Results for
ASSFALG GMBH
Germany
Whether while milling (rough and finish machining), drilling, sawing, welding or assembling, the EPM modules or module systems offer a large selection of clamping options, for example, to clamp during edge milling or deburring (without mechanical clamping equipment) or for the simple and quick fastening of workpieces during assembly. Workpieces can be easily and quickly fastened with the Triplemag magnet clamping elements. The Triplemag series has additional positioning magnets, ensuring a constant position on the machine table and which are separately switched. Through the use of pole extensions, any unevenness on the workpiece can be compensated for and a deformation of the workpiece can be prevented. Using pole extensions, plane-parallelism of up to 0.01 mm is possible on the workpiece. The processing runs without vibration and an even distribution of holding force is guaranteed throughout the entire ferrous clamping surface.
Request for a quoteASSFALG GMBH
Germany
Whether while milling (rough and finish machining), drilling, sawing, welding or assembling, the EPM modules or module systems offer a large selection of clamping options, for example, to clamp during edge milling or deburring (without mechanical clamping equipment) or for the simple and quick fastening of workpieces during assembly. Workpieces can be easily and quickly fastened with the Doublemag magnet clamping elements. Through the use of pole extensions, any unevenness on the workpiece can be compensated for and a deformation of the workpiece can be prevented. Using pole extensions, plane-parallelism of up to 0.01 mm is possible on the workpiece. The processing runs without vibration and an even distribution of holding force is guaranteed throughout the entire ferrous clamping surface. Several Doublemags can be combined to process large parts.
Request for a quoteASSFALG GMBH
Germany
The AR series was specifically designed for workpieces that do not have any level contact surfaces. They are only switched on or off with a short compressed air impulse. Workpieces with level, flat, round or irregular surfaces are transported without effort. Individual solutions with multiple parallel-controlled magnets simplify your lifting task or work process. The magnets are only switched on with a short compressed air impulse between 5 and 8 bar. They are low-maintenance and have very fast switch-on times. It is not just used in fully automatic systems, but rather also for the simples manual lifting processes.
Request for a quoteASSFALG GMBH
Germany
These Permamax permanent magnetic chucks from ASSFALG are suitable for heavy clamp-lifting processing. These Permamax permanent magnetic chucks can be used for milling, rotating and grinding. Considerable holding forces are still achieved on uneven and rough surfaces. They allow for universal clamping of small, medium and large workpieces of any thickness, however, they are best suitable for thick and large workpieces. A complete, wide transverse pole distribution (steel/brass) guarantees consistently high holding force over the entire width up to the longitudinal sides. These clamping plates can be activated through a hexagonal switch lever.
Request for a quoteASSFALG GMBH
Germany
These permanent magnetic clamping plates Permamax from ASSFALG are suitable for heavy clamp-lifting processing. These Permamax permanent magnetic clamping plates can be used for milling, drilling, grinding and slicing. Considerable holding forces are still achieved on uneven and rough surfaces. They allow for universal clamping of small, medium and large workpieces of any thickness, however, they are best suitable for thick and large workpieces. A complete, wide transverse pole distribution (steel/brass) guarantees consistently high holding force over the entire width up to the longitudinal sides. These clamping plates can be activated through a hexagonal switch lever.
Request for a quoteASSFALG GMBH
Germany
This highly accurate magnetic clamping plate is used for grinding work as well as for eroding. It allows for universal clamping of small, medium and large workpieces of any thickness, however, they are best suitable for thin and fine workpieces. The permanent Microfine magnetic clamping plate is preferably used if a flat and light construction is needed during grinding, eroding or milling. A complete, fine transverse pole distribution (steel/brass) guarantees a consistent holding force over the entire width up to the longitudinal sides. This clamping plate can be activated through a hexagonal switch lever.
Request for a quoteASSFALG GMBH
Germany
These magnets can be individually adjusted to different tasks. They are only switched on with a short compressed air impulse between 5 and 8 bar. They are low-maintenance and have very fast switch-on times. Individual solutions with multiple parallel-controlled magnets simplify your lifting task or work process. It is not just used in fully automatic systems, but rather also for the simples manual lifting processes.
Request for a quoteEMBRO GMBH
Germany
Where are magnetic field mats used? The coils currently manufactured by us are processed by our customers into so-called electromagnetic field mats. These mats are used in Pulsed Electromagnetic Field (PEMF) therapy. Many PEMF devices are suitable for private use at home. However, various health service providers including physical therapists as well as non-medical practitioners offer therapies based on magnetic fields. Why is our embroidery technology used for production? This technique creates circular-shaped structures that form the basis for a homogeneous flow/direction of the electric current. At the same time, the mechanical wire laying has an extremely high level of accuracy. The distances can also precisely be determined. How is the magnetic field created? Simply put, this is how electromagnetic fields are created: pulsating magnetic fields are generated by the electric current flowing through the wire. The more wire, the stronger the magnetic field.
