Linear technology - Import export

DryLin® R - Installation videos System selection & service life calculation DryLin® R - Introduction and technical information Special info on DryLin® R linear plain bearing L1 series drylin® igus® test method Liners and pressfit bearings Open and enclosed DryLin® R liners Linear Bearings Open, enclosed, split and self-aligning DryLin® R linear plain bearing Housing bearing Enclosed linear bearing, adjustable, split, in tandem design and as floating bearing DryLin® R housing bearing Flange housing Linear bearing with round or angular flange DryLin® R flange housing Carriage and linear housing Open or enclosed in several long designs DryLin® R carriage and linear housing Shaft end supports and shaft blocks Fixed and moving shaft end supports, shaft blocks in several designs DryLin® R shaft end supports and shaft blocks Shafts and supported shafts Shafts made of aluminum, steel and carbon fiber DryLin® shafts and supported shafts Linear round guide DryLin® R linear plain bearings are based on extremely wear-resistant polymers specially developed for the linear technology. The dimensions are compatible with standard ball bearings. The special geometry guarantees ruggedness even in extreme environments. DryLin® R - Installation videos Advantages: 100 % lubricant-free Dimensionally interchangeable with (recirculating) ball bearings Large variety of choice in housing shapes Shafts, shaft blocks and accessories available from stock 8 different shaft materials Replaceable liners VA stainless steel housing available When not to use it? When little installation space is available drylin® N drylin® W When twist-protection is required for single-axis systems DryLin® T DryLin® N Liners and pressfit bearings Open and enclosed DryLin® R liners Linear Bearings Open, enclosed, split and self-aligning DryLin® R linear plain bearing Housing bearing Enclosed linear bearing, adjustable, split, in tandem design and as floating bearing DryLin® R housing bearing Flange housing Linear bearing with round or angular flange DryLin® R flange housing Carriage and linear housing Open or enclosed in several long designs DryLin® R carriage and linear housing Shaft end supports and shaft blocks Fixed and moving shaft end supports, shaft blocks in several designs DryLin® R shaft end supports and shaft blocks Shafts and supported shafts Shafts made of aluminum, steel and carbon fiber DryLin® shafts and supported shafts

Rotoguide: Micro-jet technology with air bearings from ROTOGUIDE stands for ultimate accuracy, load-bearing capacity and robustness. Shafts and bearing parts are machined to ultra-high precision for a positioning accuracy within µm range. ROTOGUIDE units are especially suitable for highly accurate linear and rotational motion under ultra-high vacuum and for all processes with ultimate demands in terms of cleanliness and accuracy

Magnetic motor feedback systems are proving themselves in numerous applications in linear drive technology, handling systems, circuit board assembly, robotics and in a wide range of automation solutions in the context of Industry 4.0. In all of these areas, the speed and/or position of a drive must be communicated to a main controller in real time. The ultra compact LEC100 and LEC200 sensor duo has been developed by SIKO for these requirements. Repeat accuracy max. ±1 μm. max. resolution 0.2 µm (LD output circuit). Reading distance ≤0.2 mm. Works with MB100/1 magnetic tape. Signal period 1000 μm. Output circuit sin/cos or LD. Function and status display LEDs.

The versatile control unit for handling, assembly technology, linear robots The unipos 330 is a universal, modular CNC continuous path control for up to 3 axes (interpolating) in connection with a PLC for controlling most reliable applications for machine construction automation technology, machine tools and special applications. Depending on the design, either stepper motors or servomotors are used as axis drives. The integrated panel PC with the LINUX operating system allows convenient programming of your application and the user interface (HMI). Features Interpolating continuous path control for a maximum of 3 servo axes CNC programming using G code 1 to 3 axes / stepper motors or servomotors Processor: 32-bit microcontroller, 400 MHz, without fan 7" touch screen, resolution: 800 x 480 DPI, TFT colour

WiTEC Performance is the perfect solution for the most precise and fastest machining of your sheet material! The Performance is the flagship solution of the WiTEC machine family. A machine concept based on a FEM optimized design, built using premier precision components, and equipped with linear magnet motor technology, the Performance is able to achieve the highest levels of precision and speed, up to 80m/min! Thanks to the combination of Wissner’s innovative and patented hold&press Technology and sophisticated Vacuum System, you can mill even the smallest parts all the way through the finishing cut-out! No need for any adhesive paper or foil, no need for leaving connector tabs, and no deburring or cleaning is necessary! The ready-finished parts will go directly from the machine table to the end customer!

