Results for
STRONG MAGNETS GMBH
Germany
1.Description Pot magnets with eyebolt, one of magnetic assemblies, is also called pot magnet. This product is made of small metal cup and disc neodymium magnet with nickel coating, as the corrosion resistance of NdFeB magnet is considered poor. These Neodymium magnets are sunken in to a steel shell meaning that the north pole is on the center of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them an incredible hold for their size. An added advantage of these magnets is that they are resistant to chipping or cracking following constant impact with a steel surface. However, they are not suitable for underwater applications. 2.Application Pot magnets with eyebolt are very versatile product for hanging most things, we can attach them to metal surface without marking, meanwhile we can easily remove the eyebolt, generally we can attract coins, other steel plates
Request for a quoteSIKO GMBH
Germany
Magnetic Sensor. Compact design of sensor and connector. To be connected to MA502 or MA506. Works with magnetic tape MB500/1, MR500, MBR500. Reading distance ≤2 mm.
Request for a quoteSIKO GMBH
Germany
Compact design of sensor and connector. To be connected to MA503/2 or MA504/1. Works with magnetic tape MB500/1, MR500, MBR500. Reading distance ≤2 mm.
Request for a quoteSIKO GMBH
Germany
Repeat accuracy max. ±1 μm. Output circuit sin/cos 1 VSS. Signal period 1000 μm (analog). Real-time signal processing. Works with MB100/1 magnetic tape.
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Magnets in different designs as a visual highlight on your memo board.
Request for a quoteAVITEQ VIBRATIONSTECHNIK GMBH
Germany
AViTEQ Vibrating table can be used both for compression and also for loosening bulk material. Typical applications are compacting of e.g. concrete mixes or the unstick/knock out of molds. There are two different approaches: The load to be vibrated, is set loosly on the table or firmly clamped to the vibrating device. Advantages & benefits variable, can be used for different tasks easy to regulate with magnetic vibrator Construction Compact design, with attached magnetic vibrator/s or unbalanced motors below the tabletop. Selection The sizing depends on: bulk material, such as bulk density, particle shape and internal friction the properties of the container, such as height, stiffness and sidewall Key figures length: up to 4,000 mm width: up to 2,000 mm payloads: up to 3,000 kg drive: magnetic vibrator, unbalanced motor, exciter
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
Based on the CDR030 bistable rotary solenoid, Kendrion offers a bistable shutter in the field of optical safety technology, which enables de-energized holding in both end positions. The end positions are held by the built-in permanent magnets. This makes the shutter design very energy-saving. The CDR030 shutter is also characterized by its high reliability and long service life of 20 million switching cycles. In addition, the shutter has a typical closing time of 20 ms.
Request for a quoteAVITEQ VIBRATIONSTECHNIK GMBH
Germany
AViTEQ Magnetic vibrators can be used very versatile. The advantages of magnetic vibrators match all designs of vibrating machines. For almost each case of application in the vibration feeder technology and over all industries magnetic vibrators are the favorite system, in particular if it depends on high dosing accuracy. Magnetic vibrators are made in Germany on a highest standard. Advantages and benefits easy and continuously adjustable during running conditions PAL System (protection for wrong amplitudes) available for 25/33/50/100 (30/40/60/120)Hz variants immediate start/stop after switching linear amplitude Reliable permanent use High level of performance with compact dimensions Wear-free, without rotating parts Efficiency (long operating cycles and service life) Newest state-of-the-art of production engineering Conformity with all EC Guidelines, which affect the drives available for explosion-endangered spaces (Ex) available for 60 Hz power systems and other mains voltages Temp
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
Holding magnet in round design for holding or clamping ferromagnetic workpieces. The DC-excited coil achieves a holding force of up to 30,000 N when energized. When the supply voltage is switched off, the workpiece to be held falls off. The holding solenoid is maintenance-free and are characterized by a low operating current at high holding forces. The holding solenoid is available in different sizes in round, flat or square design.
