Saws - Import export

Manual end notching saw to work the ends of aluminium or PVC profiles Use of saw blades Ø 400 mm vertical and horizontal Manual operation with slidable supporting table 2 x 3,0 KW, 400 V, 50 Hz Pneumatic profile clamps horizontal and vertical Material back fence adjustable 30° – 90° read out by scale Vertical saw blade adjustable manually by hand wheel 70° – 90° – 30° Max. Cutting range 135 x 135 mm

Variable notching possibilities for mullion and transom combinations, e.g. curtain walls, winter garden, sky lights and special designs Manual adjustment of the horizontal blade max. 20mm to the front to cut slots Notch variation: rectangle, one sided angular, two sided angular, three sided angular Notch dimensions: 185mm horizontal, and 210mm vertical at (90°) Profile dimensions: height maximum 280mm, width maximum 300mm Manual adjustment of saw blade height, positioning via mechanical digital display; electronic display optional Swivelling range vertical saw blade 30°-90°-30° (back/mid/front) positioning via mechanical digital display Swivelling range of both, horizontal and vertical saw blade, 30°-90°-30°, positioning by mechanical digital display Material fence on the table swivelled left / right 30°-90°-30°, positioning by scale Depth stop adjustable via hand wheel and slide, read out by mechanical digital display, manual clamping Semi-automatic precise and safe notching...

Variable notching possibilities for mullion and transom combinations, e.g. curtain walls, winter garden, sky lights and special designs. Notch variation: rectangle, one sided angular, two sided angular, 3 sided angular Notch dimensions: 210mm horizontal, 262 mm vertical (90°) Profile dimensions: height maximum 280mm, width maximum 320mm 4-axis adjustment of saw blades positioning via electronic control panel – Notch height – Swivel vertical blade – Swivel vertical and horizontal blade together – Material depth stop Power adjusted notch height – positioning via control panel 0 – 260 mm Power adjusted pivoting range saw blade vertical 90° – 60° + 30° (to front/to back) Power adjusted pivoting range horizontal + vertical saw blade 90° + 45° – 45° Pivoting range material fence on table manually left/right 30° – 90° – 45°, positioning by scale Depth stop power adjusted via control panel. Precise and safe notching due to the work piece is fixed on the table during the cut Hydro...

Drive 7,5 kW, S 6, 400 V, 50 Hz, R.P.M. of sawblade infinitely adjustable (2.000 – 3.500 R.P.M.) Sawblade Ø 500mm, smaller blades on request Cutting range max. 215 x 120mm (height x width) Hydro pneumatic saw blade feed, Speed infinitely adjustable, linearly under the tabletop from rear to front Material fence on the table for the cutting angle Feed length limited via 4 end switch horizontal profile clamping device on the feed and discharge side Cycle spray mist device Pusher Profile feed from right to left with ball screw and servo motor Feed length from 10 to 2500 mm Feed speed max. 250 mm / sec. Repeatability +/- 0.1 mm iincl. horizontal pneumatic clamping device Reversing possible, max. Stroke length 7,300 mm Siemens S7-300 with touch screen 10“

Fully automatic operation Motor 7,5 KW, S6, 400V / 50 Hz, 2850 R.P.M. For the use of saw blade Ø 550 mm Big cutting range Max cutting height up to 150 mm Max cutting width up to 270 mm 90° cuts Remaining piece from 75 mm Table separation before sawblade retracts powered ball screw spindle material feeder up to 600mm Feed length up to 600mm, Multiple movement of the feeder possible up to 9,9 m

High-Performance automatic circular saw for aluminium and non-ferrous heavy metal Fully automatic operation Use of TCT or solid carbide blades ø 250 mm Motor 7,5KW, 400 V, 50 Hz, infinitely adjustable Blade feeder hydropneumatic Material feeder with ball screw spindle and servo motor 2-axis NC control Simatic S7-300 with 7“ touch screen Cutting range: height up to 60 mm, width up to 140 mm Manual safety cover 2x Ø 100 mm swarf extraction connector Blade feeder pneumatic hydraulic controled vertical top to down Manual blade feed adjustment to optimize the feed length Pneumatic clamps horizontal left and right of the blade Diagnosis of errors, trouble shooting Pneumatic clamps vertical left of the blade Mist spray blade lubrication (filling level controlled) 1 l tank Parts slide (Option: conveying belt) Material feeder from 2 – 650 mm with ball screw spindle and servo motor Multiple material feed possible up to 3250 mm cutting length Vertical and horizontal clamps Reducer of...

zum Ablängen mit Gehrung links/rechts unter 45° von Aluminium- und Kunststoffprofilen zum Ausklinken unter 90° von Aluminium- und Kunststoffprofilen am Profilende präzise V-Schnitte und minimaler Verschnitt beim Einsatz als Doppelgehrungssäge 2 Sägeblätter Ø 550 mm Schnittbereich: Profilhöhe max. 220 mm, Schnitttiefe max. 125 mm, (ablängen) Schnittlänge max. 180 x 180 mm (ausklinken) Antrieb 2 x 3 kW, 400 V, 50 Hz, Drehzahl 2.800 U/min. Vorschub pneumatisch, mit hydraulischer Reglung Materialqueranschlag fest auf der Tischplatte zum Ablängen der Profile pneumatische Profilspannung 2 xl horizontal von hinten Dosiersprüheinrichtung mit 2 Düsen Bedienung über ein Kommandopult mit Zwei-Hand-Steuerung