Electric linear actuators from IAI are available as rod, slider and slide table types as well as with toothed belt drive. They are equipped with a stepper motor or servo motor and often already have a battery-free absolute encoder as standard. On request, they can also be supplied without an electric drive unit. The product range of linear actuators consists of the RoboCylinder series, which are characterised by high user-friendliness, simple programming as well as compact design. Their focus is on covering common customer requirements and are therefore relatively inexpensive. Electric slider type actuators and axes with toothed belt drive from the IntelligentActuators product line complete the product portfolio. They meet higher requirements than RoboCylinders in terms of payload, speed, acceleration and precision.

Telescopic rail 27.2 x 20 mm, stainless steel, standard lengths up to 600 mm, load capacity up to 35 kg per pair Ball bearing over-extension Load capacity up to 35 kg per pair Standard rail length up to 600 mm Closed end stop Operating temperature up to +200°C Manufactured in the European Union For over 40 years, the Schock Group has been developing and manufacturing ball bearing telescopic rails for linear motion technology. The advantageous physical properties of ball bearing guidance form the basis for the performance of Schock telescopic rails: Smooth and quiet operation, even under high load High functional reliability Long service life without maintenance

Ball bearing full extension slides, extendable on both sides for a 100%+ extension length. Load capacity up to 12 kg per pair. Standard rail length 246 mm. Manufactured in the European Union. For over 40 years, the Schock Group has been developing and manufacturing ball bearing telescopic slides for linear motion technology. The advantageous physical properties of ball guidance form the basis for the performance of Schock telescopic slides: Smooth and quiet operation, even under high loads. High operational reliability. Long service life without maintenance. Standard items in the specified lengths are available in stock from our distribution partner SToxxparts GmbH, starting from a quantity of one piece. Custom solutions are available through Schock Metall on a project-specific basis. We look forward to receiving your project inquiry, including your annual requirements and anticipated start date for production.

Telescopic Rail 57.5 x 16 mm, Galvanized Steel, Standard Length 1100 mm, Load Capacity up to 70 kg per pair Full Extension Ball Bearing Guide Load Capacity up to 70 kg per pair Standard Rail Length 1100 mm Manufactured in the European Union The Schock Group has been developing and manufacturing ball-bearing telescopic rails for linear motion technology for over 40 years. The advantageous physical properties of ball bearing guides form the basis for the performance of Schock telescopic rails: Smooth and quiet operation, even under heavy load. High operational reliability Long lifespan without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH from stock, and they can be ordered from a quantity of one piece. Custom solutions are available from Schock Metall on a project-specific basis. We welcome your project inquiry, including your annual requirement and expected start date for production.

Telescopic Rail 45 x 12.7 mm, Galvanized Steel, Standard Lengths up to 600 mm, Load Capacity up to 40 kg per pair Full Extension Ball Bearing Guide Load Capacity up to 40 kg per pair Standard Rail Length up to 600 mm Separable Inner Rail The Schock Group has been developing and manufacturing ball-bearing telescopic rails for linear motion technology for over 40 years. The advantageous physical properties of ball bearing guides form the basis for the performance of Schock telescopic rails: Smooth and quiet operation, even under heavy load. High operational reliability Long lifespan without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH from stock, and they can be ordered from a quantity of one piece. Custom solutions are available from Schock Metall on a project-specific basis. We welcome your project inquiry, including your annual requirement and expected start date for production.

Ball bearing partial extension slides with a 70-80% extension length Load capacity up to 56 kg per pair Standard rail length up to 660 mm Separable inner rail Locking in the open position Closed end stop Manufactured in the European Union For over 40 years, the Schock Group has been developing and manufacturing ball bearing telescopic slides for linear motion technology. The advantageous physical properties of ball guidance form the basis for the performance of Schock telescopic slides: Smooth and quiet operation, even under high loads. High operational reliability Long service life without maintenance Standard items in the specified lengths are available in stock from our distribution partner SToxxparts GmbH, starting from a quantity of one piece. Custom solutions are available through Schock Metall on a project-specific basis. We look forward to receiving your project inquiry, including your annual requirements and anticipated start date for production.

