Machines and equipment - Import export

The Mini Shaft Loader allows you to load short shafts. The loading is done automatically. Do you have remnants of long bar feeder and would you like to process them? Or do you want to load very short shafts automatically? The MSL is the ideal complement for the Multi-3000 to load short shafts. It has a multi-profile loading prism. So you can load round and hexagonal material and all this without changing channels. Special profiles are possible on request. Impact-free recharging thanks to the exclusive recharging cycle. The recharging cycle is based on the patented recharging mechanism of the Multi 3000. After fast and precise bar removal, the material is gently placed on the loading prism. The Mini Shaft Loader is connected to the bar feeder. This takes over the power supply and control of the loading system. The material is fed via the slide of the loading magazine.

ar feeder for special profiles wanted ? To extend the MULTI 3000 to the bar feeder for special profiles, the Uni-erector can be mounted optionally. It enables the erection of rectangular profiles and special profiles for further transport to connected machine tools. Thus a smooth reloading process is possible. By simply setting a parameter, the erector can be selected or deselected. This enables a quick changeover from round material to a special profile. By deactivating it, the bar loader can load round or hexagonal material as normal. While with activated parameter the bar feeder will load the special or rectangular profile while the reloader is erecting. The use of square material is also optionally possible. The erector consists of two opposite rollers. To erect the material, these rollers move together during reloading. When the bar is threaded into the machine tool, the rollers open again. The distance between the rollers can be easily adjusted.

SAMSYS offers Spindle Liner for draw tube diameters from 38mm to 100mm. The length of the reduction tube depends on the length of the draw tube, as well as the clamping device and the type of clamping cylinder. The reduction tube consists of a precision steel tube as support tube (1). In order to ensure optimum guidance, the rear (2) and the front (3) guide are adapted to the lathe. Mounting as well as dismounting can be done in a very short time with a few simple steps, as the reduction tube is only attached to the clamping cylinder with two screws. The POM bushings (4) can be flexibly adapted to the material diameter. Since you do not need to store a reduction tube for every diameter, you save valuable storage space. A Water pan extension (5) is also available as an option for safe covering and splash protection.

The AutoSAM 3.26 is an automatic bar feeder with hydrodynamic bar guidance. It is particularly suitable for connection to sliding headstock lathes (Swiss-Type). Its field of application is in small, medium and large series. Its big brother is the bar loading magazine AutoSAM 3.51. The bar feeder has a calibration-free material clamping which is carried out by collets. This saves time for material change due to the automatic centric positioning. Four clamping jaws ensure maximum hold while the collet is being pulled onto the bar. The Mitsubishi PLC control system with PC board ensures extreme process reliability and simplifies communication with the lathe. Compatible with almost all types of lathes. For example Citizen, Star, Nomura, Mazak, Okuma, DMG Mori, SMEC, Doosan, Nakamura, CMZ, Takamaz and many more.

The AutoSAM 3.51 is an automatic bar feeder with hydrodynamic bar guidance. Its field of application is in small, medium and large series. Just like its little brother, the Bar loading magazine AutoSAM 3.26, it is well suited for connection to sliding headstock lathes (Swiss type). The bar feeder has a calibration-free material clamping which is carried out by collets. This saves time for material change due to the automatic centric positioning. The Mitsubishi PLC control system with PC board ensures extreme process reliability and simplifies communication with the lathe. Compatible with almost all types of lathes. For example Citizen, Star, Nomura, Mazak, Okuma, DMG Mori, SMEC, Doosan, Nakamura, CMZ, Takamaz and many more. The loading magazine has a control panel with function display, which is used for the settings of the machine. Multilingual menu navigation and error messages are included as standard in the display.

