Magnetic technology - Import export

With flexCoder technology, the MSAC200 can be flexibly adapted to the customer's design and provides precise absolute values with high installation tolerances at the same time. It is basically possible to adapt the encoder and the magnetic ring for precise fitting, for example in motors. An additional feature is the high reading distance ≤0.6 mm and axial tolerance of ±0.2 mm to facilitate the design of the overall system and enable use in dynamic applications. Customer-specific design. Integration into small installation space possible. Absolute resolution up to 21 bit. Repeatability 0.01°. Reading distance ≤0.6 mm. Interface BiSS C, SSI. Optional analog real-time signal output Sin/Cos 1 Vss. Industrial and medical applications e.g., motor feedback, handling automation and robotics.

Most compact actuator with high performance for automated positioning jobs Easy mounting, no additional coupling needed. Stainless steel 14 mm hollow shaft, glass fibre reinforced casing. Brushless 24 VDC motor with long service life. Solid absolute sensor, magnetic sensing technology. 2-line LCD for target and position value and operating keys. 2 LEDs for user guidance. Integrated RS485 or CANopen interface. Integrated positioning controller. M8 + M12 component mounting technology.

Bistable linear solenoid with permanent magnetic support in open frame technology. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request.

Compact dimensions, high power density. Easy mounting and commissioning. High flexibility, high protection category. Stainless steel 20 mm hollow shaft, robust housing. Brushless EC motor with a long service life. Solid absolute sensor, magnetic sensing technology. Integrated power and control electronics. Integrated Industrial-Ethernet-Fieldbus. Integrated positioning controller. M12 component mounting technology.

Ultra-compact and powerful actuator with hollow shaft, Industrial Ethernet interface and 5 Nm nominal torque for demanding, fully automated positioning jobs. Small dimensions, high power density. Easy mounting and commissioning. High flexibility, high protection category. Stainless steel 14 mm diam. hollow shaft, robust housing. Brushless EC motor with a long service life. Solid absolute sensor, magnetic sensing technology. Integrated power and control electronics. Integrated Industrial-Ethernet-Fieldbus. Integrated positioning controller. M12 component mounting technology.

Compact and powerful actuator for automated positioning jobs Easy mounting, no additional coupling needed. Stainless steel hollow shaft, glass fibre reinforced casing. Brushless 24 VDC motor with long service life. Solid absolute sensor, magnetic sensing technology. 2-line LCD for target and position value and operating keys. 2 LEDs for user guidance. Integrated RS485 or CANopen interface. Integrated positioning controller. M8 + M12 component mounting technology.

Industrial Ethernet Profile AG26 Fieldbus/IE: compact dimensions, high power density easy mounting and commissioning High flexibility, high protection category stainless steel 20 mm hollow shaft, robust housing Brushless EC motor with a long service life solid absolute sensor, magnetic sensing technology integrated power and control electronics integrated Industrial-Ethernet-Fieldbus Integrated positioning controller M12 component mounting technology

Industrial Ethernet Profile AG25 Fieldbus/IE: Small dimensions, high power density easy mounting and commissioning High flexibility, high protection category stainless steel 14 mm diam. hollow shaft, robust housing Brushless EC motor with a long service life solid absolute sensor, magnetic sensing technology integrated power and control electronics integrated Industrial-Ethernet-Fieldbus Integrated positioning controller M12 component mounting technology

Fieldbus Profile AG06 Fieldbus: easy mounting, no additional coupling needed stainless steel hollow shaft, glass fibre reinforced casing brushless 24 VDC motor with long service life solid absolute sensor, magnetic sensing technology 2-line LCD for target and position value and operating keys 2 LEDs for user guidance integrated RS485 or CANopen interface Integrated positioning controller M8 + M12 component mounting technology

Fieldbus Profile AG05 Fieldbus: easy mounting, no additional coupling needed stainless steel 14 mm hollow shaft, glass fibre reinforced casing brushless 24 VDC motor with long service life solid absolute sensor, magnetic sensing technology 2-line LCD for target and position value and operating keys 2 LEDs for user guidance integrated RS485 or CANopen interface Integrated positioning controller M8 + M12 component mounting technology

Bistable linear solenoid with permanent magnetic support in open frame technology. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. More information can be found in the download area.

