Load lifting equipment - Import export

LAWECO lift platforms are mainly used for rationally stacking and destacking wood up to a stack weight of 120 tons. Additional typical applications include overcoming height differences as well as rapid raising and lowering of individual pallets. In use with a two-floor magazine

The positioning drawbar has a gradual flexible range of +/- 60°. The adjustment occurs easily by loosening the hand brake. A wireless remote control can be installed directly on the handle to switch the magnets on and off. Other remote controls to control cranes are possible on request. All technical data can be found in the .pdf file.

Types available Type LH-I -suitable for 1 fork sleeve or crane -can be secured to prevent slipping -with rotating hook -load capacity 1000 kg Type LH-II -suitable for 2 fork sleeves (also for straddle stackers) -can be secured to prevent slipping for different breadth of forks -with rotating hook -different load capacities

-steel construction -fork sleeves for pick-up -also for straddle stackers secured by chain to prevent slipping -1 rotating hook -spray painted or hot-dip galvanized Types available -Type LA 1600/2400 rigid construction -Type LA 25 rigid construction , inclination 25°, with stirrups 100 mm ground leeway -Type LAT 25 inclination 25°, variable working height, can be fixed in each position, with stirrups 100 mm ground leeway

The electropermanent load lifting magnets from the EMPH series are suitable for the lifting and transportation of individual slabs and unprocessed blocks. These magnets are used to handle loads with a large air gap or with scaled surface. Only a 400V rated current must be provided to use these devices and they are then immediately ready for use. Through short electrical impulses within seconds, the EPMH from ASSFALG are automatically switched on or manually with the push of a button. No electricity flows during load transport and nevertheless, the workpiece is as securely clamped as with a permanent load lifting magnet. Through the impulse current control, the EPMH load lifting magnets do not use much energy. The effectiveness and efficiency can be seen on the one hand in the reduction of operating costs and on the other hand in a saving of time.

The EPMB electropermanent battery lifting magnets are considered the best load lifting magnet development in the past decades at ASSFALG. They combine the advantages of permanent load lifting magnets with those from electro load lifting magnets. Through electrical impulses within seconds, the EPMB from ASSFALG is automatically switched on or manually with the push of a button. No electricity flows during load transport and nevertheless, the workpiece is as securely clamped as with a permanent load lifting magnet. The electropermanent battery lifting magnet EPMB can be used in single mode as well as on magnet traverses and is an interesting alternative for 3-shift operation. With the tip function (inching), even stacked sheets can be separated starting with a thickness of 6 mm. All technical data can be found in the .pdf file.

The electropermanent battery lifting magnet SBs are top products from ASSFALG in the 200kg | 500kg | 950kg load range for flat material. Round material can be lifted with up to 50kg | 200kg | 400kg. They combine the advantages of permanent load lifting magnets with those from electro load lifting magnets. Through electrical impulses within seconds, the electropermanent battery lifting magnets SB200 | SB500 | SB950 from ASSFALG can be automatically or manually switched with the push of a button. Even though no electricity is present during the load transportation, the workpiece is clamped as securely as it would be with permanent load lifting magnets. Approximately 1,000 ON/OFF switch cycles are possible until the integrated batteries must be recharged through a simple power connection. The electropermanent battery lifting magnets SB200 | SB500 | SB950 can be used in single mode as well as on magnet traverses and is an interesting alternative for 3-shift operation.

The manually activated permanent load lifting magnets with flexible single or double hooks are ideal for the horizontal and vertical transportation of materials. A wide range of models of the Mlay lifting magnets are available with bearing loads between 90 kg and 1825 kg for different material thicknesses. The flat magnet field is another advantage when destacking sheets or workpieces. Replaceable pole shoes make individual solutions possible. They can transport, for example, angle profiles or round sticks with different dimensions.

The unmistakable advantages of the load lifting magnets Elift from Assfalg are economy and fast handling. The hand-operated permanent load lifting magnet is the perfect and fully developed solution for moving all ferromagnetic materials in an efficient, safe and reliable way. Usage during lifting and transportation includes a variety of flat and round workpieces, from pre-processed materials to raw material. A wide range of models of the Elift lifting magnets are available with bearing loads between 100 kg and 5000 kg for different material thicknesses. The Elift has become an irreplaceable helper in many areas of application. ASSFALG offers an additional ring eyelet for the Elift 300 and Elift 500 allowing vertical transportation. We would be happy to perform an annual safety inspection of your magnets. All technical data can be found in the .pdf file.

