La via - Import export

If mobile phone reception is poor and there is a landline connection available, the automatic telephone dialler is a reliable alternative to fault message transmission by text message. Any fault messages are forwarded to different pre-programmed phone numbers. Product features For forwarding fault messages via the landline. Integrated microphone and control loudspeaker Voice messages to any number of recipients Digital message to one or more alarm receiving systems Remote query, remote control depending on device type Messages to pager or as text message depending on device type

M3 starter package, keypad operation via a cable connection

Connects PC and GMH 3xxx device Power supply via PC

For head or field installation Feed via current loop Impedance monitoring

In the field there is a frequent need to measure sensor readings rapidly and easily right at the sensor and to transfer them directly to a PC without additional amplifiers or converters. The 9206 USB sensor interface can satisfy this requirement admirably, thanks to its „plug & measure“ design. The USB connection means installation could not be simpler. Typical applications: —Mobile test measurements via laptop —Laboratory test set-ups —Instrumentation and control —Diagnostic measurements in the chemical industry —PC-based recording of expansion figures in bio engineering The USB sensor interface takes its supply from the connected PC via the USB port, and uses it to generate the power supply for the sensors. The initial settings and sensor settings are made by burster in-house and saved in the USB sensor interface. These can then be fine-tuned by the customer.

The xiB cameras stream images to the host computer via 4 lanes on a PCI Express Gen2 bus, boasting an impressive 20 Gbit/s of bandwidth. Together with minimal latencies the CPU load, the PCIe technology is ideal for high resolution CMOS sensors. The cameras are compactly housed in 60 x 60 x 38 mm, can be fully synchronized with their multiple GPIOs and offer an active Canon EF-Mount. All properties are extremely useful in multi-camera applications like 360 panoramas. In situations where multiple camera heads need to be placed in close proximity, system integrators can combine and aggregate the data streams from cameras with various resolutions via additional accessories.

Overpressure and vacuum possible - Different pressure and flow ranges possible - Several measuring ranges possible in one device - Modern operation via 5" touch graphic colour display - Completely remote controllable, optionally via ProfiNet

Measurement data via Ethernet For DASIM and SIQUAD systems Recording visualisation editing Export to a variety of formats

Driver for DASYLab Integration of DASIM/SIQUAD Parameterisation via DaSoft Version available for DASYLab 2016

S3 starter package, push-button operation via a cable connection or wireless RF connection.

The iBird® Pro Gold Edition can be networked with a smartphone, tablet or PC via an app! The app is available for Android and iOs devices. It can be connected to three devices at the same time. With a setting force of 20,000 N and the well-proven brushless motor, the iBird® Pro Gold Edition is powerful and fast when setting blind rivets up to Ø 6.4 mm in any material. The optional Autoreverse function additionally shortens the pulling process, ensuring the iBird® Pro is immediately ready for operation. The iBird® Pro Gold Edition is extremely simple to connect thanks to the QR code located on your tool. Simply scan the QR code with the GESIPA® app and the iBird® Pro Gold Edition will automatically connect to your device. The optional setting process assistant from GESIPA® helps operators to adjust the setting process and evaluate riveting processes. More details on delivery limits will be answered in a specific enquiry (details are only exemplary)!

With the software-based Big-LinX Edge Client any machine can be securely controlled and maintained remotely via a Windows-based HMI. The HMI serves as a remote maintenance access point without the need for additional hardware.

With the Dragonfly PoE (Power over Ethernet) module, amplifiers connected via a Dragonfly network switch can be powered via the network cable. •,Maximum output power of 150W to power up to 8 Dragonfly or 3 Hummingbird32 amplifiers. •,Less cabling required, as the power supply is ensured via the network cable.

713X \ 726X \ 745X – WITH ELECTRONICALLY CONTROLLED DRIVE & CONTROL VIA JOYSTICK – LITHIUM BATTERY – CHARGER – LINE LASER – ERGOPACK TOOL-LIFT – SEALING TOOL – CONTROL VIA INDUSTRY TOUCHSCREEN INTERESTED? WE WOULD BE HAPPY TO VISIT YOU AND CONFIGURE THE SYSTEM INDIVIDUALLY WITH YOU ON SITE. 700X WITH ELECTRONICALLY CONTROLLED DRIVE & CONTROL VIA JOYSTICK LITHIUM BATTERY CHARGER CONTROL VIA INDUSTRY TOUCHSCREEN

The electrical fine control valve makes it possible to adjust volume flows precisely via an input signal (4-20 mA) and to approach an exact spindle position. The valve can also be controlled by a 24V continuous voltage. Position feedback is implemented by a 4-20 mA output signal. With an additional adapter, the valve can also be connected via an RS-232 interface to a computer. The valves are available in 1/4" (10-200 l/h of water) and 1/2" (50-500 l/h of water).

The APG-process by HÜBERS permits short cycle times thanks to rapid gelation and demoulding with automatic opening and closing of the mould. During the gelling process, fresh material is supplied continuously to the mould under pressure in order to prevent cracks and voids and to compensate for the shrinkage of the material. The mould is held together by the clamping machine. The degassed material is injected into the APG mould directly from the static mixer. Shrinkage compensation is carried out by the HÜBERS metering pumps. One central mixing and metering system can serve several clamping machines. In this case each clamping machine has its own static mixer positioned directly in front of the mould and also has its own shrinkage compensation unit to maintain the pressure. The system is supplied via a ring line which requires no maintenance and is free of sedimentation. In principle the length of this line is insignificant.

