• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • 1 m

Results for

1 m - Import export

GermanyManufacturer/producer

Germany

Verified by Europages

Application optimized read/write heads in the industry-standard design (up to IP69K with HF), allow for optimal integration into your application. Depending on the environmental conditions, read-write ranges of up to 1 m (HF) or several meters (UHF) are possible. The radio interface for read/write heads and data carriers is internationally standardized (ISO 15693 and ISO 18000-6c with HF at UHF).

Request for a quote

Germany

Verified by Europages

FTA Floating moving end Compensate parallel errors The igus® compensator for gliding applications with E2/000 and small E4.1 energy chains. At moving arms with strong lateral offset the floating moving end provides for a compensation and therefore for a force-free run of the energy chain in the guide trough. This extends the life time of your application. -Small, light and low priced -Compatible with PPDS basic analysis units -The basic ”floating moving end“ can be used with the following chain series: 2500, 2700, 3500, E4.28, E4.32 and E4.42 Max. travel distance:100m Max. acceleration: up zo 50m = 2 m/s 2 | 50-100m = 1 m/s 2

Request for a quote

Germany

Verified by Europages

Control ranges from 30 to 300 bar. In sizes 1/8 - 1/4 - M 10 x 1 - M 12 x 1.5.

Request for a quote

Germany

Verified by Europages

In sizes 1/8 - 1/2 - 3/8 - M 10 x 1 - M 12 - M14 - M22 Switching ranges from 30 - 90 °C

Request for a quote

Germany

Verified by Europages

In sizes 1/8 - 1/4 - M 10 x 1 Static pressure up to 400 bar

Request for a quote

Germany

Verified by Europages

For controlled and steered bores, In limited space, for high precision requirements, For house service connections on sloping terrains, beneath stairs, walls etc., bores that can’t be established using a soil displacement hammer up to 50 m bore lengths, For bores directly out of the building, as the machine is able to be dismantled, For bores out of manholes from 1 m diameter on (PIT S), For a quick, clean and economic jobsite execution.

Request for a quote

Germany

Verified by Europages

1 internal /*1 external thread M 10*Ø 12 mm*size of jaw 10 mm

Request for a quote

Germany

Verified by Europages

The artist of the area management: On less than 1 m² the "Delux" displays 18 different print media, brochures and flyers, decorative and protected. The wall brochure holder becomes an individual wall magazine. Your flyers and advertising media are 100% visible as the display is completely transparent. The brochure hanger made of unbreakable acrylic is equipped with 48 mm filling depth per compartment. Screws and rawl plugs for wall mounting are included.

Request for a quote

Germany

Verified by Europages

For controlled and steered bores, In limited space, for high precision requirements, For house service connections on sloping terrains, beneath stairs, walls etc., bores that can’t be established using a soil displacement hammer up to 50 m bore lengths, For bores directly out of the building, as the machine is able to be dismantled, For bores out of manholes from 1 m diameter on (PIT S), For a quick, clean and economic jobsite execution.

Request for a quote

Germany

Verified by Europages

Installation of new PE-100 RC pipes as a pipe string (long pipe) Pipe installation via a starting manhole from 1 m diameter Installation length up to 150 m New pipes OD 192, 242 and OD 292 Tight in pipe means only minimal cross-section loss and small annular space without filling The hydraulic capacity of the new pipe can be in-creased by using pipes with smooth interior lining House connections can be connected without the need for trenches

Request for a quote

Germany

Verified by Europages

GRP designs meet requirements for high mechanical stability and are also resistant to many chemicals and corrosion. They do not conduct electricity and are easy to assemble. We are always delighted to work on special projects for our customers. The task here was to design a special GRP crane platform with a stainless steel crane unit. This was developed and built by TC and is used to raise battery packs by approx. 1 m. The complete crane platform can be rolled manually to the respective place of use.

Request for a quote

Germany

Verified by Europages

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

Request for a quote

Germany

Verified by Europages

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

Request for a quote

Germany

Verified by Europages

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

Request for a quote

Germany

Verified by Europages

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

Request for a quote

Germany

Verified by Europages

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

Request for a quote

Germany

Verified by Europages

Due to the ever-increasing number of parcels that are shipped every day, the need for automated solutions for the shipping process is also growing. Fully automated labeling of shipping cartons is becoming increasingly relevant for logistics and e-commerce companies. With our fully automatic labeling system, you can print and apply your goods in just one step. Convince yourself of our MPERIA A-Series labeler in combination with the QuickTamp applicator. The advantages at a glance: - Labeling from above or from the side - Cartons of different heights thanks to integrated height gauge - Height differences of up to 1 m between consecutive packages - Conveying speeds of up to 80 m/min - Applicator arm made of carbon fiber - Stroke length of up to 1,170 mm - Simple and tool-free maintenance - Labels up to 176×240 mm format - No bulky protective housing required - Intuitive control software with touch display and remote function - Less than 1 m² footprint

Request for a quote

Do you sell or make similar products?

