Insertion rings - Import export

For 90° cable entries and safe outlets from switchgear cabinets PFLITSCH UNI elbow solutions enable cables to be taken safely around corners up to 90°. These cable glands have an angled cable gland body made from die-cast zinc or PA plastic. Elbow cable glands achieve the same technical values as the UNI Dicht® standard models. The variants with a rotating coupling can direct the component leg in any direction 360° around the attached leg in order to achieve the best cable entry. PFLITSCH makes these as standard products in sizes M16 to M40 and Pg 9 to Pg 36. To feed cables at an angle into/out of switchgear cabinets or machine housings, PFLITSCH produces various short and long flanged elbows in die-cast zinc and PA plastic. They are screwed tightly on to the housing and can accept – depending on the version – cable glands in sizes M16 to M63 and Pg 9 to Pg 48. An inserted o-ring securely seals the flange to the housing.

Description: Connection joint with friction for the creation of system arms using profile pieces; pivotable 360°; friction joint can be attached lateral, transverse, or on the face of the profile; if attached on the front face, the core hole of the respective profile must be M8 threaded (min. 15 mm deep) Material: Housing: Aluminum die-cast Cover ring: Plastic Inserts: Steel Friction shaft: Steel Cover caps: Plastic Screws: Steel Washers: Steel Centering plates: Aluminum die-cast T-slot nuts: Steel Surface: Housing: Laquered Centering plates: Laquered Screws: Zinc plated Washers: Zinc plated T-slot nuts: Zinc plated Color: Housing: Alu color Cover ring: Gray ≈ RAL 7042 Cover caps: Gray ≈ RAL 7042 Centering plates: Alu color Set: Various Sets available - Please contact us for Details Pack Quantity: 1 piece/set

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: stainless steel AISI 303, sealing insert: VITON, o-ring: VITON, protection class: IP66/IP68 - 5 bar, strain relief: DIN EN 62444 Tab. 2A, range of temperature: -25 °C to +230 °C, short connection thread: M12 - M40

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated, lamellar insert: TPE, o-ring: NBR-Oz, protection class: IP66/IP68 - 5 bar, strain relief: DIN EN 62444 Tab. 2A, range of temperature: -40 °C to +100 °C, short connection thread with two-piece sealing insert, M16 - M63, short connection thread with one-piece sealing insert, M12 - M63

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: stainless steel AISI 316 Ti, sealing insert: VITON, o-ring: VITON, protection class: IP66/IP68 - 5 bar, strain relief: DIN EN 62444 Tab. 2A, range of temperature: -25 °C to +230 °C, short connection thread: M12 - M40

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated, lamellar insert: VITON, o-ring: VITON, protection class: IP66/IP68 - 5 bar, strain relief: DIN EN 62444 Tab. 2A, range of temperature: -25 °C to +230 °C, connection thread: M12 - M40 / PG 7 - PG 29

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated (screws are stainless steel), lamellar insert: PA 6, sealing ring: CR, o-ring: NBR-Oz, protection class: IP66/IP68 - 5 bar / IP69k, test standard: UL 514B, range of temperature: -30 °C to +100 °C, connection thread: M12 - M32

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated, lamellar insert: PA 6, sealing ring: CR, o-ring: NBR-Oz, protection class: IP66/IP68 - 5 bar / IP69k, test standard: UL 514B, strain relief: DIN EN 62444 Tab. 2A, range of temperature: -30 °C to +100 °C, connection thread: M12 - M63 / PG 7 - PG 29, additional information: cable in the whole clamping range can't be operated without removing the isolation (substitute product would be our wege® M Standard EMC 359.)

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: stainless steel AISI 303, sealing insert: TPS, o-ring: NBR-Oz, protection class: IP66/IP68 - 5 bar, test standard: UL 94 V0; DIN EN 45545, strain relief: DIN EN 62444 Tab. 2A, range of temperature: -50 °C to +90 °C (briefly 100 °C), short connection thread with two-piece sealing insert: M16 - M63, short connection thread with one-piece sealing insert: M12 - M63

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated, lamellar insert: PA 6, sealing ring: CR, o-ring: NBR-Oz, protection class: IP66/IP68 - 5 bar / IP69k, test standard: UL 514B, strain relief: DIN EN 62444 Tab. 2A, range of temperature: -30 °C to +100 °C, connection thread: M12 - M63, additional information: cable including the whole clamping range with isolation is operable. (Substitute product would be our wege® M Standard EMC)

