Welding - Import export

EWM welding consumables for MMA welding Welders can choose between different stick electrodes with different coating materials to work with: — unalloyed steels — low-alloy heat resistant steels — high alloy steels — Copper-based materials — Cladding

EWM welding consumables for MIG/MAG welding Welders can choose between different welding rods with different diameters and materials to work with: — unalloyed steels — low-alloy steels — high alloy steels — Nickel-based materials — aluminium alloys — Copper-based materials — Hardfacing

EWM welding consumables for MIG/MAG welding Welders can choose between different spool sizes with different wire diameters and materials to work with: — unalloyed steels — low-alloy steels — high ally steels — Nickel-based materials — aluminium alloys — Copper-based materials — Cladding

TIG inverter welding machine with high frequency start. Thanks to the modular structure, the machine can be retrofitted with an additional water block without using any tool. With the two available control variants (Smart 2.0 or Comfort 2.0), a variety of functions are available: — TIG Liftarc welding without HF — MMA pulsing — TIG pulsing (sec/kHz) up to maximum 15 kHz — TIG AC welding — TIG AC pulsing (sec/special) — Non-latched/latched operation — Adjustable up-slope and down-slope time — Adjustable gas pre- and post-flow time — MMA welding — Adjustable hot start current and hot start time — Adjustable Arcforce — Antistick function Available as DC and AC/DC variant with optional torch connection for standard start/stop welding torch or up/down torch.

Gas-cooled PM MIG/MAG-welding-torches, optional function torch with high-quality OLED graphic display. Available as PM 221 up to 250A, PM 301 up to 330A and PM 401 up to 450A — Secure hold thanks to rubber inserts in the grip — The flexible ball joint makes it comfortable to work with, even in difficult spots Highlights function torch: — Automatic LED lighting when welding torch is moved Display and adjustment directly from the workplace- — Welding current and wire feed speed — Voltage correction — Program and JOB selection — Welding process switching — Interferences and error messages — 2-/4-stroke — Choke — Welding processes (standard, pulse, coldArc, rootArc, forceArc) Also supports the Xnet welding management software: — Selection of the welding task according to the welding sequence plan — Component management

TIG welding torches, gas- or water-cooled from 150 A (gas-cooled) up to 400 A (water-cooled). — TIG welding torch with a highly flexible hose package — Ergonomic GRIP handle for a secure hold and ergonomic use — Excellent HF reliability — Ready to weld with tungsten electrode, gas nozzle and back cap

Gas-cooled MIG/MAG welding torch with ergonomic grip and ball joint, anti-kink spring on welding torch as well as on connection. Can be connected to all machines with standard Euro torch connector. Type-related standard consumables M6/M8. Available in 4 variants: UM 15 G – DC CO2 180 A at 60% \ DC M21 150 A at 60% UM 24 G – DC CO2 250 A at 60% \ DC M21 220 A at 60% UM 25 G – DC CO2 230 A at 60% \ DC M21 200 A at 60% UM 36 G – DC CO2 300 A at 60% \ DC M21 270 A at 60% Available each with 3 metre, 4 metre and 5 metre hose package.

— Degaussing of pipes and metal sheets — Automatic degaussing before welding — Dependable degaussing for better welding results through stable welding process without magnetic deflection, minimisation of finishing work — activgauss (10–250 A) – degaussing during welding: — Avoids moving up of magnetic field during the welding process in case of very long and strongly magnetised components — Portable and robust — Quick connection at the pipe by means of three load cables — Use at -25 °C to +40 °C with mains voltage tolerances of +/- 20% Advantages of degaussing: — No deflection of the arc by residual magnetism in the workpiece — Prevention of lack of fusion due to insufficient sidewall fusion — Minimisation of finishing work — Cost-efficient and high-quality results — Set: Degauss 600 degaussing machine, two 5-metre, 35 mm² load cables, one 20-metre, 35 mm² load cable, RT DGS1 remote control and 5-m connection cable

Maximum operating convenience, long service life and all pulse, standard and innovative welding processes optimised and included in the machine at no extra charge. The members of the Titan XQ family are taking a quantum leap in welding technology. Here, perfect weld seams are already pre-programmed for low- and highalloy steels and aluminium in all material thicknesses and all positions. Thanks to the many options and accessories for the Titan XQ puls series, you can put together your machine in the way that best suits you, your needs and your applications. An exceptionally long duty cycle of 100% at up to 350 A, for example, makes for effective working. Perfect welding becomes sustainable – 24 hours a day, 7 days a week.

