Results for
MALEKI GMBH
Germany
Innovative silicate densifier. Protects against penetrating moisture and chemical stress. Maleki-DW 100 can be used universally to protect cementitious surfaces. The material does not form layers and does not affect the diffusion permeability of the mineral substrate. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 5 kg canister (300 kg / pallet), 30 kg canister (540 kg / pallet), 1000 kg IBC – Article-No.: 1815
Request for a quotePNZ-PRODUKTE GMBH
Germany
Suitable for transparent, universal impregnation for protecting against moss, algae and lichens. This inhibits the entry of dirt, oils and grease. Terrace and Gravestone Impregnation can be used on absorbent, mineral substrates such as exposed aggregate concrete, terracotta, natural ans artificial stone, granite, brick walls, hard rock, stone stairs and gravestones.
Request for a quotePNZ-PRODUKTE GMBH
Germany
Suitable for wood outdoors (garden furniture, facades, balconies, fences, doors, windows, gates, beams, ceilings), cork as well as clay and cotto surfaces. Water Proofer offers long-term protection against moisture of any kind and impregnates while invisible to the naked eye.
Request for a quotePNZ-PRODUKTE GMBH
Germany
Suitable for impregnation of WPC (Wood-Plastic Composites), as well as Resysta and synthetic rattan. WPC Impregnation is a solvent-free, transparent impregnation suitable for any WPC surfaces. Our product is made from natural oils, impregnates WPC surfaces open-pore, makes them weather-resistant and increases resistance against UV-rays.
Request for a quotePNZ-PRODUKTE GMBH
Germany
Suitable for transparent universal impregnation to protect absorbent mineral surfaces such as, exposed aggregate concrete, terracotta, natural and artificial rock, granite, brick wall, hard stone, stair stone and for hydrophobing.
Request for a quotePNZ-PRODUKTE GMBH
Germany
Suitable for any wooden construction (only outdoors) without ground contact (wooden cladding, windows, sills, garden houses, timber frame, garden furniture, balconies, wooden truss, doors, gates), that are to be treated decoratively with glaze, paint or varnish (not suitable for oak or hardwood). Impregnation Primer W210 is prophylactic against blue stain and rot. Our product improves the durability and adhesion of subsequent coats especially on highly absorbent substrates or those with varying degrees of absorbency. The coat is nearly odorless, completely odorless even when dry and it dries quickly. The coat slightly raises the grain, fills the wood pores and can be sanded easily.
Request for a quoteVERFAHRENSTECHNIK HÜBERS GMBH
Germany
System for the impregnation of electomagnetic coils, e.g. of electric motors, transformers, generators Impregnating in electricla engineering means applying an impregnating agent in gaseous or fluid form to a porous body in order to insulate it electrically, i.e. that reliable protection against electrical breakdown is provided even when the thickness of the insulating layer is small. For each application HÜBERS provides appropriate process. HÜBERS offers all relevant process variants including vacuum impregnation, vacuum-pressure impregnation and atmospheric impregnation and of these coupled with the use of the many different impregnating agents such as varnish, resin, oil, wax, gas etc. The processes of evacuating the parts prior to impregnation and if necessary of vacuum-drying the impregnated parts are matched to the properties of the parts and ensure that the agent wets the walls of the pores properly and fills the cavities completely.
Request for a quoteROTH COMPOSITE MACHINERY GMBH
Germany
• Impregnating lines for the processing and finishing of web-shaped products, such as paper, foils, laminates and fabrics.
Request for a quoteEPOWIT BAUTECHNIK GMBH
Germany
surface protection for concrete, crack filling, hydrophobic impregnation
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Parting agent at foundry operations injection moulding, blowing and extruding processes of plastics and elastomer Avoids the sticking of e.g. adhesives and sealing excess or water wetting Sliding agent against noisy rubbing of plastics, elastomers and metals together or against each other Lubrication of cutting edges in the paper, cardboard, veneer layer and textile processing machines For easy retracting of plastic and rubber profiles, e.g. in the door and window production Advantages and benefits High efficiency because of excellent netting of the surface and building of extremely thin lubricating films Separating effect with antistatic properties Manifold applications for permanent lubrication, protection, maintaining and impregnation Neutral behaviour against plastic and elastomers Resistant against water and atmospheric influences
Request for a quoteRHEIN-CHEMOTECHNIK GMBH
Germany
Colour-enhancing sealer for instantly washed concrete products. Water-based, high alkali resistance and water resistance, results in brilliant colours, reduced efflorescence, reduced staining.
Request for a quoteRHEIN-CHEMOTECHNIK GMBH
Germany
Oil-, water-, dirt- and stainproof impregnation for high-quality concrete products. Water-based, fast-drying, water beading and oil beading effect and easy-to-clean effect.
