Machine tools - Import export

LG 164 is a compact, lightweight yet powerful reversible plate compactor developed for smaller jobs such as driveways and pathways, private house projects and narrow trenches. It is the ideal machine to use when macadam beds are thinner and you need nimble, responsive handling. The Hatz 1B20 diesel engine reduces fuel consumption and emissions, while quality components reduce vibrations.

THE large Cedima block saw for diamond discs up to Ø 1000 mm and a cutting depth of max. 425 mm. The lockable saw head is infinitely adjustable in height

It relieves both human and the environment, and also preserves the valuable cutting tool. The ability to cut close to walls is outstanding. Thanks to its electric drive, joint cutting in indoor spaces is also among the special strengths of the COMPACTCUT 401 E, which is also characterized by maneuverability, durability and outstanding operator ergonomics. Whether cutting asphalt, concrete, making separation cuts, demolition work, tight construction sites or joint cutting in buildings - the powerful electric joint cutter with a 400-volt motor delivers excellent results under all conditions.

LT 6005 is a well-balanced and powerful rammer, developed for efficient compaction of granular and cohesive soils such as clay and silt. Ideal for compaction in trenches or other narrow spaces, for example around pillars and pipes. Equipped with the latest Honda GXR120 engine, which is especially designed for rammers.

This powerful electrical drive is capable of handling up to 6.5 PS, making it the ideal choice for sawing concrete, stone, and masonry. The Coccodrillo 35 is safe to use in basements, rooms, and tight spaces, as it doesn't produce health-damaging exhaust fumes. It's easy to operate with a simple on-off switch and is electrically safe with PRCD protection. Additionally, the CARDI multi-function electronics provide soft start and overload protection, ensuring it complies with European and international regulations and standards.

With the K 4000 Cut-n-Break, you can cut up to 400 mm from one side. It is suitable for flush cutting close to walls and floors as well as for smaller jobs such as window openings. The power cord is routed under the handle, ensuring durability and uninterrupted operation. The one-piece inspection cover and Torx screws make both assembly and maintenance easier

It has an integrated water spray system that ensures optimal saw blade cooling and immediate disposal of sawdust. Due to the extremely efficient working system the water consumption is low and it complies with current safety standards. Also the saw is very robust because of its welded steel construction. The table pad with non-slip rubber coating is also manufactured with great care and combined with the precisely running, easy-to-use cutting table with adjustable angle stop precise cuts are guaranteed.

A maximum cutting depth of 125 mm in one cut or up to 250 mm when plunge cutting is offered by this table saw. Miter or bevel cuts up to 45° are easily possible and ensure optimal applicability. The robust single frame with integrated conduit channels provides high stability and a longer lifespan. It can be easily handled by one person due to the foldable legs.

Professional mobile band saw with robust construction, automatic band tensioning mechanism and precisely guided folding cutting table for cutting large-sized aerated concrete blocks. The saw can be easily set up and operated by one person and is characterized by extreme cutting precision. The maximum cutting height is 650 mm.

It efficiently grinds adhesives, paint, epoxy and spackle. With a grinding width of 280 mm it is suitable for small to medium concrete areas. 

The CTS-57 G is a table saw for quick and clean cutting of bricks, clinker, natural stone and similar materials.

The linear manipulation system is perfectly suited for detaching complex structures, such as windows, manholes, cut-thoughs and circular sections. With its high flexibility, it can easily adapt to conditions on-site. The simple assembly operation is performed by means of tensioning belts. The system’s adaptation to the internal diameter is possible.

The mini MACE is suited for, for example, the cutting and opening of pipe bombs, hand grenades or potentially hazardous objects such as unconventional explosive devices in the form of fire extinguishers and cases. mini MACE combines an abrasive mixing unit and a high-pressure pump in a single casing. The working pressure of the unit, which is driven by an internal combustion engine, is 6525 PSI (450 bar). The mini MACE was developed as a mobile penetration and cutting tool. An autarkic complete system equipped with internal combustion engine, abrasive mixing unit (AMU) and high pressure pump for accessing and deactivating IEDD (Improvised Explosive Device Disposal). It could be also used in the industrial sector for e.g. opening tanks.

