Aluminium rounds - Import export

drylin® Q Square linear guides Square section tube made of hard-anodized aluminum Torque resistant without 2nd guidance Tolerates moments up to 10 Nm drylin® Q square section tube drylin® Q - bearing housing, adjustable Carriage version for all unsupported solutions Force absorption from all directions Anti-rotation Clearance is continuously adjustable manually drylin® Q - bearing housing drylin® Q - bearing housing, adjustable with hand clamp Carriage version for all unsupported solutions Force absorption from all directions Anti-rotation Clearance is continuously adjustable manually With manual clamp drylin® Q - bearing housing with manual clamp drylin® Q - housing bearing Q20 enclosed, anodized aluminium housing short design or tandem housing Torque resistant without 2nd guidance drylin® housing bearing Q20 drylin® W - flange bearing Flange pillow block made of anodized aluminum Round flange (01 version), square flange (02 version Standard type or tandem housing Torque resistant without 2nd guidance drylin® W - flange bearing drylin® Q - housing bearing Q10 Solid polymer bearing made of iglidur® J Very light Tolerates moments up to 3 Nm Space saving drylin® Q - housing bearing Q10 drylin® Q - accessory Based on a torque resistant square guide with 7.5 mm edge lengths Hollow chamber for supply lines (media, compressed air,cable) drylin® Q - accessory drylin® Q - gripper axis Toothed, hard-coated and corrosion protected square-hollow profile Move loads up to 500 g at speeds of up to 0.7 m/s Bearing made of iglidur® J Drive: NEMA11 stepper motor with gear wheel drylin® Q - gripper axis Move linear torque resistant, completely lubrication-free. The drylin® Q linear construction kit offers the user maximum flexibility in the design Individual housing options such as solid plastic bearings and adjustable complete housings with and without manual clamp are available. Due to the hollow chamber design, the rugged hard-anodised aluminium profile is very light and is suitable for the simultaneous conducting of supply cables. The mounting options are highly variable, among others, using slot nuts; installation size 20 can also combined with all 20/20 aluminium construction profiles. 1. Profile made of hard-anodized aluminum 2. Main body of the carriage made of aluminum 3. Customized clearance adjustment 4. Cover made of solid plastic 5. Gliding elements in high-performance polymer iglidur® J serve as a guide bearing and guarantee optimum running properties drylin® Q Square linear guides Square section tube made of hard-anodized aluminum Torque resistant without 2nd guidance Tolerates moments up to 10 Nm drylin® Q square section tube drylin® Q - bearing housing, adjustable Carriage version for all unsupported solutions Force absorption from all directions Anti-rotation Clearance is continuously adjustable manually drylin® Q - bearing housing drylin® Q - bearing housing, adjustable with hand clamp Carriage version for all unsupported solutions Force absorption from all directions Anti-rotation Clearance is continuously adjustable manually With manual clamp drylin® Q - bearing housing with manual clamp drylin® Q - housing bearing Q20 enclosed, anodized aluminium housing short design or tandem housing Torque resistant without 2nd guidance drylin® housing bearing Q20 drylin® W - flange bearing Flange pillow block made of anodized aluminum Round flange (01 version), square flange (02 version Standard type or tandem housing Torque resistant without 2nd guidance drylin® W - flange bearing drylin® Q - housing bearing Q10 Solid polymer bearing made of iglidur® J Very light Tolerates moments up to 3 Nm Space saving drylin® Q - housing bearing Q10 drylin® Q - accessory Based on a torque resistant square guide with 7.5 mm edge lengths Hollow chamber for supply lines (media, compressed air,cable) drylin® Q - accessory drylin® Q - gripper axis Toothed, hard-coated and corrosion protected square-hollow profile Move loads up to 500 g at speeds of up to 0.7 m/s Bearing made of iglidur® J Drive: NEMA11 stepper motor with gear wheel drylin® Q - gripper axis

On request, we can supply aluminium alloys in the form of rod or bar. These are available in most of the commercially available aluminium alloys. The tolerances of extruded aluminium rods and bars can also be further improved by subsequent drawing. In recent years, ALUnna has specialised in the production of rod and bar meeting the highest quality standards. If you require a specific delivery option for rod or bar such as special testing then we will definitely find a solution for you.