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Our rubber caps are used as scratch protection especially on delicate surfaces. They can be used with our flat pot and decoration magnets in order to protect the surface. Moreover it lowers the noise when putting on the magnet.
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Our rubber caps are used as scratch protection especially on delicate surfaces. They can be used with our flat pot and decoration magnets in order to protect the surface. Moreover it lowers the noise when putting on the magnet.
Request for a quoteSIKO GMBH
Germany
A combination of the MSAC506 magnetic sensor and the MRAC506 magnetic ring forms a system for absolute angle measurement. The MSAC506 sensor has an SSI interface with a resolution of 12 Ö 16 bit. There is also an analogue output (1 VSS) with 64 periods for dynamic position tracking. The sensor has an LED for distance monitoring. Magnetic absolute encoder single-turn. Compact design. Resolution 12 … 16 bits. Additional analog Sin/Cos 1 VSS signals. Reading distance ≤1 mm
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Magnetic system with stainless steel body and strong neodymium magnet core. This series have a deeper magnetic force than the classic flat pot systems. Two milled surfaces on the perimeter allow to fix the system with a tool. The holding surface is over molded with a hard type of rubber (TPE) and protects the magnet from strikes. At the same time the rubber effects a noise absorption.
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
The magnet assembly can be clipped into the groove. It is freely movable or can be fixed by a threaded pin. The magnetic core is protected by a plastic cover and has a large magnet area in the groove. The magnetic system is lying nearly plan and has a closed, smooth adhesive surface which avoids scratches on the surface and the concentration of metal shavings. Alternative to the standard we also offer individual solutions: » Plastic housing in special colours » Temperature resistance up to 150°C
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
The systems offer better resistance to chemicals than normal steel galvanised flat pot magnets. The systems offer higher temperature resistance to chemicals than normal steel galvanised flat pot magnets.
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
The systems offer better resistance to chemicals than normal steel galvanised flat pot magnets. The systems offer higher temperature resistance to chemicals than normal steel galvanised flat pot magnets.
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
The systems offer better resistance to chemicals than normal steel galvanised flat pot magnets. The systems offer higher temperature resistance to chemicals than normal steel galvanised flat pot magnets.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
AVITEQ VIBRATIONSTECHNIK GMBH
Germany
AViTEQ Magnetic vibrators can be used very versatile. The advantages of magnetic vibrators match all designs of vibrating machines. For almost each case of application in the vibration feeder technology and over all industries magnetic vibrators are the favorite system, in particular if it depends on high dosing accuracy. Magnetic vibrators are made in Germany on a highest standard. Advantages and benefits easy and continuously adjustable during running conditions PAL System (protection for wrong amplitudes) available for 25/33/50/100 (30/40/60/120)Hz variants immediate start/stop after switching linear amplitude Reliable permanent use High level of performance with compact dimensions Wear-free, without rotating parts Efficiency (long operating cycles and service life) Newest state-of-the-art of production engineering Conformity with all EC Guidelines, which affect the drives available for explosion-endangered spaces (Ex) available for 60 Hz power systems and other mains voltages Temp
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
High resolution magnetic absolute linear encoder system for CNC machine tools with robust design. The read head is guided contactless without ball bearing Measuring lengths: 70mm - 3.770mm Accuracy: 3+3ML/1.000 µm(p-p) Max. Resolution: 5nm Max. Response speed: 200m/min Extremely robust against vibration and shock Insensitive to contamination such as oil, water, moisture and dust due to the magnetic operating principle Same thermal expansion behavior as steel or cast iron machine bed Compatible with serial protocols from Fanuc, Mitsubishi and Siemens Siemens DriveCliQ version is Functional Safety certified
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Complete set consisting of a magnetic wall mount and 5 SHERPA® A4 display panels. • Complete display panel set for wall applications • Wall mount with 5 SHERPA display panels in A4 format • Polypropylene display panels with coloured profile frame and low-reflection film suitable for scanners • Metal wall mount with magnetic back, can be fastened quickly and easily to metal surfaces such as shelves or machine frames • Practical pivot mechanism for simple replacement of the displays • 5-year warranty
Request for a quoteSCHMIDT ZERSPANUNGSTECHNIK GMBH
Germany
SCHMIDT Zerspanungstechnik uses state-of-the-art metal working machines to apply the finishing touches SCHMIDT Zerspanungstechnik's modern milling machines make it possible to custom-machine work pieces to extremely high precision during contract manufacturing work. Our machinery includes several universal machining centres and computer-controlled CNC milling machines; among them column, bed and gantry milling machines. 5-axis milling technology allows the machine to position and move the milling cutter at any angle to the workpiece which makes producing extremely complex 3D contours possible. In addition to this, our machines offers qualitative benefits in that almost all points to be machined can be reached without having to re-clamp the work piece. We also have fully controlled rotary index tables and indexing heads, and work with magnetic and vacuum clamping systems. We're able to machine work pieces of up to 10,000 mm in size.