WiTEC Performance is the perfect solution for the most precise and fastest machining of your sheet material! The Performance is the flagship solution of the WiTEC machine family. A machine concept based on a FEM optimized design, built using premier precision components, and equipped with linear magnet motor technology, the Performance is able to achieve the highest levels of precision and speed, up to 80m/min! Thanks to the combination of Wissner’s innovative and patented hold&press Technology and sophisticated Vacuum System, you can mill even the smallest parts all the way through the finishing cut-out! No need for any adhesive paper or foil, no need for leaving connector tabs, and no deburring or cleaning is necessary! The ready-finished parts will go directly from the machine table to the end customer!

FXL-R round magnetic chucks in square pole technology are especially suitable for use on the lathe and on rotary tables of machining centers. The frame construction of the FXL plate can be equipped with centering elements at the front on the clamping side as well as at the rear. All FXL magnetic chucks can be operated with FXL-C or FXL-CT control units.

FXL Magnetic Clamping TechnologyThe FXL square pole technology is the result of over 20 years of experience in magnetic clamping technology and combines solutions to the most common customer requirements in the highest quality design. Magnetic poles, fed by Alnico and NDFeB magnets, are anchored in a solid, super-stiff monobloc body by means of a tool steel insert with M8 internal thread. The back of the clamping plate remains flat and can be drilled in at all points - for example, for inserting a zero-point clamping system. For this purpose, the magnet system is coated with highperformance resin in a multi-stage process, which has a high mechanical strength and ensures absolute tightness and perfect electrical insulation. FXL magnetic clamping plates can be controlled with our FXL-C control units or with almost all control units from other leading manufacturers.

The Flo-Tronic Plus™ is based on a standard Flo-Meter™ with or without a manual flow control valve. It provides visual flow rate indication as required by NFPA as well as an analog output in direct relation to the flow rate. The Waukee new magnetic flow sensing technology is immune to problems associated with dirty oil. Ideal for customers who need to data log flow rates for compliance to NADCAP, AMS 2750D, or CQI 9. FEATURES • Meets NFPA requirements for visual indication of flow • Isolated 4-20mA current loop output • Over current and reverse polarity protection • Calibrated in our ISO/IEC17025-2005 Calibration Lab and traceable to NIST (National Institute of Standards and Technology) • Multipoint calibration • Simple Installation • Modbus/TCP communications • 1 Programmable relay out • Easily connects to any PLC or controller with differential or single ended analog inputs • Retrofittable to most existing Waukee Flo-Meters

The Valve-Tronic Plus™ is designed for use in highly demanding industrial applications that require accurate flow control and measurement. It can function as a stand-alone controller for basic applications or become an integral part of a process control system for automatic flow control. FEATURES • Large LCD displays actual flow rate, totalized flow, valve position, alarms, and diagnostic messages • Field programmable engineering units • Magnetic sensor technology immune to problems related with dirty oil • Configurable to control based on rate of flow or valve position for applications where the Process Variable (PV) is Dew-point, Carbon Potential, etc. • Standard Modbus TCP for easy integration with control systems • Manual actuation of value possible • Field calibration for null and span • Advanced polynomial calibration for high accuracy over the entire range of the meter • Built-in Web Server with remote access to device • Full PID setpoint control The VALVE-TRONIC Plus™...

Magnetic clamping technology from AMF: safe, reliable and efficient. This innovative technology is based on the force of the magnetic field. This opens up new possibilities that make all surfaces fully accessible for the machining of a workpiece even at constant tension.

The electropermanent battery lifting magnet SBs are top products from ASSFALG in the 200kg | 500kg | 950kg load range for flat material. Round material can be lifted with up to 50kg | 200kg | 400kg. They combine the advantages of permanent load lifting magnets with those from electro load lifting magnets. Through electrical impulses within seconds, the electropermanent battery lifting magnets SB200 | SB500 | SB950 from ASSFALG can be automatically or manually switched with the push of a button. Even though no electricity is present during the load transportation, the workpiece is clamped as securely as it would be with permanent load lifting magnets. Approximately 1,000 ON/OFF switch cycles are possible until the integrated batteries must be recharged through a simple power connection. The electropermanent battery lifting magnets SB200 | SB500 | SB950 can be used in single mode as well as on magnet traverses and is an interesting alternative for 3-shift operation.