Sign up to europages and have your products listed

Add my business

Germany

Verified by Europages

The aluminium pressure die-cast protective shroud (F3: aluminium sand casting) fully shields the pedal at the top and sides while the wide base provides a high degree of stability. It reliably prevents accidental operation from above by falling objects or careless operation from the side. Due to its robust construction the protective shroud withstands a drop of 20 kg from a height of 1 m. The foot switch is uniquely designed to allow inclusion of additional equipment: — Emergency Stop button — Contactor on DIN rail as main power switch — Customized installations (e.g. light indicators)

Request for a quote

Germany

Verified by Europages

The CS-3000 neXt combines functionality with an appealing design. The wide range of components, the high strength of the system and the load capacity provide individual solutions. • Light-duty suspension system for lightweight control enclosures up to 80 kg with an extension arm length of 1 m • Modular system for rapid implementation of individual solutions • Maximum system length: 1.5 m • Compatible with the CS-3000 series • Panel couplings with VESA 75 and 100 • Smooth transitions from pipe to component

Request for a quote

Germany

Verified by Europages

Flowmeters especially for gases The VA 45 variable area flowmeters were designed to measure gases. They can be used, for example, in industrial ovens, forges and furnaces, and protective gas and heating systems. The standardized device design is available with various connections that conform to standards. The glass measuring cone, protected by a metal sleeve with a viewing glass, makes it easy to read the flow directly.

Request for a quote

Germany

Fire protection duct I120/E90, to DIN 4102 part 11 and part 12, including 12 x countersunk head screws and 3 x 1 m sealing strip.

Request for a quote

Germany

For universal outdoor use and permanent use on sites, IP 44. Stackable, robust plastic housing, splash-water protected. Sturdy metal carrying handle. Oil resistant rubber cable for permanent outside use. Cable length: 1 m Cable: H07RN-F 5G1,5 Plug: CEE 5-pin 400 V/16 A Socket: 3 x CEE 5-pin 400 V/16 A 3 x 230 V/ 16 A

Request for a quote

Germany

For applications in laboratory, medical and engineering, where limited space, monitoring fluid quality and costs play an important role, they provide an ideal, previously not achievable solution. Technical specifications • hose connector • accuracy ± 1 kg/m³ • reproducibility 0,1 kg/m³ • operating temperature 0°C to +70°C • measuring range density 500-1500 kg/m³ • measuring flow 1-6 l/min Accessoires • strainer • gas separator • plug

Request for a quote

Germany

DBS 2100 1 - 12 0,1 m raised

Request for a quote

Germany

DSS 200 N 1 - 12 0,2 m raised

Request for a quote

Germany

DSS 100 N 1 - 12 1,25 m raised

Request for a quote

Germany

DBS 2000 1 - 12 0,1 m recessed washable

Request for a quote

Germany

This sharp edge-tested lanyard (in accordance with EN 35´4:2010), which is equipped with an energy absorber (in line with EN 355:2002) and 2 carabiner hooks, is based on a robust kernmantle cable. It is available in three set lengths: 1 m, 1.5 m and 2 m. EN 354:2010 & EN 355:2002 Sharp edge-tested kernmantle cable (Ø 12 mm) Incl. 2 carabiners and energy absorber Lengths: 1 m, 1.5 m, 2 m The 1.5 m and 2 m models can also be supplied with a pipe hook

Request for a quote

Germany

This temporary guard rail system was specially designed for pitched and flat roofs and is simply hooked onto the gutter or parapet. Any force exerted on it is distributed through its special facade supports. This lightweight guard rail, which is made of high-quality aluminium material, weighs less than 10 kg per meter. EN 13374:2013, C Designed for temporary usage Also suitable for overhanging roofs ≤ 1 m Lightweight and easy to transport Can be easily adapted to fit your architecture

Request for a quote

Request for quotes

Create one request and get multiple quotes form verified suppliers.

  • Only relevant suppliers
  • Data privacy compliant
  • 100% free