Installation tools - Import export

The »speedfit« compressed air piping system is characterised by its simple and fast installation and it is ideally suited for conveying compressed air and liquids. It is installed without tools and the connections can be quickly fastened and released with additional sealing material not required. The »speedfit« compressed air piping system is fabricated according to BSX 5750 Part I, ISO 9001, EN 29001. The good flow properties and large range of products characterise this system. Plastic pipes, aluminium pipes, air distributor sockets, pipe clamps, water separators, loosening assists, brass connectors, protective caps and retaining rings are included in the »speedfit« series.

The »speedfit« compressed air piping system is characterised by its simple and fast installation and it is ideally suited for conveying compressed air and liquids. It is installed without tools and the connections can be quickly fastened and released with additional sealing material not required. The »speedfit« compressed air piping system is fabricated according to BSX 5750 Part I, ISO 9001, EN 29001. The good flow properties and large range of products characterise this system. Plastic pipes, aluminium pipes, air distributor sockets, pipe clamps, water separators, loosening assists, brass connectors, protective caps and retaining rings are included in the »speedfit« series.

Double-acting pneumatic cylinder for integrated installation in clamping tools.

Features • Without pre-drilling in single-layer gypsum plasterboards • No cracking of the surface due to special thread geometry • In gypsum plasterboards high holding values up to 8 kg per fixing point • PZ2 driver for simple installation Description & Area of Application • Glass fibre reinforced gypsum plasterboard wall plug • Reinforced drill tip for easy installation without additional setting tool • For single layer gypsum plasterboards • Spiral + screw: Screw with PZ driver

The genius tool for quick installation of bolt screws with power driver Quickest installation through new put - on system. Suitable to screw in and out Simply put on the screw - turn - and take off We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

Do you want to use the OnRobot grippers as double grippers? The Dual Quick Changer double gripper system allows the use of different OnRobot gripping tools in one pass. With this innovative solution, you can use two RG2 grippers or one RG6 gripper with a VG10 – it’s up to you. Switch quickly and seamlessly between our tools with the Dual Quick Changer to maximize the utilization of your robots. With the Dual Quick Changer, throughput times can be accelerated and thus the productivity of your plant increased. Not only suitable for OnRobot products. The DUAL Quick Changer can also be combined with tools from other manufacturers. It can also be used for own constructions. Another example are existing tools, which can also be equipped with the OnRobot quick-change system. The Dual Quick Changer is the alternative to the Quick Changer. This makes it easy to install two tools on one robot arm.

The Quick Changer system enables quick and easy tool change. It has a low weight, a low installation height and is designed for a payload of up to 20 kg. It is patented, reliable and equipped with a user-friendly connection mechanism. Particularly secure locking structure and locking springs. The Quick Changer system is a unique product and ideal for all collaborative robotic applications. The Quick Changer is the easiest and fastest tool changer. Simply everything you need in one package. Not only suitable for OnRobot products. It can also be combined with tools from other manufacturers. It can also be used for own constructions. Another example is the use of existing tools. These can also be equipped with OnRobot’s quick change system. The Quick Changer is alternatively also available as Dual Quick Changer. This makes it easy to install two tools on one robot arm.

SPIROL offers a line of light duty and heavy duty Pin Driving Chucks designed to be used in SPIROL’s Manual Pin Inserters (Model PM, Model PMH or Model PMX). A Pin Driving Chuck may also be used in a drill press or arbor press with an adaptor. All Pin Driving Chucks are designed with spring tension at the tip to hold the pin securely in place prior to and during installation. The exposed end of the pin is then placed into the hole and the tool is advanced to complete the installation. The tools are supplied with a flush, above-flush or below-flush setting, depending on the application requirements.

The HONSEL COIL "cone" can be installed in the same way as a coil with tab. No additional or special tools are required for process-reliable installation. When the HONSEL COIL "cone" is screwed onto the installation spindle, the conical portion of the wire thread insert creates a clamping effect between the installation tool and the coil. This ensures a stable installation process into the work piece. Advantages: — tab-free and therefore optimally designed for e-mobility due to no risk of tab debris. — Shallower blind hole depths can be realized — Subsequent processes are no longer necessary (breaking and removing of the installation tab) — No thread skipping during installation — Cycle time reduction of 20-30 % per installation — No special tools required for the installation process — The installation process improves due to the conical portion

With the camera system of Zoller + Fröhlich, color information can be mapped into data measured by the Z+F PROFILER® 9012 in one step. The camera system Z+F MapCam S has high-resolution sensors, a very wide field of view and covers the entire measuring area. The high frame rate of the cameras allows gapless and sharp images at speeds of up to 80 km/h. The camera system is easy to install with just one tool. In addition, it may be used with any mobile mapping system (MMS) which is compatible with the Z+F PROFILER® 9012. Z+F MapCam® S+ The new camera system Z+F MapCam® S+ has high-resolution sensors, a very wide field of view and a high dynamic range with images. Combined with the MapCams they cover the whole measuring area of the 2D laser scanner. The camera S+ is exactly matched to the basic camera C , fully compatible with them and provide very realistic and parallax-free color information.

With the camera system of Zoller + Fröhlich, color information can be mapped into data measured by the Z+F PROFILER® 9012 in one step. The camera system Z+F MapCam C has high-resolution sensors, a very wide field of view and covers the entire measuring area. The high frame rate of the cameras allows gapless and sharp images at speeds of up to 90 km/h. The camera system is easy to install with just one tool. In addition, it may be used with any mobile mapping system (MMS) which is compatible with the Z+F PROFILER® 9012. Z+F MapCam® C+ The new camera system Z+F MapCam® C+ has high-resolution sensors, a very wide field of view and a high dynamic range with images. Combined with the MapCams they cover the whole measuring area of the 2D laser scanner. The camera C+ is exactly matched to the basic camera C , fully compatible with them and provide very realistic and parallax-free color information.