The ESX-3IOS is a CAN-I/O module for the extension of the inputs/outputs of a master control unit via CAN. The communication with the master control unit takes place via CANopen, CANopen Safety, the STW protocol ECeS and J1939. The ESX-3IOS fulfills the safety requirements laid down in SIL 2 and PL d. For safe communication, the CANopen safety protocol and ECeS are supported. In addition to the Wake-up via terminal 15 / D+, Wake-up can also be carried out via CAN. Due to the robust aluminum die cast housing, a total current of up to 12 A can be implemented. The ESX-3IOS has over 16 inputs and 15 outputs.

The planning and development of our systems are always made according to customer requirements. Whether in combination with container, drying equipment, conveyors, pellet production, saw mills, particle board / furniture industry or in other areas of application. Conveying vertical Low rotational speeds Standard execution Low noise Planning according to the customer

Create and implement IoT and M2M applications fast with the PingPong Industrial Machinery Gateway of Round Solutions. It requires minimal configuration and is perfectly suitable for applications where wireless data transmission of industrial machines is needed. The gateway uses an integrated cellular module to send and receive data over the mobile network. PingPong is available with a 3G or 4G cellular module. With its Ethernet and RS485 interface, PingPong Industrial Machinery supports MODBUS over RS485 and TCP. It has a full duplex mode and a half duplex mode providing maximum flexibility for integration. PingPong has also two SIM slots, three antenna connectors for Mobile Network and GPS, a USB mini-B connector and many I/Os. Simply connect PingPong to any industrial machine, set up your application and send the data to your cloud. With Real Time Monitoring, data can be read and transmitted wirelessly for critical value alerting and downtime of machines can be reduced to a...

The 3/2way externally controlled valves are pneumatically or hydraulically operated valves with three connections and two switching positions. The control is carried out as standard via the attached 5/2way valve or via an existing valve terminal.

The 3/2way externally controlled valves are pneumatically or hydraulically operated valves with three connections and two switching positions. The control is carried out as standard via the attached 5/2way valve or via an existing valve terminal.

The 2/2way externally controlled valves are pneumatically or hydraulically operated valves with two connections and two switching positions. The control is carried out as standard via the attached 5/2way valve or via an existing valve terminal.

The 2/2way externally controlled valves are pneumatically or hydraulically operated valves with two connections and two switching positions. The control is carried out as standard via the attached 5/2way valve or via an existing valve terminal.

The 2/2way externally controlled valves are pneumatically or hydraulically operated valves with two connections and two switching positions. The control is carried out as standard via the attached 5/2way valve or via an existing valve terminal.

The 2/2way externally controlled valves are pneumatically or hydraulically operated valves with two connections and two switching positions. The control is carried out as standard via the attached 5/2way valve or via an existing valve terminal.

The CPCIserial-CAN/402-4-FD comes with two or four independent CAN FD interfaces via DSUB25 according to ISO 11898-1:2015. The CAN FD interfaces are driven by the ISO 16845:2004 certified esdACC (esd advanced CAN Core) implemented in the Altera FPGA. With a higher bit rate in the data phase in combination with the increase of efficiency by a higher number of user-data bytes, CAN FD offers a higher data throughput while maintaining the benefits of Classical CAN. The board is fully backwards compatible with CAN and can also be used in Classical CAN applications. The FPGA supports bus mastering (firstparty DMA) to transfer data to the host memory. This results in a reduction of overall latency on servicing I/O transactions in particular at higher data rates and a reduced host CPU load. Due to the usage of MSI (Message Signaled Interrupts) the CPCIserial-CAN/402-4-FD can be operated for example in Hypervisor environments.

The microCut model was specifically designed to meet the requirements of profile and creep-feed grinding applications. The modular column design offers a small footprint which can be easily configured into economical production cells frequently used in the turbine manufacturing industry. This machine is available in compact standard sizes but special designs with spindle power up to 52 kW are also available. The integration into production lines is achieved through automatic material handling and tool changers. A common solution to reduce non-productive time is to equip the microCut with an index table to allow loading and unloading during the machining cycle. For high-precision applications, dressing of the grinding wheel can be done on the table with a diamond roll dressing unit or via interpolation of feed and cross axes. For production grinding the overhead diamond roll dressing unit is used for CDCF or intermitten dressing.

Rotary Dialler Telephone for SIM-cards Our mobile phone is a fully functioning cell phone that we designed as an old-fashioned telephone from the 1960s era complete with purring dial and a coiled cord. Just put in your SIM card and enjoy the experience! Whether in the garden, in your caravan or when travelling - our mobile will always connect you in style. Technical Specifications works with any SIM-card no network lock classic rotary dial classic metal bell ringer more than 5 hours talk time more than 1 week standby supports tone-dial menu control can store local area code for fixed-line telephone behaviour saves up to 9 quick-dial numbers SMS not supported Package includes Opis 60s mobile telephone mains-powered charger & power supply telephone register manual Dimensions length: 23 cm width: 21 cm height: 13 cm weight: 1.0 kg