Ball bearing full extension slides with a 100%+ extension length Load capacity up to 20 kg per pair Standard rail length up to 550 mm Manufactured in the European Union For over 40 years, the Schock Group has been developing and manufacturing ball bearing telescopic slides for linear motion technology. The advantageous physical properties of ball guidance form the basis for the performance of Schock telescopic slides: Smooth and quiet operation, even under high loads. High operational reliability Long service life without maintenance Standard items in the specified lengths are available in stock from our distribution partner SToxxparts GmbH, starting from a quantity of one piece. Custom solutions are available through Schock Metall on a project-specific basis. We look forward to receiving your project inquiry, including your annual requirements and anticipated start date for production.

SCHOCK has been a successful innovator and manufacturer of ball guides for linear motion technology for decades. SCHOCK ball guides are known for their precision, high load capacities, and long lifespan. Key features of SCHOCK ball guides include: Excellent running properties High operational reliability Long lifespan without maintenance Custom connection options Based on individual customer requirements, we develop and manufacture ball guides as runner guides, partial extension, full extension, or over-extension. In collaborative project planning with our customers, we define the product requirements for the ball guides. Our customers benefit from a wide selection of rail profiles, mounting systems, comfort features, and high-quality surface finishes, such as SCHOCK powder coating. We supply powder-coated ball guides in any desired RAL color, offering you unique design possibilities.

Ball Bearing Full Extension Slides - 100%+ Extension Series 036 with Locking Mechanism Ball bearing full extension 100%+ extension range Load capacity up to 67 kg per pair Standard rail length up to 750 mm Manufactured in the European Union For over 40 years, the Schock Group has been developing and manufacturing ball bearing telescopic slides for linear motion technology. The advantageous physical properties of ball bearing guidance form the basis for the performance of Schock telescopic slides: Smooth and quiet operation, even under high loads. High operational reliability Long service life without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH, starting from a quantity of one. Custom solutions are available from Schock Metall based on orders or projects. We look forward to receiving your project inquiry, including your annual requirements and expected serial start date.

Ball Bearing Guidance Full Extension 100% Travel Load Capacity up to 100 kg per Pair Standard Rail Length up to 750 mm Manufactured in the European Union For over 40 years, Schock Group has been developing and manufacturing ball-bearing telescopic slides for linear motion technology. The advantageous physical properties of ball bearing guidance form the basis for the performance of Schock telescopic slides: Smooth and quiet operation, even under high load. High operational reliability Long service life without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH from stock and can be ordered from quantities of one piece upwards. Custom solutions are available from Schock Metall based on project-specific or order-specific requirements. We look forward to receiving your project inquiry, including your annual demand and expected serial start date.

Ball Bearing Guidance Full Extension 100% Extension Range Load Capacity up to 50 kg per Pair Standard Rail Length 1500 mm Manufactured in the European Union For over 40 years, Schock Group has been developing and manufacturing ball-bearing telescopic slides for linear motion technology. The advantageous physical properties of ball bearing guidance form the basis for the performance of Schock telescopic slides: Smooth and quiet operation, even under high loads High operational reliability Long service life without maintenance Standard items in the specified lengths are available from our distribution partner, SToxxparts GmbH, in stock and starting from a quantity of one. Custom solutions are available from Schock Metall based on orders or projects. We look forward to receiving your project inquiry, including your annual requirement and expected serial start date.

These telescopic slides, featuring an over-extension design, are made from galvanized steel and are available in standard lengths of up to 550 mm. They have a load capacity of up to 60 kg per pair, making them suitable for various applications. Key Features: Material: Galvanized steel Type: Over-extension Load Capacity: Up to 60 kg per pair Standard Length: Up to 550 mm Soft Close: Yes, with a soft close mechanism over the last 50 mm of extension Manufactured in the European Union The Schock Group has over 40 years of experience in developing and manufacturing ball-bearing telescopic slides for linear motion technology. These slides are known for their smooth and quiet operation, even under heavy loads, ensuring both reliability and durability. Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH, with no minimum order quantity. Custom solutions can be provided by Schock Metall based on your specific project requirements.

