Results for
SHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
these screws are used in different machine.
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
These are the pin ring made by stainless steel,which is the accessories used for sensor.
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
These are accessories for precision machining.
Request for a quoteEDDYLAB GMBH
Germany
Based on the SL series, the SLT probes are also characterized by an ultra robust construction and a fully stainless steel housing which makes them suitable for harsh environments. The combination of a hardchrome plated shaft with 6 mm in diameter and precision bearings guarantees highest resistance to lateral forces on the push rod. There are three different functional variants available to meet the demands of most measuring tasks: ■ Spring loaded mechanism: The push rod is fully extended by an internal spring. ■ Pneumatic version 1: The push rod extends by applying pressurized air. An internal spring retracts the push rod after releasing the pressure. ■ Pneumatic version 2: The push rod retracts by applying pressurized air. An internal spring extends the push rod after releasing the pressure. Each sensor requires a carrier frequency measuring amplifier to operate, which evaluates and transforms the sensors signal to a standardised analog output signal of 0...10 V or 4...
Request for a quoteEDDYLAB GMBH
Germany
■ Configurable output signal (4...20 mA, 0...20 mA, 0...5 V, 0...10 V, ±5 V, ±10 V) ■ DIN rail mounting ■ Low residual noise ■ Built-in cable break detection with alarm-output
Request for a quoteEDDYLAB GMBH
Germany
The SL series offers ultimate reliability and precision in a small size, and is designed for industrial and lab use. The sensors can also be used under water because of their high protection class and the stainless steel housing. ■ Measurement ranges 10...600 mm ■ Housing ø20 mm ■ Linearity up to ±0,10 % of full scale ■ Protection class IP67, optional IP68 ■ Sensor working temperature up to 200 °C ■ External, or cable electronics with cable break detection ■ Customized versions available ■ Predestined for use in harsh industrial enviroments
Request for a quoteEDDYLAB GMBH
Germany
The SM series offers ultimate reliability and precision in a small size, and is designed for industrial and lab use. With a measuring range from 2 up to 200 mm and various configuration options (mechanics, protection class, temperature range, linearity) the SM series ensures to have a suitable measuring system for every application. ■ High precision and linearity ■ Various configuration options ■ Push-rod guided and unguided, spring loaded ■ Stainless steel housing ■ Linearity up to 0,10 % ■ Measuring range 2...200 mm
Request for a quoteEDDYLAB GMBH
Germany
he greatest challenge in the use of inductive displacement transducers is the optimization of linearity. Usual linearity deviations are around 0.30 % of the measuring range of the sensors. Values that are significantly below this can hardly be realized. With the help of the LVDT digital controller from eddylab, to which either one or two sensors can be connected, the linearity deviation of inductive displacement transducers can be almost completely eliminated. KeyFeatures ■ Improves linearity up to 0.01%. ■ High resolution (16 bit) ■ High dynamic range ■ Digital output CAN, USB interface ■ Analog output ■ High noise immunity
Request for a quoteMSO MESSTECHNIK UND ORTUNG GMBH
Germany
Radar Sensor measuring Spray quality signature for industrial applications
Request for a quoteMSO MESSTECHNIK UND ORTUNG GMBH
Germany
System measuring the lateral distribution of Rauch Landmaschinen fertilizer disc spreaders
Request for a quoteMSO MESSTECHNIK UND ORTUNG GMBH
Germany
System for spray quality monitoring a multitude of spray nozzles e.g. for agricultural sprayers
Request for a quoteMSO MESSTECHNIK UND ORTUNG GMBH
Germany
Blockage monitoring detecting partial blockage, for particulate material e.g. seed, fertilizer for seed drills and applicators
Request for a quoteMSO MESSTECHNIK UND ORTUNG GMBH
Germany
Radar material flow sensor for pipes and hoses
Request for a quoteMSO MESSTECHNIK UND ORTUNG GMBH
Germany
Short range Pulse Radar distance sensor
Request for a quoteMSO MESSTECHNIK UND ORTUNG GMBH
Germany
Long range FMCW Radar distance sensor
Request for a quoteMSO MESSTECHNIK UND ORTUNG GMBH
Germany
Doppler Radar true-ground-speed Sensor
Request for a quoteMSO MESSTECHNIK UND ORTUNG GMBH
Germany
Speed and Positioning Sensor with DGPS an Accelerometer Fusion
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
THERMA THERMOFÜHLER GMBH
Germany
