Temperature probes - Import export

Selection of probes based on Pt100/Pt1000, thermistors or thermocouples Platinum Temperature Sensor (Pt100/Pt1000) Platinum measuring resistors incorporate a Pt100 or Pt1000 sensor with 1/3 DIN accuracy. They are available in two-wire and also four-wire technique when power resistance needs to be compensated for. Platinum sensors can operate within the range of -50°C...+400°C while still maintaining high accuracy and long-term stability. Thermocouples Thermocouples are suitable for a broad temperature range between -25°C and +1100°C. They feature a fast response time and can be used for applications in hard to reach spaces or for rough, industrial applications. Thermistors Thermistors are sensors based on metal oxide semiconductors which produce a much larger change in signal when temperatur changes occur. Their operating range is -50°C...+150°C. They come in miniaturized design, helping their fast response time. Due to the thermistor's high resistance the effect of power...

The HMW90 Series Humidity and Temperature Transmitters are designed for demanding HVAC applications, where high accuracy, stability, and reliable operation are required. The flexible HMW90 series offers a variety of options and features. Transmitters include a display and a sliding cover with either an opening for the display or a solid front. Both analog and digital output options, including special scalings and calculated parameters, are available.

Low-Cost Humidity and Temperature Probe DKRF4050/DKRF4060 With the DKRF4050 and DKRF4060 Driesen+Kern GmbH well-priced instrument for humidity and temperature. With its G3/8” connection thread the compact cable probe (d=24.5mm, l=46mm) can easily be installed in plants and facilities. Alternatively, an extension for the probe is available with which the probe can be attached to a compression fitting. Two models are available: The DKRF4050 with 2 linear analogie outputs 0...1V/0...5V or 0...10V and the DKRF4060 with a CMOS-UART interface.

The DKRF415 humidity/temperature probe was specifically designed to work in areas with elevated pressure levels and in vacuum. The probe's operating range is 0...100% RH and it tolerates temporary condensation. It delivers accurate readings (up to +/-1.8RH / +/-0.3°C) even when working in compressed air up to 2 bar.

The DKRF417 humidity and temperature transducer ist the best choice for measurements at very high pressure levels. It is pressure-resistant up to 30 bar. Thanks to its small dimensions and M8 thread it is very well suited for applications within compressed air lines with small diameter. The probe’s operating range is 0...100% RH and it tolerates temporary condensation. It delivers highly accurate readings of up to 1.8%RH / 0.3°C. The DKRF417 humidity/temperature probe provides reliable readings even in challenging environmental conditions: · Compressed Air Systems · Engine Test Benches · Industrial Automation Technology We offer the compact, pressure-resistant transducer DKRF417 for relative humidity and temperature as well as the pressure-resistant humidity sensor EXT-D of the DKRF470 Series and the humidity and temperature Probe DKRF400.

The DK8040 is a robust and flexible stationary data logger for measuring climate parameters. The inputs can be configured for voltage signals and special sensors such as PT100 temperature probes, soil moisture and humidity sensors or condensation detectors. In additon, connection of sensors for rainfall and solar radiation is also possible. The logger comes in a robust, IP65 splash water protected housing which allows for measurements even under rough conditions, e. g. in the rain or snowfall.

Having a very low energy consumption the humidity loggers can be used for up to a few years without any battery change. While DCXP-RH8 is a 16 channel datalogger for humidity and temperature, whcih means up to 8 combined probes can be connected, the DCXP-RH16 has twice as much chenels ready to connect up to 16 combined humidity and temperature probes. For your application Driesen + Kern GmbH offers a range of probes: miniature probes (D=4mm, L=20mm) , Probes for pressurised pipes (DKRF374), Standard probes D=8mm und L=40/100mm (DKRF300) and many more.

Reasonably Priced and Precise The humidity / temperature probe DKRF400 was designed for applications where cost-efficient, flexible solutions and high accuracy are essential. The probe can operate within a range of 0...100%RH and offers an accuracy of +/-1.8%RH between 20...80%RH. Even in rough conditions beyond this range it provides accurate readings (see data sheet). Regardin temperature, the probe's accuracy is +/-0.3°C at 25°C. Two separate analog outputs each provide a linear signal of 0..1/0..5/0..10VDC or 4..20mA with an optional module. Miniaturized Design The DKRF400 probe distinguishes itself through its miniaturized and robust design. Its small dimensions (d=8mm, l=100mm) permit its use in a variety of applications The housing is made of stainless steel and can be equipped with cables of different sizes. Low Maintenance The probe features the miniaturized sensor SHT75DK which can be delivered as a fully calibrated spare part. The plug-in sensor can be exchanged...

Driesen+Kern GmbH series of datalogger for humidity and temperature HumiLog "rugged plus" are rugged and versatile loggers for a large varity of applications. There are many different model available: with integrated sensors as well as 2 additional sensor slots for external sensors, high temperature models as well as with additional integarted sensor i.e. barometric pressure and light. We offer a large variety of probes which can be connected to the datalogger for humidity and temperature. These are external humidity temperature probes, water detectors, bedewing sensors, soil moisture probes, precise temperature sensors and thermocouples. Furthermore, analogue signals can be logged as well: 0-1V/5V/10V/4-20mA , resistance, impulses, PT100/PT1000/thermistors. The loggers are IP65 protected and may be used even in harsh environments. All loggers may be used in a temperature range of -40 to +90°C- some of them even up to 150°C!. They have a memory capacity for 4 million readings,...

"rugged Plus" Datalogger with flexible inputs for voltage, current, resistance, pulse, strain gauge, temperature etc. "MultiLog rugged blue" datalogger models DK336 and DK337 datalogger for voltage and current and many more electrical parameters. They have two terminal block inputs to connect any type of electrical signal such as current, voltage, Pulse count, resistance, strain gauge. Furthermore you may use the loggers with temperature probes type PT100/PT1000/Termistor as well as Humidity and tmperature (digital probes). Both models are freely configurable, so you may select from a variety of ranges (0..1V/0..5V/0..10V oder 0...20mA....). You may configure engineering units to use them with any third-party device.

Driesen+Kern GmbH series of datalogger for humidity and temperature HumiLog "rugged plus" are rugged and versatile loggers for a large varity of applications. There are many different model available: with integrated sensors as well as 2 additional sensor slots for external sensors, high temperature models as well as with additional integarted sensor i.e. barometric pressure and light. We offer a large variety of probes which can be connected to the datalogger for humidity and temperature. These are external humidity temperature probes, water detectors, bedewing sensors, soil moisture probes, precise temperature sensors and thermocouples. Furthermore, analogue signals can be logged as well: 0-1V/5V/10V/4-20mA , resistance, impulses, PT100/PT1000/thermistors. The loggers are IP65 protected and may be used even in harsh environments. All loggers may be used in a temperature range of -40 to +90°C- some of them even up to 150°C!. They have a memory capacity for 4 million readings,...

Temperature loggers TempLog "rugged" by Driesen+Kern GmbH are extremely robust miniaturized data loggers for temperature. The DK310 incorporates an integrated temperaturesensor whereas the DK311 offers an connector socket for an external temperature sensor. Standard probes are reasonably priced air or surface probes, however a variety of other sensors are optionally available. The housing is made of high quality, shock-proof POM protecting the data logger even under rough conditions. The DK311 is protected against splash water according to IP65 - the DK310 complies even with IP68 and is thus fully submersible.