45, 80 — profile groove 8 or 10 Material selection: — Die-cast aluminium blank or aluminium-color — Zinc die-cast blank or aluminium-color — Plastic PA, glass fibre reinforced (black) Available separately or with various mounting setswith hammer nuts, T-slot nuts and (self-forming) screws! Other surfaces and other colors on request
Request for a quoteFATH GMBH
Germany
Angle connector 45°, for easy connection of two aluminium profiles at 45° angle without profile machining Different sizes and versions: — Profile 20, 30, 40, 45, 60, 80, 90 — Profile 25/1"; 51/25 - 2"/10"; 38 - 1,5"; 76/38 - 3"/1,5" — Profile slot 5; 6.5; 8; 10 Material: — Die-cast aluminium blank or aluminium color — Zinc Di-Cast blank or aluminium colot various models/designs: — Single — with cover cap plastic PA, glass fibre reinforced; optionally incl. mounting set Other surfaces, other colors on request! Translated with www.DeepL.com/Translator (free version)
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FATH GMBH
Germany
oints, for the movable connection of two profiles or panel elements, with or without locating pins; various models/versions: — with/without adjustable friction — with/without locking lever Model-dependent functions : — by tightening or loosening the screws you can seamlessly regulate the functionality of the joint or you can fix it in one position — by tightening or loosening the screws and the locking lever you can seamlessly regulate the functionality of the joint or you can fix it in one position different sizes: — Profile: 20, 30, 40, 45 — profile: 25/1"; 28/1.1"; 38/1.5" — Profile slot 5; 6; 8; 10 Material: — Die-cast aluminium — Zinc die-cast other joints: see friction joint
Request for a quoteFATH GMBH
Germany
Self-forming screw, Torx & Self-tapping screw, hexagon socket Connection of two aluminium profiles; no thread cutting is necessary to fix the screw; because of the special form of the head of the screw and the self-forming thread, a conductive connection of two proviles is achieved Material: Zinc plated steel Self-forming countersunk screw, with hexagon socket For all mounting applications of the front of the aluminium profile; detachable and reusable; designed for optimized fastening strength Material/surface: Steel burnished or galvanised Note: can be screwed on Cover cap available in the product portfolio Self-forming button-head Screw To fix connection angles, angles, turn-locks and other components to the core hole of the aluminum profile Material: zinc plated steel Alternative: Connecting screw M12x30 (optionally Torx) for connecting two aluminium profiles Material: zinc plated steel
Request for a quoteFATH GMBH
Germany
Swivel and fixed castor Fastening by means of special adapter plates (accessories) or integrated mounting plates especially for use with aluminum profile systems, as positive locking and anti-rotation fastening without lateral protrusion on aluminum profiles with pitch 38 mm -1.5", 40 mm and 45 mm Swivel castors with double locking device; the locking device prevents the wheel from rolling or turning Fixed castors have no lock wheel body diameter: 80/100/125 Tread: TPE gray RAL 7031/7024; solid rubber gray RAL 7001, black, PA, black plain bearing, Design: ESD-capable possible Material housing: steel, aluminum powder coated Material adapter plate: zinc die-cast, aluminum color powder-coated different load capacity: 600-1200 N Translated with www.DeepL.com/Translator (free version) possible accessories: extension arm
Request for a quoteHPM TECHNOLOGIE GMBH
Germany
Our high-performance machining oil SENTOS V-LR3 has a somewhat higher lubricity compared to our SURVOS products. This product also consists of volatile components that evaporate down to a lubrication residue of 3%. All components are approved according to USA-FDA §178.3910 as surface residues for the manufacture of food packaging. This makes our SENTOS optimally suited as a lubricant and drawing agent for punching and deep drawing (even with high contact pressures), for cutting and perforation of sheets (aluminium, steel, copper, brass, zinc-plated), including transformer and electric sheets, as well as for painted and coated sheets in particular. In addition, our SENTOS is especially well suited for cold profiling, bending and embossing, as a cooling lubricant for sawing, drilling, milling and engraving as well as a lubricant for cutting non-metallic materials.
Request for a quoteTRAS MM
Germany
Email : trasmme@gmail.com SKYPE : TRAS MM ============================== ZAMAK INGOT Zamak alloys were developed for the first time in the United States in 1929. The word Zamak comes from the German acronym and represents the elements it is made of: Z for Zink, zinc, A for Aluminum, aluminum, MA for Magnesium, magnesium, and K for Kupfer, copper. At its very beginning, Zamak was used just for decorative applications; later, the strength of this material determined its success in many other productions.
Request for a quoteResults for
Aluminum zinc - Import exportNumber of results
23 ProductsCountries
Company type
Category