Interiors coating - Import export

Special and flame retardant Just like ICS, ICS-ETFE is also suitable for coating stainless steel process and utility pipework, for example. As a special, flame-resistant interior coating, this is particularily suitable for the coating of exhaust air pipework, for example, in factories in the chip, solar cell and fibre optics industries. ICS is FM-approved - each construction part is marked separately with the FM specification. This coating is also tested according to the American safety standard Factory Mutual Research 4910 and suitable for use in clean rooms.

For the best only the highest quality ICS-ETFE is used for coating stainless steel process and utility pipework, for example. As a special, flame-resistant interior coating, this is particularily suitable for the coating of exhaust air pipework, for example, in factories in the chip, solar cell and fibre optics industries. ICS is FM-approved – each construction part is marked separately with the FM specification. This coating is also tested according to the American safety standard Factory Mutual Research 4910 and suitable for use in clean rooms. The coatings are used, amongst other things, in the chemical industry, the electrical industry, the automobile industry as well as in the food industry and in semiconductor technology. ETFE coatings are particularly well suited for use in the semiconductor and pharmaceutical industry. ETFE resists the most extreme conditions, such as e.g. the processing of high-purity grade water (molecules can still be extracted by this even from...

The compact 3RD4-EC dispenser from ViscoTec ensures an even and reliable product supply of viscous, structure-sensitive and solids-laden products. Absolutely precise, uniform and reliable dosing of various media, such as adhesive dosing or sealant dosing, thanks to the special rotor-stator geometry. Alternating opening chambers ensure gentle product transport and pulsation-free output. Your advantages: - interior non-stick coated - no dripping or thread pulling due to programmable retraction - direct linearity between spread rate and speed - constant dosing volume even with fluctuations in density, viscosity and temperature - reliable dosing without heating the medium - long service life due to media-specific component selection - easy cleaning and condition check of the pump interior - quick disassembly

ViscoTec 1C dispenser vipro-PUMP ▪ Volumetric dispensing, regardless of viscosity ▪ For low to high viscosity materials ▪ Particularly suitable for highly abrasive, filled or shear sensitive materials ▪ Modular scalability of volume flow within the model range ▪ Programmable suck-back prevents dripping or stringing of product ▪ Material entry with Tri-Clamp DN 20 connection for optimized material flow and fast coupling of material supply ▪ Locking ring for easy and fast disassembling of drive unit ▪ Drive unit connection with optimized power transmission free from clearance ▪ Optimized dispenser bracket for easy adjustable mounting ▪ Long lifetime due to low wear ▪ Different rotor and stator materials available ▪ Continuous dosing, pulsation free ▪ Interior non-stick coated ▪ Dividable rotor assembly for easy & fast replacement and low spare part costs ▪ Easy cleaning and maintenance due to quick assembly and disassembly options

▪ Modular setup with five different available dispenser sizes on each side ▪ Static mixing of two materials with same or different viscosities ▪ Adjustment of the desired mixing ratio by adjusting the speed ratio of both dispensers ▪ Volumetric dosing, regardless of viscosity ▪ For low to high viscosity materials ▪ Particularly suitable for abrasive, filled or shear sensitive materials ▪ Continuous dosing, pulsation free ▪ Interior non-stick coated ▪ Linear relation between dosing volume and rotation speed ▪ Programmable suck-back prevents dripping or stringing of product ▪ Different rotor and stator materials available as standard ▪ Long service life due to application-specific rotor-stator combinations ▪ Easy cleaning and maintenance due to quick assembly and disassembly options ▪ Mixing ratio 1:1 - 100:1 ▪ Volume flow of 0 - 1,300 ml/min (depending on mixing ratio, material and dispenser combination)

Riga Ply Birch plywood sanded on both the faces. Birch plywood has a wide range of application. Plywood is composed of 1.4 mm thick veneers by cross bonding. Riga Ply is the basis for all other types of plywood products. Grades B (I) - for high quality painting, staining and lacquering. S (II) - for good quality painting, staining and lacquering. BB (III) - standard grade (plugged), for interior paint finish and coating with transparent and non-transparent thicker overlays and films, and also veneering. WGE - plywood of WG grade without open defects (repaired with epoxy filler), for coating with non-transparent finishing material. WG (IV) - for use where surface appearance is not important, reverse grade. Advantages Environmentally friendly, durable, easily workable. Applications Riga Ply has a wide range of application for interior and exterior use: building and construction, transport, packaging, furniture, joinery, sports equipment, children toys and other applications. Sizes 1220 mm x 2440 / 3050 mm 1250 mm x 2500 / 3000 mm 1500 mm x 2500 / 3000 mm 1525 mm x 2400 / 3050 / 3660 mm 2150 mm x 3050 / 3340 / 3850 mm 2500 mm x 1250 mm Long grain birch plywood panels with the length up to 2500 mm are also available. Cut-to-size panels and machining available in accordance with the customers' requirements. Thicknesses 4, 6.5, 9, 12, 15, 18, 21, 24, 27, 30, 35, 40, 45, 50 mm.