The versatile Therma resistance thermometers convince with their precise measurement of fluids in the vehicle. They are optionally available with M6, M5 or M4 male threads. The technical equipment of the resistance sensor offers additional options. It is available as Pt100 or Pt1000, in Class A or optionally also as NTC 10 KΩ. This versatility ensures compatibility with motor sports products and controllers from Bosch. Screw-in resistance thermometer as Pt100 or Pt1000 or NTC 10KOhm
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
The sheathing thermocouple from Therma is perfect for reliable and fail-safe temperature measurement in the exhaust gas system. It excels with its simple structure. By selecting double-walled sheathing material made of Nimonic75, this thermocouple is well prepared for corrosion influences and vibrations along with extremely high temperatures. Furthermore, assembly with a compression-type fitting lets you decide the installation length onsite. Sheathed thermocouples NiCr-Ni, Type “K”, Class 1
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
This sensor for measuring exhaust gases was developed together with a Formula 1 team. The goal was to achieve the greatest possible reliability during the race. The sensor was designed so that it can withstand a maximum of vibrations and extreme temperatures while being made in a highly compact construction at the same time. The special feature is the connection lead. It is not made from the usual mineral-insulated stainless steel sheathed line, which is too rigid and which tends to vibration fractures. Instead, the line is made of stranded conductors with PTFE insulation and an additional heat shield so it can be easily and flexibly adapted to the environment. The sensor is being used with exceeding success by professional teams in long distance races, American race series and the domestic DTM. The benefits: Highly vibration-proof Very robust High temperature resistance (up to 1,200 °C) Individual plug assembly possible Can be individually adapted
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
This plug-in sheathing thermocouple is recommended for measuring the temperature in the exhaust gas flow. It is genuinely multipurpose, mounting with the cap nut means the thermocouple does not need to be rotated, which simplifies installation and fast replacement. In addition, it has “motor sports genes” such as vibration resistance, fast response time and high temperature resistance. The benefits: Vibration-proof Fast response time High temperature resistance (up to 1,200 °C) Various installation lengths can be supplied With cap nut Sheathed thermocouple NiCr-Ni, Type “K”, Class 1
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
The infrared temperature sensor from Therma is perfect for measuring the current tyre temperature. The temperature of the tyre and thus the associated effects are decisive factors for success in motor sports. The tyre pressure is strongly temperature-dependent. The measurements collected by the sensor permit conclusions to be drawn for ideal vehicle tuning. Large fluctuations have a direct effect on the vehicle performance and the service life of the tyre.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
With the Therma friction thermocouple you can determine the surface temperature of the brakes while driving. Attaching the mounting adapter puts uniform pressure on the brake disc through the spring-loaded sensor by using a bayonet cap. That perfectly compensates movements caused by centrifugal force and vibrations as well as the volume decrease caused by disc wear while ensuring a valid measurement. The brake disc friction sensor measures the surface temperature of the brake disc. It imparts important insights about the temperature development. That enables an indication about the brake line, intake and temperature radiation. A brake disc that becomes too hot during a race massively loses its effectiveness and deceleration to the accustomed and optimal degree is no longer possible. If the temperature is too high, the brake pads start gassing on top of that.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
The braking fluid thermocouple from Therma convinces not only with its compact construction but also with its simple installation. Just screw it in in-place of the air vent screw to measure the temperature of the brake fluid. The subsequent sheathing line can then be comfortably bent in the required direction. When the thermocouple is screwed in, the braking system is then vented through its thread. The temperature measurement of the brake fluid, along with the brake disc surface measurement, also supplies important control values for a successful and safe race. During long races or races with many downhill routes, the brake disc overheats over-proportionally. The accruing radiation heat during this has a direct effect on the brake fluid, respectively heats it up. Depending on the type of brake fluid being used, it already reaches its boiling point at approx. 140–260 °C.