The electropermanent load lifting magnet traverses TBK4 and TBK6 with automatic telescopic arm allow the lifting and transportation of sheets in different sizes from 3m to 16m. The patented solid steel modules are more heat-resistant than comparable modules made with a plastic casting mass. Only a 400V rated current must be provided to use these devices and they are then immediately ready for use. Through short electrical impulses within seconds, the magnet traverses from ASSFALG are automatically switched on or manually with the push of a button. No electricity flows during load transport and nevertheless, the workpiece is as securely clamped as with a permanent load lifting magnet. With the tip function (inching), even stacked sheets can be separated starting with a thickness of 5 mm. Magnet modules that are not needed can be switched off with the multi-channel control. This means a large magnet traverse system can be securely used for the transportation of smaller sheets.

The EPM M electropermanent load lifting magnets are used where there is a frequent change of workpieces due to the very short switching times. Only a 230V rated current, depending on magnet with 230V or 400V, must be provided to use these devices and they are then immediately ready for use. Through electrical impulses within seconds, the EPMM from ASSFALG is automatically switched on or manually with the push of a button. No electricity flows during load transport and nevertheless, the workpiece is as securely clamped as with a permanent load lifting magnet. The electropermanent battery lifting magnet EPMM can be used in single mode as well as on magnet traverses and is an interesting alternative for 3-shift operation. With the tip function (inching), even stacked sheets can be separated starting with a thickness of 4 mm.

USED FOR HANDLING OF sheet steel in packs or single / slabs. Electro-permanent magnets; current is supplied to the coil only to activate or deactivate the magnet / a magnetized load may be held by the electromagnet as long as required / energy efficiency / high safety level / ease-of-operation / high level of operating efficiency

USED FOR HANDLING OF large diameter pipes. Specially designed for large diameter pipe lifting / copper coil as an option / hot material handling up to 650°C as an option

USED FOR HANDLING OF Sheet steel in coils / Sheet steel in coils, lifting from the lateral and end sides / -Rolled wire coils, rebar coils, from the end side Heat-resistant version (cargo temperature up to 650° degrees C). Aluminium coil

USED FOR HANDLING OF - bundles of coil, rod, rebar / rod and rebar in bundles. Specially designed for long-length cargo / copper coil as an option / hot material handling up to 650 C° as an option.

Electromagnets for slabs, sheet steel in packs or single pieces, rectangular metal blanks, tubes in packs.High reliability and durability of the winding / Stability of lifting parameters in the operating process / Special design is available for operation in underwater conditions / Heat-resistant version (cargo temperature up to 650°C). Compatible equipment: Cranes / Spreader beams. Aluminium coil

Transported cargo: Slabs / Forgings / Heavy-weight metal blanks. Compatible equipment: Cranes / Spreader beams. Energy saving as per ton of the transported cargo / Heat-resistant version (cargo temperature up to 650°C) / Aluminium coil

Ergonomic support for heavy duty hand tools. Facts: Freely rotating and swivelling safety hook for suspension, adjustable Housing and housing cover of high-strength chill-cast aluminum Cable drum of high-strength chill-cast aluminum Closed ball bearings on both sides High-strength, encapsulated special suspension spring High-strength steel cable Infinitely adjustable cable stop buffer Cable wedge allows infinite adjustment of cable length Screw-type spring hook for load suspension Patented freewheel protects against overrotation when the spring is released Infinitely variable load setting via endless screw

USED FOR HANDLING OF coils / rod and rebar in coils. Specially designed for eye vertical coil lifting / copper coil as an option / hot material handling up to 650°C as an option

- Stainless steel balancer - Rust-free materials - food grade grease - tool handling - tool positioning - meat processing industry - ergonomic tool support - made in germany

safety factor: 7:1, material 100 % polyester with special reinforcement – reduced elongation. Easy to handle, light weight and insensitive to heat, cold or moisture; temperature range: -40°C bis +100°C. For safe lifting of load