Al systems - Import export

The EPS insert 12106 serves as a screed placeholder for the floor sockets 8604A and 9904A.

To sustain the high degree of camera performance, we expanded our portfolio by adding components and devices that facilitate a more holistic system assembly. All of our standard accessories are tested and verified for quality, fit, and performance. These are comple mented by task orientated, specialized components for multi-camera aggregation, signal multiplexing, synchronization, and the interconnection with various processing hosts. For embedded applications, compact computing solutions with dedicated carrier boards complete the system configuration

miromatic – Get in touch with us if you are interested in a used system. We will be delighted to tell you about our current stock.

Whenever pre-assembled cables need to be led into a housing, the cable entry system KADL is the perfect solution. KADL is installed with one click - easy and timesaving. The modular structure allows a step-by-step installation of 3 to 25 cables. With 16 different grommets a wide clamping range from 3 to 32,5 mm can be covered. - For applications where you need to insert and seal pre-assembled cables with connectors into housings - Tool-free entry and connecting technology for machines and equipment - Temperature range -30 °C to +100 °C - Protection grade IP65 - UL 514B - 12 different frame combinations with 16 sizes of grommets (accessory) - Click-in assembly at wall thickness from 1,5 - 2,0mm - For walls with thickness larger 2,0 mm the KADL can be fixed with standard screws

Systems & Modules SMS designs, manufactures and supplies complete systems & modules for evaporation, drying and membrane applications. Our scope of supply includes: Consulting / Feasibility Studies Pilot Test Process Design Plant Engineering Project Management Procurement / Manufacturing / Delivery Erection / Installation Start-Up / Commissioning After-Sales Service Skid-Mounted Modules For more than 40 years SMS has been supplying skid-mounted units for the benifit of our customers. The skids are fully assembled, including piping, wiring and testing in the SMS Workshop or in our partners´ workshop. The modular design significantly reduces the required amount of work for assembly and start-up which minimizes the downtime of the existing plant equipment and - as a result - just minor effects occur on the current production.

After cleaning we use drying systems in order to achieve spotless drying, to protect corrosion-sensitive parts or to avoid water intake into production. The drying systems can be integrated in manual or fully-automatic cleaning processes. KLN manufactures various drying systems in several versions.

With this machine system KLN has created a reasonably priced solution for aqueous part cleaning. Application is possible in all ranges of industry and for all kinds of contamination. The components can be compiled for any process in a modular construction system. They can be supplemented by all systems for tank care as well by an automation of the cleaning processes. The complete PWA series is available also in special sizes. The PWA cleaning tanks are available for determination of residual contamination.

Clearly organise small components and have everything at hand and in sight. In conjunction with our standard deep-drawn trays and a transparent cover insert, you can create storage for small components in a flash. * The exterior dimensions are measured without the feet: H + 4.7 mm Outside dimensions H* 71 x W 265 x D 171 mm Inside dimensions H 53 x W 254.5 x D 154.5 mm * The outside dimensions are measured without feet: H + 4.7 mm

The right system for every need There is a great variety of handling systems available, dependent on the length of the workpiece. For short tubes there are systems gripping from below with insertion axis and for long tubes there are systems handling from above. Both options can be used in our combination systems. They guarantee ideal access for the operator, so they can complete the setup and any maintenance operations in the best possible way. Transfer stations, turning modules for processing the tube in both directions within an installation and multiple grippers are available for optimized processes. Handling robots from many different manufacturers can also be integrated. The robots are used to move tubes/workpieces. A preassembly of different workpieces is also feasible in this case. The various components can be sorted using sensors and robots.