The spindle extension SamSpindle, has been specially designed for the extension of lathe spindles. Together with the bar feeder Multi 3000 it forms a safe, clean and efficient solution. The SamSpindle operates oil and air free. There is no mechanical connection to the lathe. Only a minimum of moving parts and masses. These are: the rotating bar, the guide rings and the inner cage of the ball bearings. The guide rings mounted in the roller bearings keep the bars in the centre of the SamSpindle cartridge. Thanks to this technique, round or test bars can be rotated at high speed, ensuring remarkably smooth running. You can turn drawn, round or profile bars, with correct straightness, at the maximum spindle speed of the lathe. This allows us to guarantee workpieces with high precision. The SamSpindle spindle extension offers maximum safety. It does not allow access to parts in motion. The moving parts are all enclosed in the SamSpindle cartridge, which is closed by a safety nut.

The basis of short bar loader Multi 3000SL was developed in Switzerland. It was specially designed for turning machine types with a large distance between machine cover and spindle end. The bar feeder is supplied as standard with a Z-axis sliding unit to ensure free access to the Spindle Liner. This makes it easy to change the spindle insert tube. The Bar Loading Magazine is manufactured in Germany with first-class materials and components. The MULTI-3000SL guarantees long-term reliability. It impresses with its service and environmentally friendly design. It is also a fully electric and servo-controlled magazine. Due to the easy access to all parts it is extremely user-friendly. It is very simple to understand and therefore easy to operate. Due to the well thought-out design, set-up and changeover is possible within 2-5 minutes. The patented lifting mechanism guarantees an impact-free and fast loading cycle.

The short bar loading magazine Multi 3000 was developed in Switzerland. Manufactured in Germany with first-class materials and components. The MULTI-3000 guarantees long-term reliability. It impresses with its service and environmentally friendly design. It is also a fully electric and servo-controlled magazine. Easy access to all parts makes it extremely user-friendly. It is very simple to understand and therefore easy to operate. Set-up and changeover is possible within 2-5 minutes due to the well thought-out design. The patented lifting mechanism guarantees an impact-free and fast loading cycle. Further features are the smooth material feed, an optimal control and monitoring of the material feed, as well as the exact positioning of the bar without mechanical stop. Due to its design, the Multi 3000 does not require a shifting device to change the Spindle Liner. A shifting device is optionally available in X- and Z-axis and in different lengths.

The small bar feeder Samsys Smart impresses with its high performance in a very small space. The bar feeder is manufactured in Germany with first-class materials and components. The Samsys Smart guarantees long-term reliability. It impresses with its service and environmentally friendly design. It is an electro-pneumatic magazine. This means the feed is servo-controlled and the reloading mechanism is pneumatic. Due to the easy access to all parts it is extremely user-friendly. This makes it very simple to understand and easy to use. Set-up and changeover is possible within 2-5 minutes due to the well thought-out design. Further features are the smooth material feed, an optimal control and monitoring of the material feed, as well as the exact positioning of the bar without mechanical stop. Due to its design, the Samsys Smart requires very little floor space. A shifting unit to gain easy access to the reduction tube is standard in X-direction.

With the MiJET part cleaning system it is possible to keep workplaces clean and workpieces hygienically cleaned with the simplest technology. An electrical connection is not necessary. Only a compressed air connection is required to use the device. Application The actual task of the MiJET is to filter oily air. Chips of the work pieces accumulate in the container. Operators often tend to blow off finished workpieces into the machine. This quickly results in dirty working environments and poor air in the production hall. However, we avoid this by exhausting these fumes. Oils are trapped from the exhaust air and chips and coolants accumulate in the container.

With the MiJET part cleaning system it is possible to keep workplaces clean and workpieces hygienically cleaned with the simplest technology. An electrical connection is not necessary. Only a compressed air connection is required to use the device. Application The actual task of the MiJET is to filter oily air. Chips of the work pieces accumulate in the container. Operators often tend to blow off finished workpieces into the machine. This quickly results in dirty working environments and poor air in the production hall. However, we avoid this by exhausting these fumes. Oils are trapped from the exhaust air and chips and coolants accumulate in the container.

Design: CNS 18/10, heated basket dispenser thermostatically adjustable from 30° – 90 °C. Incl. handle and corner bumper. Mounted on 4 castors (2 lockable), diameter 125 mm.

Stainless steel, with folding door/s, 1 adjustable intermediate shelf. Digital adjustable from 30 – 85 °C.