Mobile water jet cutting unit particularly suited for Defusing large-caliber fund munitions EOD (Explosive Ordnance Disposal) & IEDD (Improvised Explosive Device Disposal). Environmental exposure over the time has chemical and/or physical effects on ammunition & often leads to a critical in-situ situation of the UXO. Conventional Render Safe Procedure (RSP) is very often not feasible without contacting or shifting the UXO and therefore is considered as not secure. In such situations repeatedly it came to severe accidents with death tolls. Hence safety of transport to carry-off for final removal is also not given.Therefore in such cases blasting the UXO is so far used as a final RSP causing partly heavy collateral damages. This unit allows to remove or deactivate the fuse remotely, risk-free & safe by using the WAS Technology & specially designed manipulation systems. The deployment of this technology around the globe has become state of the art today and is an accepted RSP world-wide

Facing new manufacturing challenges? Want to be quicker and more precise than your competitors? Then you need ConSus. The ConSus system is an Abrasive Mixing Unit (AMU) in which abrasive is added continuously to the pressurized water flow with the worldwide patented lock method. High capacity and low pressure have been unachievable in water jet cutting until now. That’s exactly what the Water Abrasive Suspension (WAS) cutting method from ANT delivers. Tests prove: The ANT suspension jet cuts two to three times faster than conventional water jet cutting methods and at less than half the pressure. The reason for this is the composition of the water jet - a suspension made of water and an abrasive, which is pressurised without air before being squeezed out of the nozzle. The omission of air allows the jet to cut much more efficiently. ConSus combines all of these benefits in a single unit, which can be integrated into any existing water jet cutting system.

AMU - Abrasive Mixing Units higher 700 bar. The AMU series was standardised for various industrial application ranges. Amongst these are the decommissioning and maintenance of offshore structures and plant in the petrochemical and nuclear technology industries. Also special applications, in the wind power industry or for structural or civil engineering are not uncommon. The unit designation always refers to the maximum working pressure and the gross capacity of the pressure vessel. In combination with a conventional high-pressure pump, the various pressure levels and nozzle diameters can be individually adjusted to the task in hand. Our cutting devices and equipment help to control the cutting processes with our water jet cutting systems (AMU higher 700 bar) from a large distance.

The Lapmaster Model 15 is a bench mounted unit ideal for engineering workshops, where flatness and finish are of prime importance. It is equipped with a 381mm diameter serrated cast iron lap plate intended for use with free abrasive compounds. The Lapmaster model 15 can be used to process a wide variety of materials including semiconductors, electro optics, ceramics, metals and other specialty products up to a diameter of 140mm. This popular bench mounted machine is also available in a pneumatic lift version.

These machines are capable of executing complex lapping routines while producing precise and repeatable results. These units, available for maximum component diameters of 51mm on the DL175, 114mm on the DL370, up to 170mm on the DL500, can lap a wide range of materials to very tight specifications. Excellent results have been obtained in the processing of a wide range of materials and components including glass, ceramics, crystals and ferrous materials. The Lapmaster line of Dual-Lap machines are based upon a two-way & three way planetary concept designed to yield very precise and repeatable results. Only the Inner and Outer Gears rotate allowing the carriers to move around the surface of the plates, whilst the top and bottom plate stay stationary. The larger DL500 and DL770 use a 3-way system, where the top plate, bottom plate and sun gear rotate.

The Lapmaster Model 48 is equipped with a 48 inch (1219mm) diameter lap plate. This is manufactured from Grade 300 grey cast iron to ISO 185(2005). It consists of individual segments bolted to a support plate. Outlets are provided to feed each conditioning ring via a track wire, with individual control valves. This system is designed so that a circulatory flow is established. The pump is capable of delivering far more compound to the outlets than is necessary. Excess compound is returned to the reservoir via a sloping drain tube. This together with the constant agitations provided by the stirrer minimises the tendency of the abrasive grains to settle out in the vehicle. The machine is intended for use with free abrasive compounds. A dispensing system, for use with water and diamond compounds etc., can also be fitted. Flatness of the machines lap plate, and consequently of the work, is controlled by adjusting the position of the conditioning rings relative to the lap plate track.

The Lapmaster Wolters Model 24 is the smallest floor standing lapping machine in the range and is ideal for engineering workshops, where flatness and finish are of prime importance. It is equipped with a 610mm diameter serrated lap plate, manufactured from Grade 300 grey cast iron to ISO 185(2005) as standard. Other plates can be supplied on request. The machine is self-contained and the rigid welded tubular section steel frame supports the reduction gearbox and drive motor and houses the abrasive compound system and the waste tank. Access to these is provided by lift off panels. The machine is intended for use with free abrasive compounds. A dispensing system, for use with water and diamond compounds etc., can also be fitted. Flatness of the machines lap plate, and consequently of the component, is controlled by adjusting the position of the conditioning rings relative to the lap plate track.

Our double-sided batch processing machine of the AC microLine® series meet the highest technological standards and requirements for fine grinding and honing. With the proven machines of the AC microLine® series, you can produce workpieces with unsurpassed precision down to the micrometer range. This gives you the optimum flatness, parallelism, surface quality and dimensional tolerance. The AC microLine® series offers the performance and process reliability you need to respond flexibly and economically to changing requirements - now and in the future. To increase throughput, manual as well as fully automatic standard handling systems can be optionally integrated into the basic machine; furthermore, we also realize customer-specific special solutions.