Lifting height up to 1,800 mm Load capacity up to 6000 kg The lifting tables in the Middle Class are available in any preferred size. Thanks to the modular design (base frame, scissor arms, hydraulic unit, platform sizes and options) they can be easily adapted to individual needs, taking into consideration also characteristics of loading/unloading areas. Benefits Infinitely variable hydraulic height adjustment Extensive project know-how Production according to German quality standards

Lifting height up to 12,500 mm Load capacity up to 100 t To bridge variable levels and for very heavy loads, we have developed highly effective solutions in the form of our Giant series of Lorry Lifts. These Lorry Lifts are designed for loads weighing up to 100 t and elevations of up to 15 m. The Giant HS 20 is capable of raising or lowering an entire truck of up to 20 m in length to the desired loading level. Benefits Platforms for all conventional types of truck Customer-specific superstructures Save time by conveying straight to the desired level Save space with the scissor lift platform instead of a ramp Compliant with the EU Machinery Directive 2006/42/EC Compliant with DIN EN 81-2 (on request)

Goods Only Lift with no pit requirement- SHERPA Efficient vertical transport of your goods The SHERPA goods only lift is our real all-rounder. It is an efficient and simple to plan solution for vertical transportation of goods in an industrial environment. In its standard configuration, the SHERPA has a load capacity of up to 3,000 kilograms and a lifting height of up to 18 meters (with two to six stopping points). The lift is delivered as a free-standing structure with sheet metal cladding. The required pit depth is very small and can be altogether avoided by choosing the ramp option. No building modifications are required. The lift can be easily integrated into existing building and rack systems. Thus, the installation is fast and easy. This goods only lift is a tailor-made lift. We work closely with our customers, extend our flexibility to design and offer fully customized cabin sizes.

CNC-table rack attachment (TAG) 4, 4 floors incl. inserts according to table WxDxH 575 x 375 x 525

CNC-table rack attachment TAG 2, 2 floors incl. inserts according to table WxDxH 575 x 375 x 300

ZWP is one of the leading independent manufacturer in Germany for gears, pinions and rim gears. We supply already well-known manufacturers for gear boxes. We are looking forward getting intouch with you to have a conversation about possibilities for your supply. Sectors of our (international) customers are: Mining, oil, offshore, rail and ship transmissions, industrial transmissions, and many more fields of applications. Overview about the capabilities for production: Gears internal and external toothed hardened and grinded Module 2 – 50 mm Diameter 100 – 2,000 mm Internal toothed rings / rim gears hardened and grinded Module up to 20 mm - more on request Diameter 100 to 1,800mm Pinions and shafts internal and external toothed hardened and grinded Module 1 – 50 mm Diameter 50 – 500 mm Length up to 1,500 mm Hardening and balancing inhouse possible Cooperation with companies for special manufacturing of gears and pinions etc We speak English.

ideally suited for large coil widths and thicknesses dual arbors for minimal deflection hydraulic wedge type expansion systems highestquality Reel Arbor with maintenancefree bearing and minimal deflection integrated hydraulically powered coil loading system for narrower coils even onesided use possible coil reels as seperate movable components proven support of large rollforming applications especially for the manufacture of welded tubes SHZR Series with variable speed drives via threephase motors and frequency inverter

Precise Fogless spray lubrication even with highviscosity lubricants. Powerful pumps and sophisticated accessories make almost any lube application possible.

lacquer supplis for the internal coating of tubes an aerosol cans

paint supply units for rolling and spray lacquer in the external decoration

Examples of materials for dosing: 1- and 2-component epoxy, UV / light-curing / thermosetting adhesives, highly filled materials, anaerobic adhesives, shear-sensitive adhesives, heat-conducting paste, sealants, flavourings, silver conductive paste, flux, perfume, isopropanol, industrial oils, silicone, alcohol, grease, paint and ink, MEK, braze paste, PU, acetone, petrol and many others. The preeflow® eco-DUO is a rotating, absolutely pressure-tight displacement system consisting of a self-sealing rotor and stator. The controlled rotary movement of the rotor generates the flow by displacing the medium in the stator. Pumping without changing the medium is guaranteed. As the material can also be conveyed backwards, preeflow® guarantees a clean, controlled material or medium tear-off without dripping. Application: - point dosing, with highest volumetric accuracy - bead application with application speed adjustable to the web speed - Potting technology

Master Soft-Close Hinge, half protruding 9 mm, drilling distance 45 mm, Material: steel nickel plated

