High speed design - Import export

HIGH SPEED CONCRETE TRAVELLING BUCKETS ELKON high speed concrete travelling bucket is designed to deliver the concrete in the fastest way to the application point in the precast production. While the speed of normal concrete travelling buckets is 0,5 m/s, the speed of high-speed concrete travelling bucket is 2,5 m/s.

The KS Twin Gear helical bevel gearbox is a high performance and precision gearbox. This two-stage gearbox available in ratios up to 75:1 is very space-efficient and suits an array of applications. High torsional stiffness and low backlash ensure a high transmission accuracy. Features and benefits: Precision component parts Suitable for high input speeds Extremely compact design Motor mounting via coupling High torsional stiffness High torque Low-noise hypoid bevel gears

Up to 60 rivets per minute! – Endorsed by major customers! GESIPA® speed rivets are a cost-effective alternative to automation. Speed rivet technology is a joining method that requires access from only one side and which enables fast cycle times thanks to the preloaded rivets and automatic feed. Advantages of the Speed Bulb® • Optimally adapted to specific grip range • Distinct bulb formation — High grip force — High pulling force • For higher loads • Ideally suited for transmitting shear and tensile forces • Ideal for: — Higher dynamic loads — Sheet metal structures — Electrical devices — White goods

Low-noise, high-quality and high-speed ball chain (patented). The WRC ball chain (patented) design offers high contact area between the balls and the chain, which helps keep the lubricant film intact, hence allowing high-speed and low-noise operations with extended service life. — Dustproof design: The completely sealed design helps prevent dust ingress and reduce lubricant loss, which leads to extended service life. — O-type arrangement: The 4-row re-circulating balls design helps achieve equal load capacity in all four directions. — Patented design for high speed/impact: The L-shaped stainless-steel reinforcement plates with bottom latches help cover and strengthen the end caps, allowing high-speed/impact operations.

Encapsulation is the method for protecting the chip and wires against mechanical stress and environmental influences. For this purpose, cast resin is dispensed and then cured by UV light or heat, depending on the type of resin. The PowerSeal offers highest quality and maximum speed for the encapsulation of chip modules with up to 40,000 modules/hour. PowerTest - Chip Module Test System The inspection of IC modules for smart cards and RFID devices, based on parametric and functional testing, is an integral part in the production flow and quality assurance. The PowerTest is designed for high-speed testing and encoding of chip modules on 35 mm tapes. The system is also perfectly suited for initialisation and personalisation of IC modules, including OS loading. GTL700 - Glue Tape Lamination System The GTL700 is a highly reliable and flexible system for glue tape lamination of chip module tapes in preparation for the hot melt implanting process. The very efficient system can...

The Gronemeyer synchronized distributor divides the stream of products batch-by-batch and gently into two lanes. During the distribution process the products are not braked, so that functional reliability is ensured even at high speeds. The compact design permits simple incorporation into existing lines. Technical data Distribution: 2 lanes Distribution process during continuous flow of materials Product gap: from 5 mm Conveyor speed: more than 60 m/min. Lane distance: 110 mm, 130 mm Complete machine cover made of Makrolon with maintenance doors Independent electrical control system with congestion monitoring Installation length: 1200 mm Optional equipment Loading and unloading belts

LEIBINGER achieves up to 40% higher printing and production speeds with the JET3up RAPID. Products such as cables can be marked with clearly legible characters, even at speeds of 1,000 m/min (60 km/h)! To achieve this high speed, the new inkjet printer has a much higher drop frequency, among other features. The JET3up RAPID also has printheads that are specially designed for high speeds. Three different variants are available that vary by the intended industry and application. The "RAPID Wire" printhead meets the high standards of the wire and cable industry. Thanks to the innovative design in the printhead, cables and wires as well as other long, narrow products can be optimally positioned and marked. The result is cable printing that is even faster and more precise. In addition, the "RAPID Universal" and "RAPID Highspeed" printheads are available for applications in other industries.

EBS-7200 is a fast, single-head industrial printer of the type "INK-JET" (ink drop ejection) which can be used for non-contact marking of objects that move for example on a belt conveyor. The marking speed of this printer is exceptional. It is 46% faster than the 6500 and 6800 and is therefore designed for marking tasks that require an exceptionally high marking speed. The device is designed for printing with different coloured dye inks (i.e. homogeneous, pigment-free inks). The commercial versions of the printers differ in the maximum height of the printed image (MVP - maximum height of the vertical row of dots), which can be 16 (25 or 32 as an option) dots.

Advantages Reform High Speed Grinder This REFORM grinder consists of well-proven modules. We would like to draw your attention to the fact that our machine does not have a moveable table with the rotor. On our machine the rotor will be kept stationary while the grinding and measuring units are moveable. All components of this machine are from well-known German manufacturer. Most of the spare parts are available also on a local market of our customer. The machine is specifically designed for High Speed Rotor Blade Tip Grinding, therefor the machine will have several advantages, such as: — higher rigidity — especially advantages of grinding small and big rotors — smaller floor space consumption — compact machine design

CEDS asynchronous motors offer you special advantages: Low maintenance Long lifetime Compact designs Special designs Great overload capacity due to high overturning moment Large field weakening range with constant power Overload protection through temperature sensors in the winding or on the bearing Reinforced winding insulation for high dielectric strength Quiet design High speeds can be represented Controllable with position encoder and frequency converter Tension-free rotor and can therefore run in liquids, gases and in a vacuum Favorable manufacturing costs CEDS DURADRIVE asynchronous motors can be mechanically and electrically individually tailored to customer requirements. Requirements regarding the protection class up to IP 6K8K, extremely high requirements for surface protection or certifications according to ATEX, DNV GL or Bureau Veritas are not uncommon for us

• High-speed version for the highest operating speeds • Rotationally symmetrical clamping hub for optimum balancing quality

• conical hub on both sides - aluminium design • ''high speed- version'' for a speed up to 30.000 rpm • low mass moment of inertia - high balance quality • Torque range: 15 - 600 Nm • Shaft diameter: 6 - 60 mm

• conical clamping hub on both sides • rotary symetric design - high speed • plug-in, backlash free, oscillation dampening • Torque range: 10 - 2.000 Nm • Shaft diameter: 6 - 85 mm

Kawasaki's R-Series robots is widely known because this can be used in a wide range of applications in diverse industries like assembly, dispensing, inspection, machine tending, material handling, welding, etc. This is considered the top of the line for all small to medium duty industrial robots. This state-of-the-art technology boasts of its compact design, high speed, reach and work range.