Telescopic Slide 57.5 x 34 mm, Galvanized Steel, Standard Length up to 1200 mm, Load Capacity up to 150 kg per Pair Ball Bearing Full Extension, 100% Extension Load Capacity up to 150 kg per Pair Standard Slide Length up to 1200 mm Especially Suitable for Extra-Wide Drawers Manufactured in the European Union For over 40 years, the Schock Group has been developing and manufacturing ball-bearing telescopic slides for linear motion technology. The advantageous physical properties of the ball bearing system form the basis for the high performance of Schock telescopic slides: Smooth and quiet operation, even under high loads. High operational reliability Long service life without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH from stock and starting from a quantity of one. Custom solutions are available from Schock Metall on a project-specific basis.

Telescopic rail 17 x 10 mm, galvanized steel, standard lengths up to 374 mm, load capacity up to 10 kg per pair Ball bearing partial extension Load capacity up to 10 kg per pair Standard rail length up to 374 mm Double-sided pull-out Manufactured in the European Union For over 40 years, the Schock Group has been developing and manufacturing ball bearing telescopic rails for linear motion technology. The advantageous physical properties of ball bearing guidance form the basis for the performance of Schock telescopic rails: Smooth and quiet operation, even under high load High functional reliability Long service life without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH from stock and from a quantity of one. Custom solutions are available from Schock Metall based on orders or projects. We look forward to receiving your project inquiry with details of your annual requirements and your expected series start date.

Telescopic Slide 27.2 x 10 mm, Galvanized Steel, with Center Locking, Load Capacity up to 15 kg per Pair Ball bearing guided partial extension, extends on both sides 70-80% Load capacity up to 15 kg per pair Center locking in the closed position Manufactured in the European Union For over 40 years, the Schock Group has been developing and manufacturing ball bearing guided telescopic slides for linear motion technology. The advantageous physical properties of the ball bearing guidance form the basis for the performance of Schock telescopic slides: Smooth and quiet operation, even under high load. High operational reliability Long service life without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH from stock and can be ordered from a quantity of one piece.

Telescopic Rail 35.2 x 19 mm, Galvanized Steel, Standard Lengths up to 660 mm, Load Capacity up to 52 kg per Pair Ball Bearing Over-extension Load Capacity up to 52 kg per Pair Standard Rail Length up to 660 mm Separable Inner Rail Locking in Open Position Closed End Stop Manufactured in the European Union For over 40 years, Schock Group has been developing and manufacturing ball bearing telescopic rails for linear motion technology. The advantageous physical properties of ball bearing guides form the basis for the performance of Schock telescopic rails: Smooth and quiet operation, even under high loads. High functional reliability Long service life without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH in stock and from a quantity of one piece upwards.

Telescopic Rail 57.5 x 17.5 mm, galvanized steel, standard lengths up to 750 mm, load capacity up to 80 kg per pair. This telescopic rail from the Schock Group is designed for over-extension with a 100%+ extension range, making it ideal for applications where full access to the drawer or component is necessary. It is made from galvanized steel and offers a load capacity of up to 80 kg per pair, making it suitable for heavy-duty applications. Key Features: Telescopic Rail Type: Over-extension Material: Galvanized steel Standard Lengths: Up to 750 mm Load Capacity: Up to 80 kg per pair Locking Mechanism: Included Manufactured in the European Union Schock Group has over 40 years of experience in designing and manufacturing ball-bearing telescopic rails for linear motion technology. Their telescopic rails are known for their smooth and quiet operation, even under high loads, as well as their reliability and long service life without the need for maintenance.

Telescopic Rail 37.5 x 13 mm, Galvanized Steel, Standard Lengths up to 473 mm, Load Capacity up to 35 kg per pair Partial Extension Ball Bearing Guide with Double-Sided Extension (70-80%) Load Capacity up to 35 kg per pair Standard Rail Length up to 473 mm Manufactured in the European Union The Schock Group has been developing and manufacturing ball-bearing telescopic rails for linear motion technology for over 40 years. The advantageous physical properties of ball bearing guides form the basis for the performance of Schock telescopic rails: Smooth and quiet operation, even under heavy load. High operational reliability Long lifespan without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH from stock, and they can be ordered from a quantity of one piece. Custom solutions are available from Schock Metall on a project-specific basis. We welcome your project inquiry,

Telescopic Rail 53 x 19 mm, Stainless Steel, Standard Length 500 mm, Load Capacity up to 120 kg per pair Full Extension Ball Bearing Guide Load Capacity up to 120 kg per pair Standard Rail Length 500 mm The Schock Group has been developing and manufacturing ball-bearing telescopic rails for linear motion technology for over 40 years. The advantageous physical properties of ball bearing guides form the basis for the performance of Schock telescopic rails: Smooth and quiet operation, even under heavy load. High operational reliability Long lifespan without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH from stock, and they can be ordered from a quantity of one piece. Custom solutions are available from Schock Metall on a project-specific basis. We welcome your project inquiry, including your annual requirement and expected start date for production.