Request for a quoteSCHMIDT ZERSPANUNGSTECHNIK
Germany
SCHMIDT Zerspanungstechnik uses state-of-the-art metal working machines to apply the finishing touches SCHMIDT Zerspanungstechnik's modern milling machines make it possible to custom-machine work pieces to extremely high precision during contract manufacturing work. Our machinery includes several universal machining centres and computer-controlled CNC milling machines; among them column, bed and gantry milling machines. 5-axis milling technology allows the machine to position and move the milling cutter at any angle to the workpiece which makes producing extremely complex 3D contours possible. In addition to this, our machines offers qualitative benefits in that almost all points to be machined can be reached without having to re-clamp the work piece. We also have fully controlled rotary index tables and indexing heads, and work with magnetic and vacuum clamping systems. We're able to machine work pieces of up to 10,000 mm in size.
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
The FX-HV Horizontal-Vertical System will meet with its diverse setting almost any need. Overall height and focus can be adjusted by plug pins. Likewise, the device also can be used for up to 20% of its rated load without engaging under pads.The support pins are positioned in a way so that standing blanks can be struck, which, for example, is often required on the saw. Likewise lying discs and sheets can be placed. For horizontal transport, the system has a lifting eye on the back. The steel structure is completely coated, and the stable FX Lifting magnet ensures maximum safety. Special dimensions are available on request.
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
The HGF Handgausmeter is an easy to use precision instrument. The superfine 1mm probe magnetic flux densities can be measured extremely close to the magnetic pole and in very narrow air gaps. The HGF can be switched between AC and DC magnetic fields as well as between units Gaus and Tesla. At the edge of the display the pending polarity N/S is in the mode "DC magnetic fields" constantly displayed, the "peak indicator" facilitates the search for magnetic surfaces for example, in tracking down unwanted residual magnetism. The package includes in addition to the meter, the 1mm transversal probe and the batteries and a protective case and a protective cap for the probe. Thus, HGF is also suitable for use in the service industry. Our technicians use it for testing of heavy lifting magnets and clamping systems.
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
FXE-TT telescopic trusses are equipped with electro-hydraulic telescopic arms and are suitable for handling sheets of 3-16m length. The system consists of fixed and movable crossbars, each equipped with two magnetic modules. The length of the truss can be adjusted individually via radio remote control. The magnetic system can be operated on the truss itself or on the radio remote control included in the delivery.
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
Pneumatically actuated magnetic gripper type PNEUMAG are pneumatic switchable bi-stable magnetic systems. Air pressure is only needed for switching. The magnet system is permanent and thus keeps safe even with pressure drop. PNEUMAG magnetic grippers enable thin, perforated or textured sheet metal parts (from 0,5mm) take and safe to transport what they recommended specifically for use in automatic and semi-automatic feeding systems as well as slings for robot grippers. PNEUMAG is the alternative to vacuum conveying systems. They were tested on a metal sheet St37 with smooth and clean surface. Note that depending on the application a safety factor of 2 or 3 has to be included.
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
Plate-spreading-magnets are used for separating of stacked iron and steel sheets. The sheet separators are laterally grown from the sheet stack, they magnetize the sheets with the same poles, which repel them from each other. Plate-spreading-magnets apply both in automated systems where plates with vacuum or transshipped are magnetic, and the manual work, where the gripping sheet is greatly facilitated by their help. Our Plate-spreading-magnets consist of a reinforced magnet system, which is installed in a stable sheet steel housing.
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
FX-WP lifting magnets are waterproof to 1.5m diving depth. The multi-sealed, super-strong permanent magnet system sits in a fully nickel-plated magnet body. It is a diver. FX lifting magnets in universal design convince by their wide field of application. The FX achieves good results with large air gaps as well as with thin flat and round materials with a compact design and low dead weight. The device is characterized by great robustness and a very good price/performance ratio.
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
Permanent Magnetic Circular Chuck Type RM, with reinforced ceramic magnet system can be used for clamping bulky and heavy workpieces. The magnetic force is infinitely variable, in the surface incorporated centering grooves facilitate alignment of the workpiece. In the rake face, a center hole can be introduced. Structure: — Ceramic magnet system, Aluminum body, — Max Pole pitch 5+8mm — Holding power 140N/cm² — Magnetic field height 8mm — Pole plate wearing limit 8mm — Switch travel MAG-ENT-MAG 500° Recommendation: Super Strong circular chuck for turning, also for rough parts
Request for a quoteResults for
Magnetic systems - Import exportNumber of results
56 ProductsCountries
Company type
Category