Request for a quoteDEMAG CRANES & COMPONENTS GMBH
Germany
Firm hold in any position Demag DBM battery magnets are the ideal solution wherever you need to transport magnetisable loads safely and efficiently. They can be used independently of a power supply and are therefore highly versatile. Whether used as stationary units with wall or slewing jib cranes or as mobile equipment with cranes or forklift trucks, Demag DBM battery magnets allow you to transport loads weighing up to 4 tons easily and safely from A to B. DBM battery magnet -Universal application -Compact design -High safety and reliability -High load capacity -Loads are always safely picked up -Automatic charging control Universal application -Outdoor operation also possible with IP43 enclosure (power source, charger and control elements combined into one unit) -Single metal sheets or plates can be separated from the load by flicking the toggle switch -High load capacities
Request for a quoteMICRO-EPSILON
Germany
The capaNCDT DT61x0/IP is an industrial-grade, capacitive sensor system for displacement, distance and position measurements. Consisting of a sensor, a sensor cable and a controller, the measuring system is ready for use without any on-site calibration. Due to its very good temperature stability, immunity to magnetic fields and robust design that is protected to IP68, the capaNCDT DT61x0/IP is used for industrial measurement tasks such as air gap measurement in generators and regulation of plant and machinery.
Request for a quoteINFICON GMBH
Germany
The INFICON Gemini Inverted Magnetron Vacuum Gauge is the workhorse for all vacuum measurement applications (pending). Gemini combines two sensor systems into one small device to measure from atmosphere to 1x10 – 9 mbar. The patented ultra-low magnetic stray field design opens up a whole new range of applications. A unique interchangeable dual chamber sensor unit avoids cleaning cycles and reduces maintenance, making Gemini the most robust and economical vacuum gauge of its kind. Gemini Cold Cathode and combination comes with fully integrated digital electronics, providing ultimate flexibility for system integration. Cold cathode and Pirani combination option provides seamless transition, reliability, practicality and flexibility across wide ranging applications. MPG500 series represents the latest Technology to act as direct replacement for Cold Cathode or Penning Transmitters of the PTR 90 / PTR 225 (analog Versions) series. Part-No Typ Part-No Typ 3MB0-006-000P MPG500 SS,...
Request for a quoteVKF RENZEL GMBH
Germany
The anti-reflective and self-adhesive C-pocket is ideal as a poster pocket for your posters and advertising media in A0 to A7 format. Use the C-pocket as an information display e.g. for your entrance, cash desk and sales area. Here you can publish hygiene regulations and information. For this purpose, insert self-created information in the selected size into the pocket yourself. The C-pocket can also be used in the store for price labelling purposes. The C-pocket owes its name to its simple shape. It offers protection against moisture, dust and dirt. The poster can be inserted quickly and easily from the side. Thanks to the fleece adhesive on the back, the information pocket adheres to all smooth surfaces and can be removed again without leaving any residue. As manufacturer we guarantee the quality of the product! We use UV-stabilised materials. Special sizes or printed poster covers are also produced for an additional surcharge. Designs with magnetic tape are possible.
Request for a quoteRUHRGETRIEBE KG
Germany
Compact single-stage worm geared motor with solid shaft. Different shaft positions are possible. Stock motors have 57W or 90W output power and a speed of 3000 rpm. An additional version with 93W and a speed of 3300 rpm is also available. The SN18 can be used wherever space is limited. It is widely used, for example, in door automation. Gearbox type: SN18 solid-shaft Motor type: 24V DC permanent magnet Mounting design: B3/B14 Ratios SN18 Solid Shaft: 2,5; 5; 7; 10; 12; 15; 18; 20; 24; 30; 38; 50; 55; 75; 100; Ratios SN18H Hollow shaft: 7; 15; 20; 30; 55; Protection class: IP40 /IP54 (Other protection classes on request) Additional data: — Motor and gear in ball bearing — worms hardened and ground — Worm wheels from special bronze For further information see product detail page.
Request for a quoteRUHRGETRIEBE KG
Germany
Compact single-stage gear with solid or hollow shaft combined with a 24V DC permanent magnet motor. Different shaft positions are possible. Stock motors have 28W or 54W output power and a speed of 3000 rpm. The SN15R / SN15HR comes as a 24V-BLDC with integrated operating and control electronics, overload protection and a 4-Q Pi Controller - 40W output power and a speed of 4000 rpm. Gearbox type: SN15 (solid-shaft) / SN15H (hollow-shaft) Motor type: 24V DC permanent magnet Mounting design: B3/B14 Transmission ratios: 3; 7; 10,5; 15; 21; 30; 40; 68 Protection class: IP40 (Other protection classes on request) Additional data: — Motor and gear in ball bearing — worms hardened and ground — Worm wheels from special bronze For further information see product detail page.