T Telescopic Rail 27.2 x 20 mm, Galvanized Steel, Standard Length 310 mm, Load Capacity up to 20 kg per pair Over-extension Ball Bearing Guide Load Capacity up to 20 kg per pair Standard Rail Length 310 mm With Locking Mechanism Manufactured in the European Union The Schock Group has been developing and manufacturing ball-bearing telescopic rails for linear motion technology for over 40 years. The advantageous physical properties of ball bearing guides form the basis for the performance of Schock telescopic rails: Smooth and quiet operation, even under heavy load. High operational reliability Long lifespan without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH from stock, and they can be ordered from a quantity of one piece. Custom solutions are available from Schock Metall on a project-specific basis. We welcome your project inquiry, including your annual requirement and expected start date for production.

Telescopic Rail 27.2 x 10 mm, Galvanized Steel, Standard Lengths up to 470 mm, Load Capacity up to 15 kg per pair Partial Extension Ball Bearing Guide Load Capacity up to 15 kg per pair Standard Rail Length up to 470 mm Manufactured in the European Union The Schock Group has been developing and manufacturing ball-bearing telescopic rails for linear motion technology for over 40 years. The advantageous physical properties of ball bearing guides form the basis for the performance of Schock telescopic rails: Smooth and quiet operation, even under heavy load. High operational reliability Long lifespan without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH from stock, and they can be ordered from a quantity of one piece. Custom solutions are available from Schock Metall on a project-specific basis. We welcome your project inquiry, including your annual requirement and expected start date for production.

With more than 10 years of experience acquired on our s191 model, the benchmark on the market, Bumotec launches the new series of s181, which combines the best of Swiss made knowhow and a high degree of innovation. With twin machining stations , a milling spindle capable to reach up to 40'000 rpm's and a high availability of tooling in the automatic tool magazine, Bumotec s181 has the capability to produce complex components from bar stock up to 32 mm diameter. The machine mineral casting bed, the latest CNC technology and the linear motor drives ensure uncompromised thermic stability and performances. Suitable for Watch, surgical instruments, medical implants and complex micromechanical components, the s181 is a major asset to help you to take on the actual and future industry challenges. Key features

The Bumotec s191V is the combination of proven Swiss made mechanics and stateoftheart CNC control and drive technology. With the CNC Bumotec s191V mill / turn center, precise and complex components can be produced via 5axis machining. Thanks to its stable mechanical concept and its linear drive technology, accuracies of just a few microns can be achieved. The integration of an individually adaptable automatic workpiece change unit, allows the machine to be used for one off prototypes or to run so called «unmanned shifts» without personnel. Many different configurations are available with three to five axes of machining capacity. The thermal stabilization unit almost eliminates warmup cycles when starting or after machining interruptions. Features Linear driven motors and directdriven rotation axis High speed spindles (maximum 40,000 rpm) Smart combination of turning and 5axis machining High thermal stability Automatic tool changer for 90 HSK40 tools

Exposed linear encoders are designed for use on machines and installations that require high accuracy of the measured value. Typical applications include: Measuring and production equipment in the semiconductor industry PCB assembly machines Ultra-precision machines High-accuracy machine tools Measuring machines and comparators, measuring microscopes, and other precision measuring devices Direct drives Our standard encoders are suitable for use in a low or medium vacuum. Encoders used for applications in a high or ultrahigh vacuum need to fulfill special requirements. Design and materials used have to be specially adapted for it. For more information, refer to the Technical Information document Linear Encoders for Vacuum Technology. The following exposed linear encoders are specially adapted for use in high and ultrahigh vacuum environments. • High vacuum: LIP 481 V and LIF 481 V • High vacuum: LIC 4113 V and LIC 4193 V • Ultrahigh vacuum: LIP 481 U