3 in 1 - Import export

- Lockable valuables compartment with slot, available with open storage shelf - Open compartment for turnout gear readily accessible and properly stored - Helmet compartment with perforated base allows for quicker drying of helmets - Prepared for wall assembly easy to anchor and align Helmet compartment: Thanks to the cut-out at the rear of the helmet compartment, the neck protector can be stored properly, without buckling. The recessed shelf makes it easier to store large helmets. Ventilation holes allow for quick drying. Metal hooks: There are 2 sturdy material hooks located on the side of the compartment. The position can be changed according to your needs; further hooks can be added. The clothes rail made of oval profile is fitted with metal hooks. These are both non-twisting and non-tilting. Variants: - number of compartments: 1; 2; 3 - compartment width: 40 cm; 50 cm - great variaty of colours - different locks

- Aluminium clothes rail made of oval profile 3 non-twisting, non-tilting metal hooks - Material hooks fixed at the side position can be changed as needed - Prepared for wall assembly, easy to anchor and align - Perforated base plate guarantees that moisture to drip away Valuables compartment: The open storage shelf can be replaced by a lockable valuables compartment if needed. The compartment door has a slot for letters and documents. Integrated rubber pads ensure quiet closure of the door. Helmet holder: The gear locker is equipped with the ergonomic helmet holder as standard. An alternative accessory is our flexible helmet holder. Thanks to the round shape, the helmet is stored with care, as though on your head. Good ventilation is guaranteed. Variants: - number of compartments: 1; 2; 3 - compartment width: 30 cm; 40 cm; 50 cm - Light grey, Flame red and Gentian blue are included, further on demand. - different locks

- Aluminium clothes rail made of oval profile three non-twisting, non-tilting metal hooks - Label frames for name plates, recessed in the body - Prepared for wall assembly easy to anchor and align - Ventilation slots in the body for good air circulation in the helmet compartment Valuables compartment: JUNIOR makes it possible to store turnout gear for quick access at children eye level. In the upper spacious compartment there is plenty of room for helmets and additional equipment as well. Alternatively, a lockable door turns this into a valuables compartment. Optionally, a helmet holder can be attached to the cabinet. Stability: The JUNIOR is made with the well-known rotstahl® quality with increased material thickness and rugged metal hooks. The sturdy aluminium clothes rail is equipped with non-twisting and non-tilting clothes hooks. Variants: - number of compartments: 1; 2; 3 - great variaty of colours - different locks

Properties • laterally stiff • suitable for knife edges • Belt support: Slider bed (support rollers possible

We produce aluminium pipe bends with the following characteristics and product specifications: DIN EN 573-3, 755-1, /-2 /-9

Sustainable solution for process measurement, control and data log Compatible to the wide range of INFICON active gauges, the new VGC50x series of active gauge controllers are able to monitor and data log the entire pressure range from 10⁻¹⁰ to 1500 mbar (10⁻¹⁰ to 1125 Torr) and the set point status. 1×10 -3×F.S. …1×F.S. 1×10 -3×F.S. …1×F.S. 1×10 -3×F.S. …1×F.S. 5×10 -4…1500 5×10 -4…1500 5×10 -4…1500 5×10 -10…1500 5×10 -10…1500 5×10 -10…1500 mbar, Torr, Pa, hPa, Micron, V mbar, Torr, Pa, hPa, Micron, V mbar, Torr, Pa, hPa, Micron, V

Guide slide - underground is available for hoses in 3/4", 1" and 1 1/4", with snap hook on one side. Frame in stainless steel, slide in black plastic.

