Inductance - Import export

The induction generator module is designed to supply up to 6 induction coils (inductors) with a power of up to 3 kW each. The device operates on the three-phase mains with a voltage of up to 400 V and a frequency of 50/60 Hz. The mains current is rectified and fed to the DC link, from which the inductors are individually supplied. The output power is controlled via the Kendrion controller of the modular industrial heating system. The setting range from 0% to 100% can be selected individually for each channel. By using state-of-the-art semiconductor switches, the output stages achieve high efficiencies, at working frequencies up to 25 kHz.

The controller is a fieldbus device for the control of up to 7 power modules from the modular heating System from Kendrion, which are directly connected via the module bus. In addition to system monitoring, the controller can also control or regulate the individual output channels of all power modules. Actual temperature values can be delivered directly via CAN fieldbus or provided by a higher-level controller e.g. a PLC. ; PROFINET Fieldbus interface; Independent control of up to 7 induction generators; System monitoring, temperature control; Integrated I/Os and CAN system bus

The induction generator is designed to supply up to 4 induction coils (inductors) with a power of up to 7.5 kW each. The device operates on the three-phase mains with a voltage of up to 400 V and a frequency of 50/60 Hz. The mains current is rectified and fed to the DC link, from which the inductors are individually supplied.

Surface mount inductors are used for heating processes in the food industry, in packaging machines or in embossing processes in the graphics industry. The material thickness of the heated tools can be reduced due to the surface energy input. This increases the dynamics of the process and saves energy.

Roller inductors are used in the production of synthetic fibres or in embossing processes in the graphics industry. Different roll diameters can be applied and one or more axial heating zones can be realised depending on the requirements. An essential advantage of the roller inductors is the contactless energy transfer to the rotating roller. ; Roller inductors from 60mm diameter; No slip rings required; Divided into independently controllable axial segments; Optimal temperature control & uniform heating; Emission-free heating

The controller is a fieldbus device for the control of up to 7 power modules from the modular heating System from Kendrion, which are directly connected via the module bus. In addition to system monitoring, the controller can also control or regulate the individual output channels of all power modules. Actual temperature values can be delivered directly via CAN fieldbus or provided by a higher-level controller e.g. a PLC.

The controller is a fieldbus device for the control of up to 7 power modules from the modular heating System from Kendrion, which are directly connected via the module bus. In addition to system monitoring, the controller can also control or regulate the individual output channels of all power modules. Actual temperature values can be delivered directly via CAN fieldbus or provided by a higher-level controller e.g. a PLC.

High temperature resistance - the special feature of the inductive proximity switches of this product family. The EGE high temperature proximity switches are based on the conventional inductive principle and switch when a metallic object moves close. Sensors are available for the most varied applications. Compact sensors up to 160°C, initiators with replaceable heads and remote electronics for applications in areas up to 250°C hot, large switching distances, solid metal sensors, initiators with analogue output and external analysis unit - these represent only a brief sample of this programme. Special sealing technology, materials and design result in high resistance and service life and thus high plant availability.

EGE amplifier for inductive proximity sensors complement the EGE sensors for extreme conditions from 200° C and the variants for -80° C. They are used for switching point adjustment and provide functional and output indications as well as the output signals. They also provide the 24 V DC power supply. The devices can be set up intuitively using a potentiometer. The analysis devices are suitable for top-hat rail assembly in a control cabinet. For 250° C-high temperature sensors a cable amplifier is available.

EGE amplifier for Ex proximity switches complement the intrinsically safe EGE sensors. They are used for switching point adjustment and provide functional and output indications as well as the output signals. They also provide the 30 V DC or 127 V AC or 230 V AC power supply. The devices can be set up intuitively using a potentiometer and have a cable break and short circuit monitoring feature. The NC/NO contact output functions can be adjusted. The analysis devices are intended for top-hat rail assembly in a control cabinet in the non-explosive area.

Inductive sensors with factor 1 switching distance for all metals with the same switching distance without reduction factor. Proximity sensors are based on the proven inductive principle - switches con tactless when metallic objects come close due to the inductive dampening of a resonant circuit. Factor 1 sensors are used where different metals from steel to aluminium should be detected. They are, for example, used for the occupation control of presses, where different metals are used all the time.

In addition to purely switching sensors, your sensor specialist EGE also offers you inductive proximity switches with analogue output for measuring tasks. The analogue signal is proportional to the approximation of the metal part. This sensor is also available in a version up to 160° C. The proximity sensor is based on the proven inductive principle: When metallic objects come close, the resonant circuit of a coil is dampened through induction and an analogue signal generated from it. Analogue inductive are e.g. suitable for the double occupation control of metal plates, for the tensioning control of wire or for monitoring metallic brake pads.

The EGE family of inductive standard sensors made in Germany covers inductive proximity switches in robust industrial design, sensors with adapted EMC stability for heightened requirements and sensors for high switching distances up to 160 mm and hysteresis for the detection of larger moving metal parts, such as pipes, profiles or plates. In addition, EGE offers standard thread designs and sensors with smooth sleeves. The proximity switches are based on the proven inductive principle and switch con tactless when a metallic object moves close. Proximity switches are used for presence verification, position and movement monitoring and the counting of objects as well as speed control on conveyor belts.

EGE inductive sensors for high mechanical loads still work trouble-free even after 10 impacts of 8 Joule. The sensor protected by a solid stainless steel sleeve is thus particularly resistant to shock and vibration. They are ideal for areas where standard sensors could be damaged mechanically. EGE offers variants resistant to high pressure cleaning with protection class IP 68/IP69 for use at temperatures up to 110° C and contamination-resistant sensors with PTFE coating. The proximity switches are based on the proven inductive principle and switch con tactless when a metallic object moves close. The sensors are particularly suited for heavy duty use, for example in metal processing, during welding and in mobile machinery.

Inductive proximity switches of this product family cope with the most difficult environmental influences found during offshore use. The proximity switches are based on the conventional inductive principle and switch when a metallic object moves close. Contactless positioning tasks in seawater environments or even below the sea level require special properties, such as a high IP class, high pressure and impact resistance and seawater resistance. These properties are achieved by, for example, using materials such as stainless steel 1.4571, longitudinally watertight and seawater-proof cables or even a one-piece stainless steel housing. Sensors of this series can be used at a water depth of up to 300 m.

Designed for extreme ambient conditions, the sensors of this EGE product family have been proven for more than 40 years in the most varied areas. The proximity switches are based on the conventional inductive principle and switch when a metallic object moves close. These inductive sensors cope without problems with constantly changing temperatures, flooding, vibration, cleaning processes using high pressure cleaners and temperature up to 120°C. These properties are, for example, in demand when used in the steel industry. Because our sensors are always flushed with rolling emulsion during operation, the chemical resistance of the materials used and a high IP class are also essential. They are also ideal for outdoor applications.

Sensors of the family IGEX22 for use in zone 22 with integrated electronics and direct switching output to the non-explosive area do not need a separate analysis device. This saves space and costs. The EGE IGEX20 proximity switches are based on the conventional inductive principle and switch when a metallic object moves close. This family includes shock and vibration resistant solid stainless steel sensors. The sensors are certified according to ATEX and IECEx. The sensors of this family are suited in the area of explosive dust atmospheres (zone 22) for presence verification, position and movement monitoring and the counting of metallic objects and the speed control on conveyor belts.