Request for a quoteRHEIN-CHEMOTECHNIK GMBH
Germany
Premium oil-, water-, dirt- and stainproof impregnating sealer for high quality concrete products, frequently used for surface-treated (shotblast, ground, bush-hammered) concrete paving blocks and slabs. Water-based, strong water beading and oil beading effect, superior easyto- clean effect.
Request for a quoteRHEIN-CHEMOTECHNIK GMBH
Germany
Oil-, water-, dirt- and stainproof impregnation for high-quality concrete products, frequently used for surface- treated (shotblast, bush-hammered, brushed) concrete products. Water-based, fast-drying, strong and long lasting water beading and oil beading effect and easy-to-clean effect.
Request for a quoteRHEIN-CHEMOTECHNIK GMBH
Germany
Oil-, water-, dirt- and stainproof impregnation for high-quality concrete products, frequently used for surface- treated (shotblast, bush-hammered, brushed) concrete products. Water-based, fast-drying, strong and long lasting water beading and oil beading effect and easy-to-clean effect.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
MALEKI GMBH
Germany
Innovative silicate impregnation and subsoil consolidation. Protects against penetrating moisture in masonry and concrete. Maleki-LL 100 can be used universally to protect cementitious surfaces. The material does not form layers and does not affect the diffusion permeability of the mineral substrate. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 5 kg canister (300 kg / pallet), 30 kg canister (540 kg / pallet), 1000 kg IBC – Article-No.: 1810
Request for a quotePNZ-PRODUKTE GMBH
Germany
Suitable for impregnation of WPC (Wood Plastic Composites), and Resysta and synthetic rattan surfaces. WPC-Impregnation evolution is a water based, transparent impregnation which is suitable for any WPC surfaces. Our product is made from natural oils, impregnates WPC surfaces open-pore, makes them weather-resistant and increases resistance against UV-rays. Effective defrosting agent for outdoor areas due to active, moisture-regulating surface.
Request for a quotePNZ-PRODUKTE GMBH
Germany
Suitable for any impregnated, especially pressure treated, garden wood and garden furniture, like fences, carports, pergolas, plant troughs and sandboxes. Bio Wood Care Oil prevents graying of impregnated wood, refreshes color and protects and nurtures treated wood.
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Carbonfiber with special impregnation and siliconfree dynamic high performance lubricant Practical useful application data: max. temperature: +250 °C max. pressure centrifugal pumps: 25 bar Characteristics Strong against abrasive mediums, yet low friction on shaft surface. Recommended shaft/sleeve hardness HRC 45 Volume stabile, minimal shrinkage, good heat conductivity Suitable as bullrings Operating range Pressure [p max]: 30 bar, Velocity [v max]: 25 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -50… +300 °C pH: 2 - 12 Density: 1.45 g/cm³ Practical useful application data: max. temperature: +250 °C max. pressure centrifugal pumps: 25 bar Main application Boilerfeed pumps Refiner Suitable for Chemical industry Pulp and paper industry Power plant technology Boiler houses Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements. 04 - 09 mm on 1...
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Carbon Staple fiber with special Graphite Impregnation and silicon free Run In lubricant Practical useful application data: max. temperature: +200 °C Characteristics Volume stable, pressure stable High Cross section density due to special impregnation Excellent Value for money Graphitized all-round packing with Emergency run Capabilities Good wear resistance against abrasive and crystallizing products Recommended shaft surface hardness: HRC 45 Operating range Pressure [p max]: 20 bar, Velocity [v max]: 20 m/s Pressure [p max]: 250 bar, Velocity [v max]: 2 m/s Pressure [p max]: 150 bar Temperature: t = -50… +250 °C pH: 2 - 12 Density: 1.15 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Centrifugal pumps Valves Mixer Kneader Agitators Suitable for Chemical industry Pulp and paper industry Waste water technology Community facilities Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes...
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Para-Aramid Fiber Packing with PTFE Impregnation and Run-In Lubricant Practical useful application data: max. temperature: +200 °C Characteristics Volume stable, pressure stable High cross section density through PTFE blocking agent, which protects against penetration of crystallizing media Excellent value for money Good resistance against wear, with abrasive and hardening mediums Recommended shaft surface hardness: HRC 50 Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -50… +250 °C pH: 2 - 12 Density: 1.20 g/cm³ Practical useful application data: max. temperature: +200 °C Haupteinsatzgebiet Centrifugal pumps Mixer Agitators Autoclave Filter Refiner Kneader Paddle dryer Suitable for Pulp and paper industry Sugar industry Power plant technology Waste water technology Mining industry Variant Square shape P7 Form of delivery This packing can be manufactured in...
