Ag products - Import export

A cream is a spreadable formula intended for external use for the care and treatment of the skin. Creams consist of an aqueous and an oily component, which are combined as an emulsion. Structure of creams Cream is usually available in a jar, a tube or a tin. As care products, creams play an important role. They serve as the basis for embedding an active ingredient that is to be applied to the skin. Creams belong to the category of emulsions. They consist of an aqueous and an oily component. Oil and water normally do not dissolve in each other. Therefore, both raw materials are mixed together to an emulsion in a special process.

A cream is a spreadable formula intended for external use for the care and treatment of the skin. Creams consist of an aqueous and an oily component, which are combined as an emulsion. Structure of creams Cream is usually available in a jar, a tube or a tin. As care products, creams play an important role. They serve as the basis for embedding an active ingredient that is to be applied to the skin. Creams belong to the category of emulsions. They consist of an aqueous and an oily component. Oil and water normally do not dissolve in each other. Therefore, both raw materials are mixed together to an emulsion in a special process.

The industry standard for the highest hygienic checkweigher demands with unpacked foodstuffs The CWPmaxx hygienic checkweigher series has a particularly robust construction; it is ideally suited for use in the most difficult industrial wet cleaning environments. The hygienic design particularly required in the production areas within the food industry is exemplary. The CWPmaxx hygienic checkweigher weighs and checks unpack-aged products or open packages. The CWPmaxx is used where intensive wet cleaning occurs and high IP69 protection is required. The open design facilitates easy cleaning and minimises product build up and deposits. CWPmaxx hygienic checkweigher process scales are not only sturdy enough for high-pressure wet cleaning, but they were designed to meet the strict hygienic design requirements of the European Hygienic Engineering and Design Group (EHEDG): ergonomic, providing the maximum safety for unpack-aged foodstuffs with minimal structural components. Additionally...

Aluminiumwerk Unna AG is specialised in the production of Aluminium tubes. The Aluminium tubes are extruded on site using two possible methods. These are either Seamless extrusion or Porthole extrusion. It is quite simple to distinguish between the two extrusion methods. In seamless extrusion, a mandrel is positioned and fixed inside the extrusion die, creating the inner contour of the tube. In porthole extrusion, the mandrel is fixed and is supported by a number of integral bridges affixed to the outer portion of the extrusion die.

Alarm messages can be signalled optically and acoustically at the pumping station or transmitted remotely by mobile phone or phone line. Optical and acoustic alarm in 12 V DC technology for connection to the alarm unit AG 230/12. Product features Multi-tone series combined with xenon flash 32 different tones can be set Volume adjustable up to 105 dB Optical and acoustic signals can be triggered separately

s with the MS-PV-AG model, the products are fed manually by the operator. Product carriers and adjustable guide rails ensure a stable product transport. As soon as the thermal inkjet printer has printed the serialisation data, the integrated vision system checks that the data is correct. If an error is detected (e.g. insufficient grading), the product is removed from the process and fed to a lockable collection box. It is not taken into account during the formation of the aggregation pedigree and is ejected and marked in the shift register as soon as the error is detected. As soon as the filling quantity per carton is reached according to the specified packing scheme, the system automatically generates a serialized label for the shipping carton. It is applied manually by the operator and confirmed by a handheld scanner that the aggregation label has been applied.

ERC Guard Thermic for low-sulphur heating oil with a bio share and all other DIN heating oils slows the natural ageing of heating oil and contains an organic combustion enhancer. The Effect ERC Guard Thermic slows the natural ageing of heating oil. Stabilisers prevent components of the heating system from releasing into the heating oil and forming sediments, and/or accelerating the ageing of the heating oil. In the process, select active ingredients neutralise the ions already in the heating oil and apply a protective coating to the metal surfaces, which suppresses the release of new ions and protects against corrosion. In addition, the additive prevents the formation of resin-like, adhesive ageing products which arise due to the high thermal load of the heating oil within the pump and can block it. At the same time, lubrication of the pump is improved.

ERC Trak with BL-U 100 was specially developed for use in diesel generators with extended downtimes. THE EFFECT Many diesel engines are only operated sporadically or at certain times of year, such as in harvesting machinery, diesel generators, snowploughs, or sport boats. Their downtimes often exceed the storage life of the diesel fuel. Deposits and filter blockages may occur by aging products. Furthermore, increased corrosion may occur. THE RESULT With the newly developed additive ERC Trak with BL-U 100, the storage life and thermal stability of diesel fuel are doubled. Detergents clean and protect injection nozzles and injectors, the fuel system, and the engine interior. Engine efficiency and performance reliability are improved. ERC Trak with BL-U 100 sustainably prevents carbonisation on the injection nozzles and offers an additional extensive performance package for more power, a longer engine service life, and smoother running.

ERC Guard Bio Thermic is the first TÜV tested high-performance additive for heating oils with up to 20% bio-components. With organic combustion enhancers, can be used in all DIN heating oils. The Effect ERC Guard Bio Thermic is the first high-performance additive certified by TÜV NORD for low-sulphur heating oil with a bio share of up to 20%, combination with high sulphur heating oil (1.000 ppm sulphur) is also problem-free. The comparative endurance test of TÜV NORD demonstrated the spectacular effect of ERC Guard Bio Thermic on the low-sulphur heating oil used in the test. There were no ageing products on the tank bottom and no corrosion. The Result ERC Guard Bio Thermic assures stable heating oil flow through the nozzle. Even after a burner operating time of 1,510 hours, there was no increase of exhaust gas losses. The heating system with heating oil without additives operating in parallel was then measured as an emissions 'polluter'.