— MIG/MAG pulse welding machine with optimised synergic characteristics for welding steel — Pulsed MIG/MAG welding, MIG/MAG welding, MMA welding and gouging — Significantly less spatter formation and therefore less finishing work thanks to the pulse function — Welding with solid wire and flux cored wire — Drive 4X Steel: Connection socket for electrode holder on the wire feeder as standard — Drive 4X Steel D200: Adjustment of the gas quantity directly on the wire feeder via the gas control valve as standard. — Factory-fit option: Extra gas valve for increased safety — Infinitely adjustable arc dynamics (choke effect) — Adjustable start and end-crater functions — Synergic or manual welding operation

— GMAW standard and pulsed welding — Synergic characteristics for steel, CrNi and aluminium — MMA welding and TIG liftarc welding — Perfect for welding self-shielding flux cored wires — Infinitely adjustable arc dynamics (choke effect) — Synergic or manual welding operation — Interval welding — Adjustable gas pre- and post-flow time — Portable, compact — Saves power through highly efficient performance — Robust casing suitable for construction site use — 4-roll drive for 0.8 mm and 1.0 mm steel wires — Easy, tool-free change of welding polarity — IP23 spray water protected — Wire spool diameter up to 200 mm/D200 — 3.5 m mains supply lead with 16 A shock-proof plug — Mains connection 230 V/16 A — High mains voltage tolerance +15%/-40% and therefore fully generator-compatible — Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355

Water-cooled MIG/MAG welding torch with ergonomic grip and ball joint, anti-kink spring on welding torch as well as on connection. Can be connected to all machines with standard Euro torch connector. Type-related standard consumables M6/M8 UM 240 W - DC CO2 300A at 100% \ DC M21 270A at 100% UM 401 W - DC CO2 400A at 100% \ DC M21 350A at 100% UM 501 W - DC CO2 500A at 100% \ DC M21 450A at 100% Available each with 3 metre, 4 metre and 5 metre hose package.

— Inverter welding machine, DC — Very light-weight, only 4,7 kg – housing made of aluminium and impact-resistant plastic — Portable, shoulder strap — MMA and TIG lift arc welding — Cellulose electrodes: 100% safe for vertical-down welding — Welding of stick electrodes up to 4 mm — Pulsed MMA welding: — Especially suitable for root welding — Outstanding gap bridging with no sagging of the root side — Fine-flaked weld surface with a TIG look for final passes — Less finishing work thanks to less spatter — Ideal for difficult electrodes — Less distortion thanks to controlled heat input — Pulsed TIG welding with up to 2 kHz — Connection capability for remote control — IP23 spray water protected — Arcforce, hot start, antistick — Energy efficient due to standby mode — 3.5 m mains lead with 16 A earthed plug — Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage

The Welding 4.0 quality management system ewm Xnet was specifically developed for the welding production and effectively supports all the employees involved in the welding process (welding coordinator, welder, production manager, manager, etc.). The services provided by ewm Xnet include, on the one hand, the monitoring and the documentation of all welding parameters from any number of networked welding machines. On the other hand, it creates and manages the welding documentation (WPQR, WPS, welding certificates) digitally and opens up numerous evaluation options. Additionally, the Xnet welding management system can take over the management of components including all the information associated with it, such as component identification via bar code, material consumption, welding parameters, etc. Thanks to the modular structure, the Xnet welding management system can be used in small, medium and large companies.