Request for a quoteFLUKE PROCESS INSTRUMENTS GMBH
Germany
Strong crimped plug/cable attachment Circular cable cross section to reduce kinking and twisting Various cable lengths available Types: MicroMag surface + air thermocouples Easy to place, ideal for difficult-to-access car body shell areas Encapsulated magnet design allows reliable direct use even on wet painted and e-coated substrates IRMAG surface thermocouple Designed to measure ferrous substrates in IR cure ovens Robust alternative to Adhesive Patch thermocouple, combines easy attachment and fast thermocouple response Magnetic surface + air thermocouples Magnet offset from sensor prevents heatsink effect PTFE handle for easy removal or repositioning PTFE-coated to prevent sticking Aluclamp surface thermocouple Clips onto the edge of an aluminum car hood or other nonferrous panel Allows measurement of surface temperature at center of panel Aluminum automotive thermocouples with a spring-loaded bobbin for use on aluminum car body shells
Request for a quoteKROHNE MESSTECHNIK GMBH
Germany
The BM26A-1000 is a magnetic level indicator (MLI) for basic liquid applications. The cost-effective level indicator is particularly suitable for continuous level measurement in water storage tanks, condensate receiver tanks as well as wash and surge tanks for fuels, lubricates, additives or similar chemicals. The level indicator features a rugged metallic design with the magnetic flaps housed in an IP68 rated, hermetically sealed glass tube. It provides a highly visible local level indication. There is absolutely no power supply needed. However, in applications with more advanced signal output requirements, the MLI can be easily equipped with optional reed switches or a reed-chain level transmitter providing analogue or digital output signals.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
FX lifting magnets in universal design convince by their wide field of application. The FX achieves good results with large air gaps as well as with thin flat and round materials with a compact design and low dead weight. The device is characterized by great robustness and a very good price/performance ratio. First choice for all users who want to move massive sheets and blocks.
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
FX-WP lifting magnets are waterproof to 1.5m diving depth. The multi-sealed, super-strong permanent magnet system sits in a fully nickel-plated magnet body. It is a diver. FX lifting magnets in universal design convince by their wide field of application. The FX achieves good results with large air gaps as well as with thin flat and round materials with a compact design and low dead weight. The device is characterized by great robustness and a very good price/performance ratio.
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
FXL Magnetic Clamping TechnologyThe FXL square pole technology is the result of over 20 years of experience in magnetic clamping technology and combines solutions to the most common customer requirements in the highest quality design. Magnetic poles, fed by Alnico and NDFeB magnets, are anchored in a solid, super-stiff monobloc body by means of a tool steel insert with M8 internal thread. The back of the clamping plate remains flat and can be drilled in at all points - for example, for inserting a zero-point clamping system. For this purpose, the magnet system is coated with highperformance resin in a multi-stage process, which has a high mechanical strength and ensures absolute tightness and perfect electrical insulation. FXL magnetic clamping plates can be controlled with our FXL-C control units or with almost all control units from other leading manufacturers.
Request for a quoteSTRONG MAGNETS GMBH
Germany
Neodymium ring magnet ais also known as tube magnet, a round disc magnet with a straight hole along the centre, the hole in centre ensures great versatility. Most ring magnet is with north and south poles on the flat circular surfaces (this is called as axial magnetisation). The few exception that is diametrically magnetised is specifically marked. Also, Multi pole ring magnet, even radially magnetized ring magnet, is more and more referred in this industry now. Ring magnet is being designed into a new generation of motors, generators, hydraulic cylinders, pumps & sensors, rotor shafts and more. What's more, it remains very popular in high end loud speakers and high intensity separators. We are ready to make a custom ring magnet for your application, welcome to contact us for a further communication.
Request for a quoteSTRONG MAGNETS GMBH
Germany
The magnetic Lifter /crane (magnetic hoist) uses high performance magnetic materials to make it smaller, lighter and more attractive. Unique magnetic circuit design, remanence is almost zero. The safety factor is high and the maximum pullout force is 3.5 times the rated lifting force. The handle switch is equipped with safety button, which can be operated by one hand and is convenient and safe. The bottom of the crane has a "V" groove design. The corresponding round steel and steel plate can be hoisted. No electricity, permanent magnetic force, safe use. It can be widely used in field operation, lifting and handling of steel, installation and handling of flat mechanical parts and various moulds. It is mainly used in the process of lifting, connecting, loading and unloading and handling of magnetic conductive materials of block, column and other parts. Especially for other lifting tools because of the inconvenience of fixed and laborious objects
Request for a quoteSTRONG MAGNETS GMBH
Germany
Produced by the powder metallurgical method with chemical composition of ND2Fe14B Very brittle and hard Poorest corrosion resistance of all commercial magnetic material High resistance to magnetic demagnetization Excellent cost to performance ratio Reasonable temperature stability Not suitable for application which exposed to high temperatures Earth permanent magnet (NdFeB) has the strongest magnetism nowadays.It does not only has high remanence, high coercivity, high energy product, and highfunctional, but also it can processed into a variety of sizes easily.Now, it is widely used in avigation, spaceflight, electron, electrical sound, electrical machinery, apparatus, meters, medical technology, and especially apply to develop highperformance, small and light replacements. Our factory produce and manufacture magnets according to customer's design on shape, dimension, grades, coatings etc.