Set of self-adhesive cable clips. For securing 1, 2, 3 and 4 USB cables. • Self-adhesive cable clips for 1, 2, 3 and 4 USB cables for tidy cable management • Can be used on smooth, clean surfaces • Ideal for quickly organising telephone or USB cables up to a diameter of 5 mm • Ensure added safety at the workplace • Contents: 2x clips each for 1, 2 and 3 cables, 1x clip for 4 cables • Made from flexible plastic

Use the best range of tools in parallel to the laser! Use the laser plus two mechanical tools in parallel on one machine. The entire high-quality range of Zünd tools is available for you. Extend your machining and material options without expensive additional investments. This gives you up to three tools in parallel on one machine a range of tools with uncountable possible combinations high-quality, market-tested tools from Zünd Systemtechnik AG maximum versatility additional options for combining the high-quality camera for printed materials with all tools high speed and stability in the machining process bayonet lock for fast tool changes Maximum versatility and the right tool for every application! The modularity of the eurolaser systems means you can fulfil every customer wish and are at home in every market.

Fire protection duct I120/E90, to DIN 4102 part 11 and part 12, including 12 x countersunk head screws and 3 x 1 m sealing strip.

MMP 100 2 - 3 1

ASE 2 - 3 1 - 2

MMP 100-R 2 - 3 1

ASE-RA 2 - 3 1 - 2

MMS 100/200 2 - 3 1 - 2

LP 2 3 Illumination with 1 or 2 LEDs

1 to 3 molding heads Double Spindle Design For gentle products transport Diaphragm adjustable from 10mm. up to 9cm CIP System A vacuum equipped to avoid production interruption or product damage. Conical Feeding system Productivity starts from 8000 pcs/hr. up to 24000 pcs/hr Easy to use electric control panel Available certification up on your request: UL, CE, GMP, FDA, ASME. Available documents up on your request: I.Q (Installation qualification), O.Q Operational qualification), P.Q Performance qualification.

DESCRIPTION High stability on high capacity. Can handle multiple Viscosity types Type of metal used S.S 316 / 304 Certifications ISO 90012015, OHSAS 180012007, ISO 500012011, ISO 450012018 SPECIFICATION 1 to 3 molding heads Double Spindle Design For gentle products transport Diaphragm adjustable from 10mm. up to 9cm CIP System A vacuum equipped to avoid production interruption or product damage. Conical Feeding system Productivity starts from 8000 pcs/hr. up to 24000 pcs/hr Easy to use electric control panel Available certification up on your request UL, CE, GMP, FDA, ASME. Available documents up on your request I.Q (Installation qualification), O.Q Operational qualification), P.Q Performance qualification.

Cable Reel KA with Neoprene grounding cable (1 x 6 mm 2) and 1-pole Grounding Clamp. For connection to EKK-3, EKN-3 or EKS-3 Grounding Control Device. Delivery includes a set of MEGI buffers. Purchase of equipment for German customers only. Please contact your local sales partner . no contact resistances in the grounding cable due to slip-ring-free technology approved for use in gas and dust hazardous areas of zone 1 operating temperature from -25 °C to + 60 °C

Expandable coiled grounding cable with 1-pole Grounding Clamp for connection to EKK-3, EKN-3 or EKS-3 Grounding Control Device. Purchase of equipment for German customers only. Please contact your local sales partner . operating temperature from -25 °C to +70 °C durable by short lay length and cable stranding according to class 6 UV-resistant oil resistant according to VDE 0472, part 803/B high restoring force of coiling silicone-free

The Select laser class 1 welding system offers maximum flexibility for complex welding tasks with 3 different operating modes (manual, semiautomatic and CNC), large working chamber space for bulky/heavy components and servo motorcontrolled linear axes. The system is easily controlled via a multifunctional joystick and/or a touchscreen display, which allows all inputs and parameters to be intuitively entered, managed and saved for recurring tasks.

The control units AQ1 and AQ3 are equipped with 1 and 3 motor connections respectively and are designed for all Assfalg handpiece electric grinders. The control units support infinitely variable speed control and store the set maximum speeds for each connection individually. The intelligent control electronics enable applications that previously required a large number of control units. At the same time, the peak power of up to 300 watts allows the most demanding materials to be processed.