SCHMIDT Zerspanungstechnik is the partner of choice for demanding welding solutions SCHMIDT Zerspanungstechnik's modern machinery offers a variety of welding options for the manufacture and working of components and large machine parts. As a dependable specialist in the processing of large parts, we can weld work pieces with a unit weight of up to five tons and flexibly adjust to accommodate different needs, including heat treatment and documented testing procedures: Our qualified and experienced staff are at home with various different welding techniques, such as MIG/MAG, TIG and arc welding. On request, we can carry out hardfacing of work pieces and large parts and employ special welding methods as part of the contract manufacturing service. Do you have any special wishes or requirements? We also weld custom solutions and highly complex parts with the utmost precision - on time and for a reasonable price. Our welding workshop is certified according to DIN EN ISO 3834.

— Modular plasma/TIG welding machine with Comfort 2.0 P control — Plasma and TIG welding — Plasma and pulsed TIG welding — Plasma and pulsed TIG welding up to the kHz range allow a high welding speed with minimal heat input using a constricted arc — Plasma and TIG welding current adjustable in 0.1 A increments — Pilot arc current adjustable in 0.1 A increments between 2–15 A — The pilot arc current can be adjusted at four operating points during the welding process (beforehand, during, and following welding, as well as during pauses in welding) — Non-latched/latched operation — Spot welding/tack function (spotArc/spotmatic) — Spotmatic – reduce the time required for tacking by up to 50% (TIG only) — Adjustable up-slope and down-slope time — 3.5 m mains supply lead with 16 A shock-proof plug

Maximum operating convenience, long service life and all pulse, standard and innovative welding processes optimised and included in the machine at no extra charge. The members of the Titan XQ family are taking a quantum leap in welding technology. Here, perfect weld seams are already pre-programmed for low- and highalloy steels and aluminium in all material thicknesses and all positions. Thanks to the many options and accessories for the Titan XQ puls series, you can put together your machine in the way that best suits you, your needs and your applications. An exceptionally long duty cycle of 100% at up to 320 A, for example, makes for effective working. Perfect welding becomes sustainable – 24 hours a day, 7 days a week.

— Gas-cooled DC TIG inverter welding machine — TIG welding with high frequency starting — TIG lift arc welding without HF — MMA welding — MMA pulse welding and pulsed TIG welding up to 2 kHz — Reduced secondary current accessible using torch trigger — Adjustable up-slope/down-slope — Adjustable gas pre-flows/post-flows — Adjustable hot start current and hot start time — Adjustable Arcforce — Antistick function — Energy-saving thanks to high efficiency and standby function — Portable, including shoulder strap — 3.5 m mains supply lead with 16 A shock-proof plug — Mains connection 230 V/16 A — High mains voltage tolerance +15%/-40% and therefore fully generator-compatible — Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage

Fully automatic welding helmet with extra bright view in light state (shade level 2.5) — Exact compliance of the set shade level thanks to digital auto darkening filter — Higher safety and relief to the eyes thanks to shade level 2.5 in light state — Optional: Comfort lining to add to the headband — With true colour filter for a true colour view — Never before seen realistic colour perception thanks to new sensor technology — Adjustable arc recognition angle by means of sensor slider — Infinitely adjustable shade level control — Operating unit outside helmet — Grinding mode — Synergic or manual welding mode

Water-cooled PM MIG/MAG-welding-torches , optionally equipped with high-quality OLED graphic display. Available as PM 301 up to 330A, PM 451 up to 500A and PM 551 up to 650A. — Secure hold thanks to rubber inserts in the grip — The flexible ball joint makes it comfortable to work with, even in difficult spots Highlights of function torches: — Automatic LED lighting when welding torch is moved Display and adjustment directly from the workplace — Welding current and wire feed speed — Voltage correction — Program and JOB selection — Welding process switching 2-/4-stroke — Choke — Welding processes (standard, pulse, coldArc, rootArc, forceArc) Also supports the Xnet welding management software: — Selection of the welding task according to the welding sequence plan — Component management