Ai - Import export

Technical information The basic model AI 01 is a stripping machine driven by an electric motor. Exact stripping of different insulated wires up to an outer diameter of 5 mm is possible. Adjustments are very easy to handle. In addition a special funnel to infeed a thin wire is also delivered.

Equipped with CAN or CANopen interfaces and a 19″ slide-in casing, the MicroControl µLAB is particulary suitable for measuring electric, thermal and mechanic signals in engine or components testing facilities The signal wires are connected to the module by plug-in connectors in the front plate.Current 0(4)…20 mA Accuracy 0.01% (FS) Resolution 16-bit (1 µA) Sampling rate 5ms / 200 Hz Galvanically isolated fieldbus Operating temperatures -40…+85 °C Supply voltage 9…36 V DC Connection via circular plug-in connectors Fieldbus CAN Protocol CANopen / Raw CAN

The µCAN.4.ai-F1 is the versatile universal measuring module for analogue standard signals. The module is designed to measure +/- 40 V or -20…+20 mA signals at an overall sampling rate of 4 kHz.Strain gauge full bridge Voltage +/- 60 mV Supply voltage 4.096 V Accurany 0.01 % (FS) Resolution 24-bit (0.01 µV) Sampling rate 1.25 ms / 800 Hz Parameterized via set-up software Casing powder coated 1 bi-color LED status indicator Fieldbus CAN Protocol Raw CAN

Technical information The cross-section range is reduced from 0.05 up to 2.5 mm² (AWG 30 – 14) and a special front plate is added. This machine can be used for shorter infeed lenght of 15 mm + stripping length.

The µCAN.4.ai-BOX is an extended universal measurement module for the acquisition of analogue standard signals. The device is designed for measuring signals of +/- 10 V, 0…20 mA or 4…20 mA. The CAN interface supports the protocol CANopen.

The sensor module µCAN.1.ai-SENSOR is designed to acquire an analogue signal. It can be integrated directly in the sensor head (18 mm in diameter). Sensor tolerances are adjustable. The sensor signal is linearized and monitored directly in the hardware.Voltage ± 10 V Current 0 mA … 20 mA Accuracy 0.005% (FS) Resolution 16-bit (1 mV / 1 µA) Sampling rate up to 1 kHz Scaling adjustable Sampling rate adjustable Measurement range adjustable Operating temperatures -40°C to +85 °C Supply voltage 9 V DC to 36 V DC Fieldbus CAN Classic / CAN FD Protocol CANopen / CANopen FD / J1939

Technical information The modification of the starting unit also enables this machine to strip lengths from 13 up to 30 mm.

The cable transmitter module µCAN.1.ai-TRS is designed to acquire one analogue measurement signal. The TRS module is integrated directly in the measurement line where the analogue signals are digitized and transmitted to the processing unit via CAN interface.

Equipped with CAN or CANopen interfaces and a 19″ slide-in casing, the MicroControl µLAB is particulary suitable for measuring electric, thermal and mechanic signals in engine or components testing facilities. The signal wires are connected to the module by plug-in connectors in the front plate.Voltage +/- 10 V Accuracy 0.01% (FS) Resolution 16-bit (1 µA) Sampling rate 5ms / 200 Hz Galvanically isolated fieldbus Operating temperatures -40…+85 °C Supply voltage 9…36 V DC Connection via circular plug-in connectors Fieldbus CAN Protocol CANopen / Raw CAN

The decentralized module µCAN.6.ai-SNAP is designed to acquire up to 6 analogue current / voltage signals and converts them into digital CAN signals.

The measurement data acquisition module µCAN.1.ai-SNAP acquires analogue measurement signals and links them to the digital CAN world.

The µCAN.1.ai-BOX is a decentralized universal data acquisition module for analogue standard signals (current / voltage). The CAN interface supports the protocol CANopen.

Technical information The AI 04 is a stripping machine driven by an electric motor. Exact stripping of different insulated wires up to an outer diameter of 8 mm is possible. Adjustments are very easy to handle with an adjustment knob.

Technical information The AI 2,5-20 auto is a stripping machine driven by an electric motor. It uses a system which detects the wire diameter and selects the cutting depth. Exact stripping of different insulated wires within the cross-section range of 0.5 up to 2.5 mm² (AWG20 – 14) is possible without an additional external adjustment. The stripping length and pull-off length are very easy to adjust.