High performance automatic circular saw for aluminum and non-ferrous metals Fully automatic operation Infinitely adjustable speed control of the saw blade engine Material and saw feeder movement through servo driven ball screw spindle 2 axis CNC control Siemens S7 with 7” touchscreen Cutting range: up to 205 mm height and up to 400 mm width Rest-piece length as short as 55 mm (depending on profile) Machine can use carbide (TCT) or PKD blades diameter 650 mm (smaller diameter upon request) Automatic kerf widening to reduce scratches Individually controllable clamping pressure Motorized material feed with servo driven ball screw Pneumatic material clamps individually adjustable Positioning of the vertical and horizontal clamps by hand-wheel Cut off lengths of up to 5000 mm are possible by reversing the material feed up to 5 times Floating material feed to reduce material abrasion Feeder length of 1000 mm Simple exchange of saw blade, accessible from the front Saw blade feed is...

zum Ablängen mit Gehrung links/rechts unter 45° von Aluminium- und Kunststoffprofilen präzise V-Schnitte und minimaler Verschnitt beim Einsatz als Doppelgehrungssäge Sägeblätter, Ø 400 mm, Schnittbereich Profile max. 95 mm breit, 125 mm hoch Antrieb 2 mal 3 kW, 380 V, 50 Hz, Drehzahl 2850 U/min. hohe Schnittgeschwindigkeit: 60 m/s Vorschub Hydro-pneum., stufenlos regelbar Materialqueranschlag fest auf der Tischplatte pneumatische Profilspannung 2 mal horizontal von hinten Dosiersprüheinrichtung mit 2 Düsen Bedienung über ein Kommandopult mit Zwei-Hand-Steuerung

0 – 300 mm adjustable pneumatic material feed and digital display Vertical hydraulic punching unit to the right of the saw blade Power 200 KN Punching tools according to profile shape Aluminium profile – finished Cut to length Vertical punching Up to 8 profiles in one operation cycle Cycle time from 13 s / 1,63 s each piece Layout of punching tools for multiple profiles Quick change punching tools according to the profile shape Pneumatic material feed 8 profiles at once Special shaped quick change support Clamps according to profile shape – changeable Hydraulic punching unit Power 200 KN, stroke 20 mm Cycle spray mist device for each die and for the saw blade

Double mitre saw with a fixed unit on the left and the other one movable. Automatic positioning of the movable unit. Electronic positioning of the cutting units on any angle within 22,5° and 135°. Realized with cutting lenght of 4000 mm (7650 mm with accessories), 5000 mm (9650 mm with accessories), 6000 mm (11650 mm with accessories). It is equipped with the system EC 700x. Electro-welded sheet base which has been designed in such a way to offer the maximum rigidity and use practicality. Frontal and straight blade feed with speed adjustments. Hydro-pneumatic blade feed. Wide cutting capacity by means of sawblades Ø 450 mm. Possibility to use a blade with a dia. 500 mm, only by eplacing the tool. Dynamic protection guards for a total covering of the cutting area. Mist spray lubrication tools (Venturi system). Pre-arranged to connect an exhaust extractor for swarfs. Pre-arranged to use a set of tanks to collect swarfs. Pre-arranged to connect a motorised belt conveyor.

Double mitre saw with a fixed unit on the left and the other one movable. Automatic positioning of the movable unit. Pneumatic tilting of the heads (90°, 45° or 22,5°). The intermediate degrees can be obtainedby manually setting mechanical stops. Realized with cutting lenght of 4000 mm (7650 mm with accessories), 5000 mm (9650 mm with accessories), 6000 mm (11650 mm with accessories). It is equipped with the system EC 609. Electro-welded sheet base which has been designed in such a way to offer the maximum rigidity and use practicality. Frontal and straight blade feed with speed adjustments. Hydro-pneumatic blade feed. Wide cutting capacity by means of sawblades Ø 450 mm. Possibility to use a blade with a dia. 500 mm, only by eplacing the tool. Dynamic protection guards for a total covering of the cutting area. Mist spray lubrication tools (Venturi system). Pre-arranged to connect an exhaust extractor for swarfs. Pre-arranged to use a set of tanks to collect swarfs. Pre-arranged...

Double mitre saw with a fixed unit on the left and the other one movable. Manual positioning of the movable unit. Pneumatic tilting of the heads (90°, 45° or 22,5°). The intermediate degrees can be obtainedby manually setting mechanical stops. Realized with cutting lenght of 4000 mm, 5000 mm, 6000 mm. It is equipped with the system EC 601. Electro-welded sheet base which has been designed in such a way to offer the maximum rigidity and use practicality. Frontal and straight blade feed with speed adjustments. Hydro-pneumatic blade feed. Wide cutting capacity by means of sawblades Ø 450 mm. Possibility to use a blade with a dia. 500 mm, only by eplacing the tool. Dynamic protection guards for a total covering of the cutting area. Mist spray lubrication tools (Venturi system). Pre-arranged to connect an exhaust extractor for swarfs. Pre-arranged to use a set of tanks to collect swarfs. Pre-arranged to connect a motorised belt conveyor.

A double head mitre saw with disappearing blades specifically studied for the tubular steel shapes. Automatic positioning of the movable unit. Electronic positioning of the cutting units on any angle within 45° and 135°. It is equipped with the system TS 690. Frontal and straight blade feed with speed adjustments. Hydro-pneumatic blade feed. Speed of rotation of the blades, variable by means of a frequency converter (inverter). Automatic shifting of the support plates of the profile once over the cutting cycle. Dynamic protection guards for a total covering of the cutting area. Blade lubrication cooling system with electric pump. Coolant liquid vat with extractable pump for vat cleaning. Cutting deepth stop device. Intermediate workpiece support automatically operating Mobile roller conveyor with pneumatic clamp for section support Compressed air treatment unit (filter/reducer/lubricator)