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: stainless steel AISI 303, lamellar insert: PA 6, sealing ring: CR, o-ring: NBR-Oz, protection class: IP66/IP68 - 5 bar / IP69k, test standard: UL 514B, strain relief: DIN EN 62444 Tab. 2A, range of temperature: -30 °C to +100 °C, connection thread: M12 - M63

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: stainless steel AISI 316 Ti, lamellar insert: PA 6, sealing ring: CR, o-ring: NBR-Oz, protection class: IP66/IP68 - 5 bar / IP69k, test standard: UL 514B, strain relief: DIN EN 62444 Tab. 2A, range of temperature: -30 °C to +100 °C, connection thread: M12 - M63

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated, screwing insert: PE, lamellar insert: PA 6, sealing ring: CR, o-ring: NBR-Oz, protection class: IP66/IP68 - 5 bar / IP69k, strain relief: DIN EN 62444 Tab. 2A, range of temperature: -30 °C to +75 °C, connection thread: M16 - M25

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: stainless steel AISI 316 Ti, sealing insert: TPS, o-ring: NBR-Oz, protection class: IP66/IP68 - 5 bar, test standard: UL 94 V0; DIN EN 45545, strain relief: DIN EN 62444 Tab. 2A, range of temperature: -50 °C to +90 °C (briefly 100 °C), short connection thread with two-piece sealing insert: M16 - M63, short connection thread with one-piece sealing insert: M12 - M63

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated, lamellar insert: PA 6, sealing ring: CR, o-ring: NBR-Oz, protection class: IP66/IP68 - 5 bar / IP69k, test standard: UL 514B, strain relief: DIN EN 62444 Tab. 2A, range of temperature: -30 °C to +100 °C, connection thread: M12 - M63 / PG 7 - PG 48

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated, sealing insert: TPE, o-ring: NBR-Oz, protection class: IP66/IP68 - 5 bar, strain relief: DIN EN 62444 Tab. 2A, range of temperature: -40 °C to +100 °C, short connection thread with two-piece sealing insert long: M16 - M63 / PG9 - PG48, long connection thread with two-piece sealing insert long: M16 - M63, short connection thread with one-piece sealing insert long: M12 - M63 / PG7 - PG48, long connection thread with one-piece sealing insert long: M12 - M63

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: stainless steel AISI 316 Ti, sealing insert: TPE, o-ring: NBR-Oz, protection class: IP66/IP68 - 5 bar, strain relief: DIN EN 62444 Tab. 2A, range of temperature: -40 °C to +100 °C, short connection thread with two-piece sealing insert, M16 - M63, short connection thread with one-piece sealing insert, M12 - M63

Cable conduits made of PVC-U with plug-in sleeve Manufactured acc. to DIN 16875 Standard design: Sleeve type: plug-in sleeve Sealing ring: inserted in the factory Sharp end: with plug-in depth marking and chamfer Length: 6 m Colour: black/anthracite Possible designs: Länge: 1 m to 6 m Farbe: special colours are available on request Labelling: acc. to customer specifications

Cable conduits made of PP with plug-in sleeve Manufactured acc. to DIN 16878 or prEN 14285 Standard design: Sleeve type: integrally moulded plug-in sleeve (SM) Sealing ring: compression lip sealing ring, type “SX” (inserted in the factory) Sharp end: with plug-in depth marking and chamfer Length: 6 m Colour: black Inner surface: smooth Possible designs: Length: 1 m to 6 m Coloured stripes: co-extruded Colour: on request Outer surface: coloured co-extruded or solid dyed Inner surface: inner grooves for reducing the cable pull-in forces Labelling: acc. to customer specifications

Cable conduits made of PE-HD with plug-in sleeve Manufactured acc. to DIN 16876 Standard design: Sleeve type: integrally moulded plug-in sleeve (SM) Sealing ring: compression lip sealing ring, type “SX” (inserted in the factory) Sharp end: with plug-in depth marking and chamfer Length: 6 m Colour: black Inner surface: smooth Possible designs: Quality: DIN 16874 Length: 1 m to 6 m Coloured stripes: co-extruded Colour: on request Outer surface: coloured co-extruded or solid dyed Inner surface: inner grooves for reducing the cable pull-in forces Labelling: acc. to customer specifications