Technical information The AI 04 is a stripping machine driven by an electric motor. Exact stripping of different insulated wires up to an outer diameter of 8 mm is possible. Adjustments are very easy to handle with an adjustment knob. Special: An integrated battery allows up to 7,500 working cycles when fully charged and without external power supply.

Technical information The AI 02 S3 is a stripping machine driven by an electric motor. Special feature: A special adapted funnel allows to insert two or three wires and strip it in a single step. By turning the stripping blades, the minimal stripping length can be reduced to 3 mm.

Technical information The AI 01 E is a stripping machine driven by an electric motor. Exact stripping of different insulated wires up to an outer diameter of 5 mm is possible. Adjustments are very easy to handle with an adjustmend knob. In addition a special funnel to infeed thin wires is also delivered. Special: An integrated battery allows up to 10,000 working cycles when fully charged and without external power supply.

Our fittings high quality is based on: – Modular system: you can make different connections with a few range of fittings. – Stainless steel: all parts are produced by certified stainless steel AISI 316 and AISI 316L. – Dimensions: we cover big dimensions up to 110. – Suitable for drinking water. – Easy assembly: our new design of the profile allows you to introduce the pipe into the fitting easily without extra-efforts.

Our fittings high quality is based on: – Patented design PPSU fitting, with three EPDM O-rings and inox sleeves. – Compatible with multilayer pipes. – Compatible with several jaw profiles, such as U, H, TH and RFz for fittings from 16 mm to 32 mm – Jaw profiles U, TH for 40 and 50 mm.

Our fittings high quality is based on: – Patented design PPSU fitting, with three EPDM O-rings and inox sleeves. – Compatible with multilayer pipes. – Compatible with several jaw profiles, such as U, H, TH and RFz for fittings from 16 mm to 32 mm – Jaw profiles U, TH for 40 and 50 mm.

Our fittings has been designed by our own European Engineers team. We designed an innovative a profile which avoids the risk of damaging the O-rings when the pipe is pushed on to the fitting. Our fittings high quality is based on: – Patented design brass fitting, with three EPDM O-rings and inox sleeves. – Triple safety with three O-rings in the designed fitting. – Manufactured under the technical standards DIN 50930-6 and UNE EN ISO 21003-3. – Compatible with multilayer pipes. – Compatible with several jaw profiles U, H, TH, RFz – Lead free brass available on request.

Our fittings high quality is based on: – Fittings compatible with PEX pipes without O- Rings – This completely range of fittings is designed in order to offer the most competitive solution for plumbing installations. – Fittings compatible with jaw profiles U and RFz. – Manufactured under the technical standard UNE EN ISO 15875-3.

Our fittings high quality is based on: – Fittings compatible with PEX pipes without O- Rings – This completely range of fittings is designed in order to offer the most competitive solution for plumbing installations. – Fittings compatible with jaw profiles U and RFz. – Manufactured under the technical standard UNE EN ISO 15875-3.

Our fittings high quality is based on: – Patented design brass fitting, with EPDM O-rings and inox sleeves – Manufactured under the technical standards DIN 50930-6 and UNE EN ISO 21003-3 – Compatible with multilayer pipes – Our fittings are compatible with several jaw profiles: Serie 7 (DN40, DN50, DN63 mm) – TH, U Serie 2 (DN63, DN75 mm) – U – Lead free brass available on request – Fittings starting by article code 2, with not fixed sleeve

Our fittings high quality is based on: – Patented design brass fitting, with EPDM O-rings and inox sleeves – Manufactured under the technical standards DIN 50930-6 and UNE EN ISO 21003-3 – Compatible with multilayer pipes – Our fittings are compatible with several jaw profiles: Serie 7 (DN40, DN50, DN63 mm) – TH, U Serie 2 (DN63, DN75 mm) – U – Lead free brass available on request – Fittings starting by article code 2, with not fixed sleeve

Our fittings high quality is based on: – Brass color fitting with an EPDM O-ring and inox sleeves. – Specially for dimensions of multilayer pipes 20×2,00 mm and 25×2,50 mm. – The most common items for a complete sanitary and heating installations are available in this range – Compatible with multilayer pipes – Fittings compatible with jaw profile U