Request for a quoteTAVRIDA ELECTRIC
Germany
Tavrida Electric manufactures small, compact vacuum interrupters with an extraordinarily long mechanical and electrical lifespan. A specially designed axial magnetic field distribution provides an even current density over the contact surface, substantially improving the vacuum interrupting performance. Vacuum interrupter contacts have unique design, based on the mixture of copper and chromium metals and various dopants, to ensure long electrical life of contacts, low contacts resistance and chopping current. The patented, supercompact actuator design allows the circuit breaker to be installed directly underneath each pole. The design is optimal in terms of reliability, dimensions, weight and ease of installation. A spring charged by the magnetic actuator during the closing of the circuit breaker ensures main contacts pressure is maintained. The spring is integrated in the actuator and does not require any maintenance during the circuit breaker's lifetime.
Request for a quoteTAVRIDA ELECTRIC
Germany
Air insulated switching module incorporates a Tavrida Electric vacuum circuit breaker with a per phase actuator, housed in a corrosion resistant tank. Six main circuit bushings, made from UVstable polymer, are covered with silicone rubber bushing boots. Each bushing has builtin current and voltage sensors for protection, measurement and indication purposes. The outdoor switching module is equipped with six, high voltage bushings with embedded current and voltage sensors. Current sensing is performed by Rogowski coil sensors. Capacitive sensors are used for voltage measurement in all six bushings. Tavrida Electric manufactures small vacuum interrupters with extremely long mechanical and electrical lifespans. A specially designed axial magnetic field distribution provides even current density over the contact surface and significantly improves the vacuum's interrupting performance.
Request for a quoteCL MACHINERY GMBH
Germany
Closure Systems International's HT6 Headset is a non-ratcheting style headset that incorporates the most advanced hysteresis technology. The HT6 headset is specifically designed for unique specialty applications that are very sensitive to torque variations. Improved Application Torque Consistency Unique magnet configuration provides constant static torque Preferred solution for: ✓ Closures without sidewall knurls ✓ Bottles without neck support rings ✓ Closures with induction seals Low Maintenance Cost 6,000 hours of maintenance-free operation No lubrication required during 6,000 hour scheduled maintenance interval Unique hub configuration eliminates need for daily / periodic lubrication Can be retrofitted to existing installations Headset Exchange and general overhauls available Durable Corrosion Resistant Design Enclosed magnetic system made from high grade stainless steel to prevent corrosion Fully washable Unmatched Technical Support / Application Expertise!
NORIS GROUP GMBH
Germany
Non-contacting multi-channel speed sensor with square wave output signal, stainless steel threaded tube, difference-hall-effect or inductive magnetic principle. Due to its design and its approvals especially suitable for shipbuilding industry. Robust housing: IP66/68 Excellent vibration and shock resistance Variable lengths, threads and electrical connections Optionally with two galvanically isolated output signals Optionally with additional status signal (e. g. direction of rotation detection) Approvals: ABS, BV, DNV-GL, LR
Request for a quoteNORIS GROUP GMBH
Germany
Non-contacting multi-channel speed sensor with square wave output signal, brass threaded tube, difference-hall-effect or inductive magnetic principle. Due to its design and its approvals especially suitable for shipbuilding industry. Robust housing: IP66/68 Excellent vibration and shock resistance Variable lengths, threads and electrical connections Optionally with two galvanically isolated output signals Optionally with additional status signal (e. g. direction of rotation detection) Approvals: ABS, BV, DNV-GL, LR
Request for a quoteSTI GROUP / STI - GUSTAV STABERNACK GMBH
Germany
This high-end folding box for cosmetics is fitted with magnets that allow easy opening and closing. The folding box has a lot of communication space because of the special construction and inside print.
Request for a quoteResults for
Magnetic design - Import exportNumber of results
31 ProductsCountries
Category