The versatile control unit for handling, assembly technology, linear robots The unipos 330 is a universal, modular CNC continuous path control for up to 3 axes (interpolating) in connection with a PLC for controlling most reliable applications for machine construction automation technology, machine tools and special applications. Depending on the design, either stepper motors or servomotors are used as axis drives. The integrated panel PC with the LINUX operating system allows convenient programming of your application and the user interface (HMI). Features Interpolating continuous path control for a maximum of 3 servo axes CNC programming using G code 1 to 3 axes / stepper motors or servomotors Processor: 32-bit microcontroller, 400 MHz, without fan 7" touch screen, resolution: 800 x 480 DPI, TFT colour

Automatic clamping takes place over disc springs, which are adjustable in the pre-loading and are solved pneumatically to the workpiece change. Manual clamping is made by a knurled knob on the opposite side of the collet. Due to the integration into the existing through-hole of the rotary table, the rotary table with the clamping system remains very compactly. Compact High run-out accuracy Easy to operate Retrofit possible

The SteriPlast® sample scoop made of polystyrene is produced and assembled in our clean room of class 7 (10,000, except for the 1000 ml scoop), individually packaged for disposable use and then sterilised by gamma rays. The sample scoop is ideal for powders, granulates and pastes. The scoop with transparent cover can be closed immediately after sampling and the sterility and exclusion of contamination can therefore be safeguarded. Ergonomics were particularly important to us for the design of the sample scoop. The scoop stands horizontally due to the special handle design and the slightly angled front edge and can therefore be put down without the sample material trickling out.

Finned tubes for efficient heat exchange Large exchange area in a small space By using finned tubes (also known as corrugated rib tubes), optimal heat exchange can be achieved in a small space. By applying so-called ribs to smooth tubes, the exchange area of ​​the tubes is increased considerably. Finned tubes are usually used where an optimal temperature exchange between gaseous media and liquids is to be achieved. Different designs for every purpose In many cases, finned tubes are built into production machines as a component in machine and apparatus construction. Finned tubes can be designed for a variety of special application conditions. The length, the design and the ribbing can be individually adapted.

The CS 300 reliably integrates in existing scanner solutions in the checkout area Due to the extremely high availability and its flexible interface protocols this weighing system can be perfectly integrated in your cash register system. Integration in your existing cash register system Weighing system for integration of NCR scanner RealScan™ 79 Reliable, high performance multi-interval weighing system - made in Germany Choice between different hardware and software display solutions to show price and weight Data dialogs for common cash register systems included in the standard Power supply of scale via scanner

With vibration sorting, small batches / quantities can be processed individually up to 200 pieces per minute. Depending on the type of object, we recommend different designs / types – conical, cylindrical or stepped. Surfaces are preferably glass bead blasted or metaline coated (both variants have FDA approval). Mounting types are medium voltage and external voltage.

The drill head for carcass sampling has a hexagonal socket for bit holders or chucks, suitable for all commonly used cordless screwdrivers or drilling machines. Meat sampler for microbiological sampling of carcass surfaces. Slaughtering businesses (slaughterhouses, butcher's shops, etc.) are obligated as part of operational process control and for monitoring of slaughter hygiene to conduct regular microbiological examinations of carcasses for cattle, hogs, sheep, goats and horses, etc. The samplers for carcass sampling are similar to a cork drill. They can be used in the punch process (a destructive process, also called the cork drill or excision process) to remove a circular sample of tissue of 5 cm² from the surface. After the punch sample is cut out, it is removed from the carcass with a scalpel and tweezers.

Aroa disinfection column stationary stability combined with highquality pump dispensers in a stainless steel housing from our own production facilities. Handfree operation via elbow bracket made of stainless steel The Aroa disinfection systems are suitable for entry and exit areas, receptions, cash registers, counters and checkin counters in public facilities, schools, medical practices, agencies and retail environments and help you reduce the risk of smear infections for you, your customers and employees in highly frequented areas. Also available contactfree sensor dispensers made of ABS plastic with castors at the rear for mobile use Our products are available ex stock. Contact us at any time via gesundheit@geck.de or visit our website https//www.geck.de/en/healthpreventionsystems.