Industrial ceramics - Import export

ALWA MOULD P is a cold curing casting resin for the production of porous moulds, slabs and blocks for the ceramic industry. It is a porous and high-strength plastic, which is well-suited for high pressure casting applications. ALWA MOULD P can be used in various areas of the tableware and sanitary ceramics, technical ceramics, plastic mould procedure as well as various filtration processes. The high stability and defined porosity of the material allows highly accurate mould surface reproductions. With ALWA MOULD P various geometric moulds for filtration processes of suspensions can be produced. ALWA MOULD P can be used for ceramic slip pressure casting procedures. In this procedure, water is removed by a filtration process of a clay suspension (slip), so that an increasing clay layer is built on the mould wall over time. The moulds, slabs and blocks of ALWA MOULD P are easily machinable (e.g., drilling, milling).

We are your reliable partner for the procurement and processing of technical ceramics, e.g. Oxide ceramics (alumina, magnesia, zirconium oxide) and non-oxide ceramics (with carbide or nitride). Technical ceramics - also called industrial ceramics or industrial ceramics - have unique material properties and are therefore one of the most powerful materials available. We offer the following ceramic materials and parts: Semi-finished products: Rods, pipes, flat material, etc. Laboratory parts: bowls, crucibles, etc. Finished parts: Drawing parts of all kinds according to customer requirements

The INFICON Porter™ CDG020D Capacitance Diaphragm Gauge is a high quality, cost effective, gas type independent absolute pressure sensor. The Porter is designed for stable long time performance in industrial environments. The ceramic sensor provides excellent span stability over many years of maintenance free operation paired with outstanding zero stability. The corrosion resistant single material sensor architecture guaranties excellent temperature compensation. Fully digital electronics and small footprint defines flexibility in any integration. The Porter vacuum gauge is humble, reliable, always available and never overpaid. (1) Non-linearity, hysteresis, repeatability at 25 °C ambient operating temperature without temperature effects after 2 hours operation. (2) Non operation (3) Increase 10 ... 90% percent FS

Micaceous iron oxide (Fe2O3) is a pure, natural product in the oxide class of minerals. Its hardness according to Mohs is 6.0 to 6.5, with a density of 4.8g/cm³. In addition to standard types for heavy-duty corrosion protection, newly developed product types especially well suited for thin-film corrosion protection and also as a zinc dust replacement are available. For the ceramics and plastics industry, we supply micaceous iron oxide as a metallic effect pigment in very coarse, narrow grain size ranges.

Together with the Fachhochschule Münster – University of Applied Sciences we are working on ALWA PERM (patent No. 2583995). This is a metal-filled casting resin for producing a porous, resin-bound mould. These materials are applicable in the areas of thermoforming, the ceramic industry, intake moulds and devices, pneumatic cushioning, the filter industry, etc. ALWA PERM allows a castable production of porous metallic materials with a binder for the first time. The system offers a highly accurate mould surface reproduction. The profile characteristics goes far beyond the current state of the art. NO MORE DRILLING OF VACUUM HOLES! NO DAMAGE OF THE MOULD SURFACE DUE TO DRILLING HOLES

From Electronic Waste We successfully dismantle old electronic devices in collaboration with a recognized workshop for disabled people. We operate regionally but offer these services throughout Europe. From Cathode Ray Tubes By recycling cathode ray tubes, we produce raw materials for the glass and ceramic industry. With our many years of experience in this field, we offer these services across Europe. Waste Disposal Company

Tunnel Kiln Tracker temperature profiling systems are comprised of a data logger, a protective thermal barrier, software, and thermocouples. Using a DATAPAQ system, you can obtain reliable and accurate in-process temperature profiling in tunnel kilns used to fire brick and roof tiles, tableware, sanitaryware, tile, refractory and more. • Reliable profiling system for high temperatures and long process durations typical in the ceramics industry • Powerful and user-friendly DATAPAQ Insight analysis software • Highly accurate and programmable 10 or 20 channel data loggers storing up to 3.6 million data points • DATAPAQ TP3 data logger in a stainless-steel casing • Radio Telemetry option for real-time monitoring

The AccuCarb® Ceramic Probe is a high accuracy zirconia oxygen sensor designed for the heat treating industry. AccuCarb® Ceramic Probe is a patented, ceramic sheathed probe, high temperature probe, specifically designed for generator and for metal sintering applications. The standard model has an integral type K thermocouple and a tube fitting for air purge burnout of soot.

The low-cost High Temperature ICP®/ IEPE accelerometer, model HT602D01, is ideal for vibration measurements in higher temperature applications, including the paper, plastics and steel industries. These high temperature ceramic shear ICP® accelerometers feature a 2-pin MIL-C-5015 side-exit connector in a low-profile package. They can be used in environments with temperatures up to +325°F/+163°C. The sensing element of these accelerometers provides a sensitivity of (±10%) 100 mV/g (10.2 mV/(m/s²)) with a frequency range of (±3dB) 30 to 480000 cpm (0.5 to 8000 Hz). — Industrial ICP® vibration sensor — Continuous operating temperature up to 163 °C — With through hole — Measuring range 50 g — Sensitivity 100 mV/g — Frequency range 0.8 ... 8,000 Hz — Single-point calibration at 100 Hz — 2-pin connection socket on the side Please contact us directly for an individual offer.

Hitachi High-Technologies Europe GmbH is very pleased to introduce Hitachi Magnetrons, which are highly appraised for their high quality, high reliability, compact shape, light weight and low spurious radiation with up to 10kW Power, different type of cooling (water/forced air) and different outline dimensions. Hitachi Magnetrons are well-suited for various types of industries specifically in the fields of: Electronic Device Manufacturing Microwave Light Emission UV-Curing Industrial and Vacuum Drying Semiconductor Automotive Ceramic Industry Food Processing Dispensing and Coating Bonding & Lamination Applications Magnetrons' Line-up: 2M121A, 2M131, 2M130, 2M256, 2M251, 2M252, 2M304, 2M305 Magnetron 2M121A: Power (kW): 1.4 Frequency(MHz): 2,455 Cooling: Forced Air Outline Dimensions (mm): 127x104x109 Weight (kg): 1.4 Magnetron 2M130: Power (kW): 2.0 Frequency(MHz): 2,455 Cooling: Forced Air Outline Dimensions (mm): 128x116x122 Weight (kg): 2.3