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Carbonized synthetic fiber with PTFE impregnation and run in lubricant Practical useful application data: max. temperature: +140 °C Characteristics Good flexibility Rot proof Form stable packing Good value for the money Recommended surface hardness HRC50 Operating range Pressure [p max]: 15 bar, Velocity [v max]: 15 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -50… +200 °C pH: 3 - 12 Density: 1.30 g/cm³ Practical useful application data: max. temperature: +140 °C Main application Centrifugal pumps Mixer Kneader Agitators Refiner Autoclave Gate valves Filter Suitable for Pulp and paper industry Sugar industry Waste water technology General maintenance Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements. 04 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on 5 kg spool Special length, pre-cut or die formed rings on request. 1 kg...
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Synthetic Fiber Packing with PTFE Impregnation and Run-In Lubricant Characteristics Elastic and pliable Recommended shaft surface hardness: HRC 50 Resistance against rotting Structural stability Cost effective Operating range Pressure [p max]: 15 bar, Velocity [v max]: 12 m/s Pressure [p max]: 100 bar, Velocity [v max]: 1.5 m/s Temperature: t = -50… +140 °C pH: 3 - 12 Density: 1.30 g/cm³ Main application Centrifugal pumps Mixer Kneader Agitators Refiner Autoclave Gate valves Filter Suitable for Pulp and paper industry Sugar industry Waste water technology Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements. 04 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on 5 kg spool Special length, pre-cut or die formed rings on request. 1 kg of packing of the following cross-sections corresponds to displayed meter lengths: Size mm["] Meter 4 48.1 5 [3/16"] 30.8 6 21.4 6.4 [1/4"] 19.1 8...
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Polyimid Fiber with PTFE Impregnation and Silicone Run-In Lubricant Practical useful application data: max. temperature: +180 °C High fatigue strength and flexibility Good acid resistance High cross section density through PTFE blocking agent, good for crystallizing media Recommended shaft surface hardness: HRC 35 Good pliability, therefore perfect adaption of uneven shaft surfaces Operating range Pressure [p max]: 20 bar, Velocity [v max]: 15 m/s Pressure [p max]: 60 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -100… +280 °C pH: 0 - 12 Density: 1.30 g/cm³ Practical useful application data: max. temperature: +180 °C Main application Centrifugal pumps Mixer Kneader Agitators Filter Extruder Refiner Suitable for Chemical industry Sugar industry Pulp and paper industry Mining Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements. 04 - 09 mm on 1 kg spool 10 - 15 mm on...
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Synthetic Fiber with PTFE Impregnation and siliconfree dynamic Run in Lubricant Practical useful application data: max. temperature: +180 °C Characteristics High fatigue strength and flexibility Good acid resistance (e. g. hydrofluoric acid 15 % / 50 °C) High cross section density through PTFE blocking agent, good for crystallizing media Recommended shaft surface hardness: HRC 35 Good pliability, therefore perfect adaption of uneven shaft surfaces Operating range Pressure [p max]: 20 bar, Velocity [v max]: 15 m/s Pressure [p max]: 60 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -50… +280 °C pH: 1 - 13 Density: 1.35 g/cm³ Practical useful application data: max. temperature: +180 °C Main application Centrifugal pumps Mixer Kneader Agitators Filter Extruder Refiner Suitable for Chemical industry Sugar industry Pulp and paper industry Mining Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes...
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
High purity Carbon Fiber with cross section impregnation and run in lubricant Practical useful application data: max. temperature: +250 °C Characteristics Excellent Standardisation features Cross section impregnation avoids the penetration of crystallizing mediums Wear resistant against abrasive products and with minimal coefficient of friction Self lubricating fiber with high Carbon content, reduced shaft wear and excellent heat transfer characteristics Thermally balanced construction, the coefficient of expansion is similar to steel, the packing is volume stabile and does not shrink. Therefore minimal re-adjustment needed after installation. Excellent chemical resistance Recommended shaft surface hardness: HRC 45 Operating range Pressure [p max]: 30 bar, Velocity [v max]: 25 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -50… +300 °C pH: 2 - 12 Density: 1.45 g/cm³ Practical useful application data: max. temperature: +250...
Request for a quoteVERFAHRENSTECHNIK HÜBERS GMBH
Germany
Impregnation systems to close micropores in metal castings as well as in copper, aluminium or magnesium alloy castings. The parts to be impregnated are fixed in baskets. The latter are transported by a special crane system as well as with reservoir roller conveyors. Excess material is removed by centrifuging of the baskets. The impregnating agent remaining in the pores in fluid form is hardened by heating in a hot water bath. The process sequence runs fully automatically under a microprocessor control.
Request for a quoteResults for
Impregnation - Import exportNumber of results
33 ProductsCountries
Company type
Category