Terminal block marking with strong hooks for safe snap mounting. Material PVC Colors White or orange Print Etching Ink or Ink Text Alphanumerical and special characters. Temperature range Shape permanence between –30°C and +60°C (–22°F to +140°F) (PVC). Resistance Flammability resistance according to L94-V0. Resistance to chemicals meets Partex Product Test Programme. Resistance to temperature and ageing meets norms of Partex Product Test Programme. Attachment Snap-on

A module system based on the standard 17,5 mm unit. Material PVC Colors White or transparent. Print Ink Text Alphanumerical, large and small letters (0– 9, A–Ö, a– ö), standard number sequences and special characters in semi detached module strips. Temperature range From –20°C to +60°C (–4°F to +140°F). Resistance Flammability resistance according to UL94-V0. Resistance to chemicals meets Partex Product Test Programme. Resistance to temperature and ageing meets norms of Partex Product Test Programme.

Cable marker holder with wings Material PVC Colors Clear transparent. Temperature range Shape permanence from –30°C to +60°C (–22°F to +140°F). Resistance Flammability resistance according to UL94-V0. Resistance to chemicals meets Partex Product Test Program (except for battery acid). Resistance to temperature and ageing meets norms of Partex Product Test Program. Attachment Cable tie

Holder for marker tags with punched holes for mounting with cable ties. Material PVC Colors Transparent. Temperature range Shape permanence from –30°C to +60°C (–22°F to +140°F). Resistance Flammability resistance according to UL94-V0. Resistance to chemicals meets Partex Product Test Program. Resistance to temperature and ageing meets norms of Partex Product Test Program. Attachment Cable tie

Closed cable marker. Material PK-20Q: PVC PKZ20Q: Zerex Colors Standard colours yellow and white and international colour code for 0-9. Print Etching black ink Text Alphanumerical and special characters. Temperature range Shape permanence from –30°C to +60°C (–22°F to +140°F). Resistance Flammability resistance according to UL94-V0. Resistance to chemicals meets Partex Product Test Program (except for transformer oil). Resistance to temperature and ageing meets norms of Partex Product Test Programme. Attachment PKB

Closed combination marker. Material PVC Colors Standard colours white and yellow 11 colours acording to the international colur code Print Single character: Hot stamped Multi character: Ink Text Alphanumerical and special characters Resistance Flammability resistance: according to UL94-V0 Chemical resistance: According to Partex product test programme Resistance to temperature and ageing meets norms of Partex Product Test Programme.

Fixtures Closed cable marker. Material PK: PVC PKZ: Halogen free (ZEREX) Colors Standard colours yellow and white and international colour code for 0-9. Print Singel characters: Hot stamped Multi character: ink Text Alphanumerical and special characters. Temperature range PK: –30°C to +60°C (–22°F to +140°F). PKZ: –30°C to +90°C (–22°F to +194°F). Resistance Flammability resistance according to UL94-V0. Resistance to chemicals meets Partex Product Test Program (except for transformer oil). Resistance to temperature and ageing meets norms of Partex Product Test Programme. Attachment PKH, POH, PKB

Fixtures Closed combination marker. Material PA/PA+: PVC PAZ: Halogen free (ZEREX) Colors PA: Standard colours yellow and white and international colour code for 0-9. PA+/PAZ: Standard colours yellow and white. For additional colours please contact Partex. Print Single character: Hot stamped Multi character: Ink Text Alphanumerical and special characters. Temperature range PA/PA+: –30°C to +60°C (–22°F to +140°F). PAZ: –30°C to +90°C (–22°F to +192°F). Resistance Flammability resistance according to UL94-V0. Resistance to chemicals meets Partex Product Test Program. Resistance to temperature and ageing meets norms of Partex Product Test Program

Closed marker holder with a pocket to hold marker tags Material PT+: PVC PTZ+: Halogenfri (ZEREX) Colors PT+: Clear transparent. PTZ+: Yellow sleeve, transparent pocket Temperature range PT+: Shape permanence from –30°C to +60°C (–22°F to +140°F). NB! Only the sleeve. PTZ+: –30°C to +90°C (–22°F to +194°F). NB! Only sleeve. Resistance Flammability resistance according to UL94-V0. Resistance to chemicals meets Partex Product Test Programme (except for battery acid). Resistance to temperature and ageing meets norms of Partex Product Test Programme.

Fixtures Open marker. Material PC: PVC PCZ: Halogen free (ZEREX) Colors Standard colours yellow and white international colour code for 0-9. Print Hot stamped or etching ink Text Alphanumerical and special characters. Temperature range PC: –30°C and +60°C (–22°F and +140°F). PCZ: –30°C and +90°C (–22°F and +194°F). Resistance Flammability resistance according to UL94-V0 (PC). Flammability resistance according to UL94-V0 (PCZ). Resistance to chemicals meets Partex Product Test Programme. Resistance to temperature and ageing meets norms of Partex Product Test Programme. Attachment Snap-on

For glass manufacturer Zwiesel Kristallglas AG, demand for material and product innovations is only matched by their need for innovative packaging solutions. All packaging must deliver excellent product protection with an aesthetic look that appeals to target consumers. Sustainability and optimised logistics are also important factors.

Being the smallest model of the new Q series, the Q 1500 achieves precise plasma cuts at the highest level for material thicknesses of up to 60 mm and with a maximum cutting current of 150 A. New components and especially the operator interface Q-Desk meet the complex requirements of a digitalised production in the age of Industry 4.0. The specially developed browser-based operator interface Q-Desk provides real-time process data and information of all plant components on any standard device and location-independent. The user benefits from extensive information enabling him to plan and execute a variety of maintenance tasks as guided by the system. This generation of plasma cutting systems is the result of intensive research and development work by Kjellberg and a landmark in the 60 years of Kjellberg's plasma history. The new digital plasma series Q sets pioneering standards regarding quality and connectivity.