Insulator - Import export

Our uninsulated halls offer simple and inexpensive all-round protection for the storage of temperature-insensitive goods. They are ideally suited for storage, roofing of construction sites or for temporary assembly. The areas of application of our uninsulated halls: - Storage for temperature-insensitive goods - protected loading of transporters - protected parking and storage area - Picking for goods of all kinds - Maintenance and repair For your roof and wall covering you can choose between a PVC tarpaulin or a trapezoidal sheet. Made of highly tear-resistant, and durable industrial PVC, tarps are a cost-effective alternative compared to other cladding options.

CSN® Insulator Heaters are used in flue gas cleaning systems for preheating the insulators and as protection of the equipment against condensation and freezing during shutdown periods

High-Temperature insulating hose (HT hose) protects heat-conveying lines and prevents thermal damage to adjoining parts with a fiberglass and double-coated silicon rubber top layer. The HT hose is available as a self-contained or re-closable sleeve as well as a custom-made mat. The approximate surface temperature of the duct can be up to 500°C.

VDE approved mat designed for use in front of open switchboards and high voltage equipment. Provides safety for operatives against electric shocks. Fine fluted surface has slip-resistance benefits. Tested to 50,000 volts according to DIN EN 60243-1 (VDE0303 part 21) IEC 60243-2:1996

High temperature adhesive tape with onesided aluminum foil suitable for a maximum radiant heat of 1000 ° C

Our insulated brush-holder bolts provide the mounting basis for most leg brush holders and brush holders with clamps. What fits your design? At MACK, we always go into things in depth and talk about the details. We fit our holders on insulated brush-holder bolts, which can be produced individually to special measurements.

The light weight and pliability of aluminum make it easy to work with and can streamline installation. In addition to the weight advantage and ductility, aluminum provides a complete barrier to light, moisture and magnetic waves. Impermeable to all gases including oxygen, aluminum also provides superior fireproofing capabilities for both industrial and residential construction. Aluminum insulation offers good noise reduction properties along with resistance to corrosion and heat. Not only does this improve interior environments, it also increases product life and efficiency. These proven characteristics continue to make aluminum the leader in insulation and the preferred choice for all types of building and construction.

Our OHLER product line is specifically designed for use in automobiles and caravans. Novelis is one of the leading suppliers of flexible tubes and hoses for the automotive sector with products used for heat protection, air ducts, exhaust pipes, thermal insulation and energy absorption.

Due to their porous structure, VYON® and GURON® are ideal for sound insulation, as they enable sound attenuation of up to 30 dBA. Silencer Noise is dangerous to health. That is why noise reduction is an important task in the area of ​​occupational safety. Due to their porous structure, VYON® and GURON® are ideal for sound insulation, as they enable sound attenuation of up to 30 dBA. In addition, VYON® silencers are also suitable for ventilation and filtration. Connection size: 8 mm (push-in silencer) Ø mm: 13.5 +-0.5 mm Length of sintered body with collar: 22 +- 1.5 mm Total length including thread: 43.5 +-3 mm

Due to their porous structure, VYON® and GURON® are ideal for sound insulation, as they enable sound attenuation of up to 30 dBA. Silencer Noise is dangerous to health. That is why noise reduction is an important task in the area of ​​occupational safety. Due to their porous structure, VYON® and GURON® are ideal for sound insulation, as they enable sound attenuation of up to 30 dBA. In addition, VYON® silencers are also suitable for ventilation and filtration. Connection size: 1/2“ Ø mm: 24.8 +/-1 mm Length of sintered body with collar: 68 +-1.2 mm Total length including thread: 78.5 +-1 mm

Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) • mixed-cell (semi-closed) EPDM (EPDM-SC) Technical properties Can withstand a wide range of requirements

Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) • mixed-cell (semi-closed) EPDM (EPDM-SC) Technical properties Can withstand a wide range of requirements

Due to their porous structure, VYON® and GURON® are ideal for sound insulation, as they enable sound attenuation of up to 30 dBA. Silencer Noise is dangerous to health. That is why noise reduction is an important task in the area of ​​occupational safety. Due to their porous structure, VYON® and GURON® are ideal for sound insulation, as they enable sound attenuation of up to 30 dBA. In addition, VYON® silencers are also suitable for ventilation and filtration. Connection size: 3/4“ Ø mm: 37.6 +/-0.5 mm Length of sintered body with collar: 124.8 +-1 mm Total length including thread: 139.8 +-1 mm

Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) • mixed-cell (semi-closed) EPDM (EPDM-SC) Technical properties Can withstand a wide range of requirements As a manufacturer and dealer

Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S )

Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) • mixed-cell (semi-closed) EPDM (EPDM-SC) Technical properties Can withstand a wide range of requirements As a manufacturer and dealer

Due to their porous structure, VYON® and GURON® are ideal for sound insulation, as they enable sound attenuation of up to 30 dBA. Silencer Noise is dangerous to health. That is why noise reduction is an important task in the area of ​​occupational safety. Due to their porous structure, VYON® and GURON® are ideal for sound insulation, as they enable sound attenuation of up to 30 dBA. In addition, VYON® silencers are also suitable for ventilation and filtration. Connection size: 6 mm (push-in silencer) Ø mm: 12.5 +-0.5 mm Length of sintered body with collar: 24.5 +-1.5 mm Total length including thread: 45 +-3 mm

Our thermally insulated halls are the highest quality solution and offer the best protection for sensitive goods. Thanks to all-round high insulation by means of sandwich elements, these lightweight halls can be used in all areas. The areas of application of our thermally insulated halls: - Storage for sensitive goods - protected parking and storage space - Assembly and commissioning for goods of all kinds - Maintenance and repair - Production and workshop - Sales and exhibition areas Benefit from the excellent heat-insulating and low-maintenance properties of full cladding made of sandwich elements. They consist of two outer shells made of steel and a foam core made of polyurethane or mineral wool, thus ensuring optimum insulation. This means that the energy required to heat the industrial hall can be significantly reduced. As a positive side effect, appropriate noise protection is generated at the same time.

HR-Structures' lightly thermally insulated industrial halls are equipped with Thermoplane roofing and sandwich panel wall cladding. This combination is the smartest solution for slightly temperature-insensitive goods. The areas of application of our lightly thermally insulated halls: - Storage for slightly temperature-sensitive goods - Protected parking and storage space - Assembly and order picking for all kinds of goods - Maintenance and servicing Roofing by means of Thermoplane is the best solution if no elaborate insulation measures are desired, but condensation and condensation water in the hall are to be avoided. It consists of two shells which are filled with air and thus provide additional insulation. Wall cladding made of sandwich elements is the best way to gain the maximum insulation.

Corner and plugin profiles and seat support covers TC products aren’t always apparent at first glance. They often resolve problems in complex assemblies. For instance, they are used to meet the need for a component that has good thermal insulation properties, but is also lightweight and has a high mechanical load capacity. Providing solutions with composite materials Lightweight yet high rigidity and strength Good thermal insulation Freedom in design for customised shapes Highquality, paintable surfaces Undercuts can be created in the profile Universal for radio waves

We supply molded seals and special elastomer components made of special compounds based on ACM / AEM, NBR / HNBR and FKM / FPM for various hydraulic applications in mechanical engineering.

Traditionally, our rubber-to-metal seals are used in the engine and transmission sectors, often with the elastomer FKM / FPM.

OKS 1105 prevents the formation of electrically conductive layers and minimises the risk of flashovers and dielectric losses. The insulators and switchgear covered with the paste thus maintain a good insulation resistance. Sealing lubrication for electrical or electronic equipment such as relays, plug-in connections, cable lugs and lamp sockets Protection of insulators and switchgear in humid atmospheres, for example of junction boxes, screw terminals, overload cutouts at high-voltage pylons, connecting cables and terminal connections Lubricant for plastic screw connections and other moving parts of metal, ceramic, plastic Advantages and benefits Excellent water repellent properties Excellent surface wetting Good adhesion on glass, porcelain and plastics Stable consistency across a wide temperature range Very good resistance to chemical and weather-based influences (e.g. ozone, UV radiation) Neutral with regard to many materials

Our focus lies on heat-sealable adhesion promoters for thermoplastics, thermosets and vulcanization adhesion promoters for elastomers. However we also provide functional coatings with special properties such as electrical conductivity, abrasion resistance, sliding properties, temperature resistance and much more.

20 ft Iso container - ex - Reefer Container painted in dark green

Increases engine performance the exhaust heat remains in the manifold, which improves combustion chamber ventilation and thus performance. Reduces the heat in the engine compartment by up to 70%, resulting in cooler intake air.

Heat protection and fire protection for pipes and hoses. Also available as mats or rolls for surfaces