Robust handwheel made of aluminum casting. Rounded design with dirt corners minimized. Various sizes. Plastic-coated or bright-finished surface. Various hub versions. Turning handle as an option (see accessories).

The modern design of our menu card holder "Taxus" elegantly presents your single sheets. The slightly inclined angle is ideal for reading. An aluminum base rounded to the back provides a firm stand. Paper inserts can be easily slid into the acrylic pocket. Please note that when the poster is inserted, 10 mm at the bottom edge is covered by the base. The menu card holder is available in three formats.

The uniform, high-quality appearance of this triangular stand is ensured by the silver anodised click frames and the silver anodised aluminium round tubes. The simple assembly is done by screwing the 3 click frames to the 3 stable ø 60 mm aluminium legs. In order to effectively protect the inserted posters from rainwater, a circumferential sealing rubber is mounted on the weather-resistant metal rear walls, in addition the cover foil is glued to the rear wall on a short side. The cover foils used are made of non-reflecting, UV-stabilised material to prevent the posters from fading. Furthermore, the anti-reflection coating of the films ensures that the inserts are much easier to read even in sunlight. The posters can be changed quickly by opening the click frame profiles at the front. The highlight of this display is that the complete rear wall with foil can be removed for even easier poster changing.

aluDISC is the first round aluminium enclosure for industrial electronics and electronic components. The unique shape integrates perfectly into industrial machinery and piping systems. Whether fitted to the wall, integrated into a pipe system or a machine body – the round shape always makes a good impression. The lid already has a recess to accommodate membrane keypads or a front plate. A version with a fold-out, transparent lid with ingress protection IP 65 is also available. The snap-on design covers hide the screw channels. The enclosure can be mounted while closed. Practical lid supports are also available. Fastening domes in the bottom and the lid to accommodate e.g. circuit boards or mounting plates are also integrated as standard. Matching cable glands and more can also be supplied by us.

SPOT LED is a surprisingly compact luminaire with a lot of power: The round, robust aluminium housing of the SPOT LED combines three 3 LEDs, which allow either spot or area lighting, depending on the particular variant. And they're absolutely flicker-free. This means that it is not just the design of the integrated LED spotlight that is a feast for the eyes. • Maintenance-free LED technology • Strong high-power LEDs for maximum light • With narrow- or wide-beam illumination characteristic, as desired • Robust aluminium housing with solid safety glass screen • High degree of protection • Chemically resistant to many media such as oils or cooling lubricants • Direct connection to machine voltage

Ventilation chimney Suitable for integration in roof construction Designs: 3 mm aluminium natural All-round continuous venting

Ventilation dome: Type KL Design: 3 mm aluminium natural All-round continuous venting Options: 2K wet paint finish Fix-release flange for flat roof installation

Elegance is an attitude in life – perfectly match-ing with the case series Alu Design. Finely-rounded aluminium profiles and harmoniously designed edges made from impact proof plastic, create an elegant appearance and an incredibly long service life. The resistant surface in trendy colours, and optional digital print offers a great variety for the individualisation of your cases. We are able to manufacture almost any possible dimension, depending on the demands of the product that will be transported and protected by the case. The comprehensive range of accessories offers additional options and guarantees greatest creative freedom for the customer.

Available in a variety of sizes for HVAC, industrial, and condenser applications Our aluminum round tubes can be designed for many industrial and commercial uses, but are ideal for heat transfer applications where weight and space are design concerns, including in HVAC units, manifolds, evaporators, and condensers. Other applications include electrical conduits and general tubing for plumbing and construction. • Available in a variety of sizes for HVAC, industrial, and condenser applications • A wide array of aluminum alloys available • High-strength materials available for high-pressure applications • Internally scarfed round tube