Design: Stainless steel. Top plate surrounded on 3 sides by railing, usable as saucers storage. Circulating air heating at rear area. Temperature individually controllable by a hooded thermostat on rearside. Temperature preset by manufacturer at 60 °C. Capacity: approx. 60 cups.

Design: Stand, lamp shades and flexible arms optionally chromium plated or black-coloured. Lamps with two individual on-off-switches. E.-Connection: 230 V – 500 W. Incl. 2 x 250 Watt-infrared radiators, white light.

Plate warmer 2006/AT and 2008/AT, round, with acrylic-door. Stainless steel, with self-closing acrylic-door. Thermostatically adjustable from 30 – 85 °C. Capacity: 2006/AT: 30 - 40 plates / 2008/AT: 45 - 60 plates

With flexible edge extraction. Operation selectable: left, right or both sides. 2 sockets on each side – 2 x 230 V and 2 x 400 V. With consistently welded niche for two or three Multi-Line 65 devices (on-site). Mobile on 4 castors (2 lockable). Incl. front sided glass splash guard, extensions with cutouts on both sides and GN-insets. Vapors are extracted on three sides and passed through the patented ACS – circulating air system. High performance grease separators (100 % flame arresting) are installed in left and right side walls along with two removable grease collection trays. The substructure contains low-noise radial fans. Cleaning odors with patented plasma technology in combination with activated charcoal filters. The ACS meets the requirements of VDI 2052 and is TÜV-certified to DIN EN 60335. Furthermore all components meet DIN, VDE, GS and TÜV.

Design: Chrome nickel steel 18/10. With on-off switch and control lamp. E-Connection: 26046: 230 V – 0,6 kW. Thermostat fixed at max. 80 °C. 26053: 230 V – 0,5 kW. Continuously adjustable temperature control by thermostat.

Design: Casing chrome nickel steel 18/10. Continuously adjustable temperature control from 30 – 90 °C by loosely attached ther mostat, with casing. 2 x GN 1/1 and 3 x GN 1/1 seperately adjustable.

Design: Chrome nickel steel 18/10. Basin indirectly heated (heater underneath basin bottom). Thermostat loosely attached with built-in casing. Basin rim folded 15 mm down all around. With water supply, drain and overflow for steady connection and automatic water level control.

Design: CNS 18/10. Incl. handle and corner bumper. Mounted on 4 castors (2 lockable), diameter 125 mm. Unheated.

Design: CNS 18/10, heated / unheated, for plates and serving plates. Thermostatically adjustable from 30° – 90 °C. Mounted on 4 castors (2 lockable), diameter 125 mm. Incl. handle and corner bumper.

Hot or cold combined in one basin, optionally continously or separately controlled. Temperature variable from – 5 °C to +140 °C. With Self-Cooling-System (refrigerant R600a). Ready to plug-in or for central cooling system.

For flush built-in. Temperature fixed at 70 °C. Unheated basket dispenser open. Heatedbasket dispenser closed.

Design: CNS 18/10. For flush built-in. With platform and 8 guide rods. plattform 580 x 580 mm

Design: CNS 18/10, unheated dispenser, incl. handle and corner bumper. Mounted on 4 castors (2 lockable), diameter 125 mm. Platform 580 x 580 mm. Model FUS-U unheated, Model FUS-B heated.

Heated, for plates and menu plates. Design: Casing and base made of chrome nickel steel, chromium steel plattform. Ther mos tat and on-off switch loosely attached, with built-in casing for mounting into site facing. Thermostatically adjustable from 30 – 90 °C. Capillary tube length 1800 mm. Capacity: approx. 50 plates. E.-Connection: 230 V-0,4 kW. Thermostat-built-in casing 107 x 175 x 80 mm, cut-out measures for built-in casing 87 x 150 mm.

Unheated, open tray dispenser for flush built-in. Capacity approx. 50 trays.

Lamp shade made of aluminium, silver-coloured anodized, black, copper-black or white plastic laminated. Diameter 150 mm. With helix cable, continuously variable from 850 – 1700 mm. Including 250 W-infrared radiator white light. Rosette 100 mm, black. Casing with on-off switch.