The OPD9000 series are full HD widescreen monitors that make it easy to operate complex software applications. The integrated multi touch technology allows comfortable operation with several fingers - even when wearing work gloves. Thanks to the innovative mounting system, the OPD9000 monitors can be quickly mounted into control panels and machine housings without the need for special tools or additional installation parts. The monitors can be easily equipped with the optional HDBaseT receiver module, enabling signal transmission over distances of up to 100 metres.

Wire Belt Company offers a range of belt maintenance tools for easy removal, repair or installation of metal conveyor belts. All tools are packaged in a reusable storage sleeve to help maintain the tools precision and cleanliness.

The PERFECT Fix cable gland is the perfect cable entry solution for the installation in areas with limited space. Features: — easy mounting and dismounting from one side — no inner (female) thread required — locknut on the inner side obsolete — quick and easy installation without special tools — advantageous for use in hard to reach places — integrated anchorage for cables — wide sealing and clamping range — for cables from 3 to 21 mm — continuously adjustable in wall thickness from 1-4 mm — temperature range -20 °C / +100 °C — protection grade IP68

Variable cable routeing with superior strength and durability Open, robust wire-tray trunking systems offers excellent cable routeing solutions in challenging industries such as telecommunications and IT, the food industry and chemical industry as well as machinery and equipment. The system is approved in accordance with UL and DNV for offshore use. Your advantages: Open, easy to manage cable layouts Safe, very strong and corrosion-resistant construction Easy assembly and installation with two tools and two types of connectors Easy to clean, good ventilation Wire-tray Trunking is available in various cross sections from 53 mm x 46 mm to 620 mm x 110 mm and in heights of 60 mm and 100 mm, as mini-trunking from 40 mm x 20 mm in U-, C- and G-formats and as flat trays.

Ready-to-install trunking systems – on time and at a fixed price Practical cable routeing – this means the combination of high-grade trunking products with a comprehensive range of services covering design, tools and installation. Customers can expect higher productivity, further rationalisation and cost savings. Cutting and fixing metal trunking by hand is complex, personnel-intensive, expensive and often involves time-consuming reworking. PFLITSCH manufactures made-to-measure, ready-to-install trunking assemblies from CAD drawings efficiently and rationally. This saves substantial time for the customer and relieves his staff of many routine tasks. Delivery is made on the scheduled date and at a fixed price, which can also include installation on site if desired. Your advantages: Transparent and cost-effective total price Designed to drawings Automatically generated parts and ordering lists Delivered on schedule Optimised production planning Relief of your staff

Insulated screwdriver Bit 1,0 x 5,5 mm - 113 mm long, so sees the mechanic where he screwed with the battery screwdriver! - Electrically isolated‐ From the top to the recording! This is because the voltage where it belongs -into the part and not the tool ! - Color code (a color for each screw type; Size by different color gradations seen) – it is the first grip is the right tool at hand!

Crimping tool for street lighting connector Cu rm 10 mm² | re 16 mm²

Screwdriver for the connection set street lighting - Isolated - Hexagon - Wrench size 2,5 - Length 80 mm (without handle) - suitable for screw connector No. 13001

Screw connector 2,5-16 re Pack of 100 pcs.

Press connector 10qmm Cu re 10 Pack of 100 pcs.

Plastic case with foam insert for the connection set street lighting. Blank case without tools !

The SSF 10 is a keyless quality drill chuck.Ideal for battery screwdrivers as our AS 5. ► Tension range 1 mm – 10mm ► with ¼“ (6,3mm) - Hexagonal bit ► Length 100 mm ► Diameter 42 mm ► Made of impact resistant plastic ► Tailored to battery screwdriver AS 5 and AS4 with Iso-cap

Replacement battery for AS5 battery screwdriver Technical Data: - 3,6 Volt - 1,5 Ah - Lithium-Ion battery

Charger for the AS5 battery screwdriver - Charger for the new lithium-ion battery of the AS5 (3,6V 1,5 Ah) -The old nickel-cadmium batteries of the AS4 can be loaded with it (3,6V 1,2 Ah)

For exact Centering head screws. • Suitable for Bit-pick-up and Battery Screwdriver • In AuS-design • Centering sleeve replaceable • Individual design to customer with small quantities possilbe. Technical Data • Wear-resistent POM • ¼“ (6,3mm)-BIT-Hexagon • 4,0x0,8 for screw heads Ø 4,5 mm • 5,5x0,8 for screw heads Ø 6 mm • 5,5x1,0 for screw heads Ø 8 mm- For precise centering head screws - suitable for Bit-pick-up und Battery screwdriver - In AuS-design - Centring sleeve replaceable - Individual design to customer with small quantities possible .

For exact centering of head scews . • Suitable for Bit pick- up and screwdrivers • In AuS-design • Centerning sleeve replaceable • Individuelle Ausführungen nach Kundenwünschen bei geringen Stückzahlen möglich Technische Daten • Verschleißfestes POM • ¼“ (6,3mm)-BIT-Sechskant • 4,0x0,8 für Schraubenköpfe Ø 4,5 mm • 5,5x0,8 für Schraubenköpfe Ø 6 mm • 5,5x1,0 für Schraubenköpfe Ø 8 mm