Request for a quoteBEDIA MOTORENTECHNIK GMBH & CO. KG
Germany
The capacitive level sensor BEDIA NR 150 is suitable for liquids with low relative dielectric constant εr 1,8 … 6 (ref. εr 2,1). It has a MIN/MAX selector switch and the functions for MIN or MAX monitoring as well as other properties (output signal LSS or HSS, response delay etc.) are factory pre-set. The switch point is adjustable by means of a teach-in momentary switch.
Request for a quoteBEDIA MOTORENTECHNIK GMBH & CO. KG
Germany
The capacitive level sensor NR 160 is designed to monitor liquids and powders with high relative dielectric constant εr 35 … 85. The functions for MIN or MAX monitoring as well as other properties (output signal LSS or HSS, response delay etc.) are factory pre-set. The switch point is adjustable by means of a teach-in momentary switch.
Request for a quoteBEDIA MOTORENTECHNIK GMBH & CO. KG
Germany
The NR 260 is a capacitive level sensor for monitoring liquids. It is designed for use in fuel cells. The material is also suited to applications in the chemical industry for monitoring aggressive media. The functions for MIN or MAX monitoring as well as other properties (output signal LSS or HSS, response delay etc.) are factory pre-set. The Main Features of the NR 260 are high medium resistance of materials enamel, Hastelloy C4 2.4610 and stainless steel 1.4571 high protection class IP67 with connector short-circuit proof switching output 1 A, high side or low side switch MAX sensor or MIN sensor switch point factory pre-set for the following media: de-ionised water (conductivity < 4,2 μS/cm): 28 mm ± 2 mm tap water (conductivity ≈ 300 μS/cm): 22 mm ± 2 mm other media upon request; switch point adjustment via programmable interface on request
Request for a quoteBEDIA MOTORENTECHNIK GMBH & CO. KG
Germany
BEDIA level monitoring sensors are used to monitor the filling levels of liquids. The sensors detect when a filling level is exceeded or falls below a limit. Water-based liquids like coolants, AdBlue®, fresh water, waste water, bilge water and oil-based liquids like motor oils, hydraulic oils, fuels and brake fluids can be monitored. Since they contain no mechanical moving parts, their function will not be influenced by dirt particles or other influences. No electrical current is sent through the medium via an electrode with BEDIA sensors, an electrolysis of the medium is not possible. Operating Principle The function of the sensor is based on the capacitive principle. It detects the change in capacitance that occurs when an electrode surrounded by air is immersed into a liquid medium. This change in capacitance at the electrode of the sensor excites an oscillator. This signal is processed by a microcontroller-based evaluation circuit which activates or deactivates an output stage.
Request for a quoteBEDIA MOTORENTECHNIK GMBH & CO. KG
Germany
BEDIA level monitoring sensors are used to monitor the filling levels of liquids. The sensors react when a filling level is exceeded or falls below a limit. Aqueous mediums like coolants, AdBlue®, fresh water, waste water, bilge water and oil-based liquids like motor oils, hydraulic oils, fuels and brake fluids can be monitored. Since they contain no mechanical moving parts, their function will not be influenced by dirt particles or other influences. No electrical current is sent through the medium via an electrode with BEDIA sensors, an electrolysis of the medium is not possible. Operating Principle The function of the sensor is based on the capacitive principle. It detects the change in capacitance that arises when an electrode surrounded by air is immersed into a liquid medium. This change in capacitance at the electrode of the sensor excites an oscillator, causing it to oscillate. Then this signal is processed by a microprocessor-based evaluation circuit.
Request for a quoteResults for
Inductive sensor - Import exportNumber of results
99 ProductsCountries
Company type