Our AC microLine® series double-sided batch processing machine meets the highest technological standards and requirements for lapping and polishing. With the proven machines of the AC microLine® series, you can produce workpieces with unsurpassed precision down to the micrometer range. This gives you the optimum flatness, parallelism, surface quality and dimensional tolerance. The AC microLine® series offers the necessary performance and process reliability to respond flexibly and economically to changing requirements - now and in the future. Furthermore, we also realize customer-specific special solutions.

Our double-sided batch processing machine of the AC microLine® series meet the highest technological standards and requirements for fine grinding and honing. With the proven machines of the AC microLine® series, you can produce workpieces with unsurpassed precision down to the micrometer range. This gives you the optimum flatness, parallelism, surface quality and dimensional tolerance. The AC microLine® series offers the performance and process reliability you need to respond flexibly and economically to changing requirements - now and in the future. To increase throughput, manual as well as fully automatic standard handling systems can be optionally integrated into the basic machine; furthermore, we also realize customer-specific special solutions.

Our double-sided batch processing machine of the AC microLine® series meet the highest technological standards and requirements for fine grinding and honing. With the proven machines of the AC microLine® series, you can produce workpieces with unsurpassed precision down to the micrometer range. This gives you the optimum flatness, parallelism, surface quality and dimensional tolerance. The AC microLine® series offers the performance and process reliability you need to respond flexibly and economically to changing requirements - now and in the future. To increase throughput, manual as well as fully automatic standard handling systems can be optionally integrated into the basic machine; furthermore, we also realize customer-specific special solutions.

The BGS product line consists of machines designed for the sharpening of flat and round broaching tools found mainly in the automotive and aerospace industries. Design and programming of the BGS is based on many years of manufacturing experience and knowledge of the tool industry. The BGS series signifies not only a machine concept but also a complete technological package consisting of machine and competence in the tool manufacturing arena. The machines of the BGS series are specifically designed for the sharpening process. The design concept with high dynamics and adapted grinding spindle allow the efficient and economic sharpening of broaching tools. An onboard measuring device probes the tooth root and cutting edge to determine the tooth pitch.

Our double-sided batch processing machine of the AC microLine® series meet the highest technological standards and requirements. Whether fine grinding and honing or lapping and polishing: With the proven machines of the AC microLine® series, you can produce workpieces with unsurpassed precision down to the micrometer range. This gives you optimum flatness, parallelism, surface quality and dimensional tolerance. The AC microLine® series offers the performance and process reliability you need to respond flexibly and economically to changing requirements - now and in the future. To increase throughput, manual as well as fully automatic standard handling systems can be optionally integrated into the basic machine; furthermore, we also realize customer-specific special solutions.

Our double-sided batch processing machine of the AC microLine® series meet the highest technological standards and requirements. Whether fine grinding and honing or lapping and polishing: With the proven machines of the AC microLine® series, you can produce workpieces with unsurpassed precision down to the micrometer range. This gives you optimum flatness, parallelism, surface quality and dimensional tolerance. The AC microLine® series offers the performance and process reliability you need to respond flexibly and economically to changing requirements - now and in the future. To increase throughput, manual as well as fully automatic standard handling systems can be optionally integrated into the basic machine; furthermore, we also realize customer-specific special solutions.

Our double-sided batch processing machine of the AC microLine® series meet the highest technological standards and requirements. Whether fine grinding and honing or lapping and polishing: With the proven machines of the AC microLine® series, you can produce workpieces with unsurpassed precision down to the micrometer range. This gives you optimum flatness, parallelism, surface quality and dimensional tolerance. The AC microLine® series offers the performance and process reliability you need to respond flexibly and economically to changing requirements - now and in the future. To increase throughput, manual as well as fully automatic standard handling systems can be optionally integrated into the basic machine; furthermore, we also realize customer-specific special solutions.

The mono-base design of the multiLine models allows grinding widths (Z-axis) of up to 900 mm. The compact, steel base designed multiLine model is equipped with linear guides in all three axes. The feed axes Y and Z are driven via servo motors and ball screws. For machines up to 2,000 mm the table is driven via ball screw (KGT). For longer tables up to 6,000 mm a linear motor (LIM) is used. The standard version of the multiLine comes with high-precision linear scales for positioning of the vertical axis. The direct drive grinding spindle with up to 37 kW guarantees optimal torque transfer. To meet your requirements this model can easily be customized through a large variety of available options like different types of overhead and table mounted dressing units for using Al-oxide or CBN/diamond grinding wheels.