High quality fittings - Import export

With FTJ-filter cloths, you can choose from approx. 40 high-quality fabric qualities, which fit your needs. The cloths consist mainly of polypropylene, polyester, polyamide and cotton. We would be pleased to advise you competently in the selection of the right filter cloth. In order to achieve the best results, fabric quality, grammage, air permeability and surface finish must be optimally tailored to your individual requirements. You can also get under-cloths at Filtertechnik Jäger. Drainage and cake drying can be improved. They also protect the upper cloths from mechanical wear. Special versions: Edge reinforcement Edge coating Reinforcement at supporting cam area Cloth collar from different materials Velcro fasteners Under-cloths/supporting fabric

The cutlery range BAGUETTE is a timeless classic. Its distinctive design embodied in mirror-polished 18/10 stainless steel material makes it a high quality and perfectly fitting cutlery for every occasion.

The TC range of immersion coolers are a flexible solution for a variaty of cooling tasks. The devices are simple and universally used for rapid cooling of fluids. Typical applications include counter-cooling for heat circulation thermostats or replacement of dry ice. For many applications immersion coolers are also an environmentally friendly alternative to mains water cooling. The TC immersion coolers are suitable for unsupervised use, for cooling tasks which require continuous cooling or as a variant with temperature control and a Pt100 probe. The models with the type affix "E“ have an LED display with entry of nominal values and regulate with a precision of ±0.5 K. A spiral-shaped or flexible immersion cooling probe made out of stainless steel is available for all models so that fluids can be cooled in virtually all vessel types. The compact housing is made from high quality stainless steel, and is fitted with carrying grips. Universal solution for many cooling tasks Rapid...

The TC range of immersion coolers are a flexible solution for a variaty of cooling tasks. The devices are simple and universally used for rapid cooling of fluids. Typical applications include counter-cooling for heat circulation thermostats or replacement of dry ice. For many applications immersion coolers are also an environmentally friendly alternative to mains water cooling. The TC immersion coolers are suitable for unsupervised use, for cooling tasks which require continuous cooling or as a variant with temperature control and a Pt100 probe. The models with the type affix "E“ have an LED display with entry of nominal values and regulate with a precision of ±0.5 K. A spiral-shaped or flexible immersion cooling probe made out of stainless steel is available for all models so that fluids can be cooled in virtually all vessel types. The compact housing is made from high quality stainless steel, and is fitted with carrying grips. Universal solution for many cooling tasks Rapid...

The TC range of immersion coolers are a flexible solution for a variaty of cooling tasks. The devices are simple and universally used for rapid cooling of fluids. Typical applications include counter-cooling for heat circulation thermostats or replacement of dry ice. For many applications immersion coolers are also an environmentally friendly alternative to mains water cooling. The TC immersion coolers are suitable for unsupervised use, for cooling tasks which require continuous cooling or as a variant with temperature control and a Pt100 probe. The models with the type affix "E“ have an LED display with entry of nominal values and regulate with a precision of ±0.5 K. A spiral-shaped or flexible immersion cooling probe made out of stainless steel is available for all models so that fluids can be cooled in virtually all vessel types. The compact housing is made from high quality stainless steel, and is fitted with carrying grips. Universal solution for many cooling tasks Rapid...

The TC range of immersion coolers are a flexible solution for a variaty of cooling tasks. The devices are simple and universally used for rapid cooling of fluids. Typical applications include counter-cooling for heat circulation thermostats or replacement of dry ice. For many applications immersion coolers are also an environmentally friendly alternative to mains water cooling. The TC immersion coolers are suitable for unsupervised use, for cooling tasks which require continuous cooling or as a variant with temperature control and a Pt100 probe. The models with the type affix "E“ have an LED display with entry of nominal values and regulate with a precision of ±0.5 K. A spiral-shaped or flexible immersion cooling probe made out of stainless steel is available for all models so that fluids can be cooled in virtually all vessel types. The compact housing is made from high quality stainless steel, and is fitted with carrying grips. Universal solution for many cooling tasks Rapid...

68% cotton, 20% polyamide, 10% polyester, 2% elasthane. Specifically developed for athlets (particulary for runners and bikers). Great ventilation by special net-knitting-technique at the back of the feed - allows them to breath! Anatomical rib-knit for perfect fit. With high-quality, traditionally hand linked seams - protects the sensitive toe area. Antibacterially equipped to help avoid athlet's feed and unpleasant smells. 3-pack (one color).  Great price performance ratio! Sizes: 35-38, 39-42, 43-46, 47-50  Colors: black, white (1 color/3-pack) 

78% cotton, 20% polyamide, 2% spandex; or 75% cotton, 22%polyamide, 3% spandex. No more boring socks: men have courage for color now! Hand linked soft seams. Knitted on computer machines. With high-quality piqué cuffs - best possible fit without disturbing gum. No pressure marks! Sizes: 39/42, 43/46, 47/50 - Colors: red, green, yellow, lilac, turqouise, dark-red, fir-green, bordeaux, aubergine, dark-blue (1 color/2-pack). Also available: 6192-5 = 60-pairs-assortment (39/42 + 43/46, all colors; please order 47/49 seperately) at a bargain price!

Technical data Dimensions (L/W/H) approximately 246/113/184 cm Total weight approximately 600 kg Equipment 8-step adjustable inclination of the backrest for indication-dependent positioning (10 steps) Ideal access due to free passage between foot plate and seat cushion Steplessly adjustable shoulder pads for fixing the upper body and ensuring a biomechanically correct movement Foot plate with adjustable angle Variable setting of the start position from the training position High-quality sliding seat with linear guide mounted on ball bearings Training with one leg, comfortable and safe due to adjustable leg support and possibility to suspend the non- trained leg* Integrated storage compartment for aids* * Optional accessories Options 200 kg weight block (20 x 10 kg) Fine weight adjustment 2 kg SmartPanel compass 600 Medical LAN Isolator Position sensors Isometry measuring device Movement limitation Holder for drinks bottle Holder for Zimmer frames Lordosis support Wobble...

The innovative SANHA installation system NiroTherm® combines high-quality NiroTherm® press fittings with a black sealing ring made from EPDM (=ethylene propylene diem rubber) and NiroTherm® stainless steel system tubes. The system is produced from the material 1.4301 (AISI 304). Due to the well-known corrosion resistance of stainless steel, NiroTherm® offers installers therefore a real alternative compared to conventional steels when it comes to closed systems in humid atmospheres such as screed. Since it needs considerably less isolation against humidity*, the installation is faster and labour costs accordingly lower. In addition to the system description, NiroTherm® system press fittings are marked on the outside with a red dot. * This does not affect thermal insulation necessitated by national energy efficiency laws. NiroTherm® system pipe, material no. 1.4301, reduced wall thickness, in 6 m lengths, for cooling, compressed air, heating and industrial applications

Our fittings high quality is based on: – Fittings compatible with PEX pipes without O- Rings – This completely range of fittings is designed in order to offer the most competitive solution for plumbing installations. – Fittings compatible with jaw profiles U and RFz. – Manufactured under the technical standard UNE EN ISO 15875-3.

Our fittings high quality is based on: – Fittings compatible with PEX pipes without O- Rings – This completely range of fittings is designed in order to offer the most competitive solution for plumbing installations. – Fittings compatible with jaw profiles U and RFz. – Manufactured under the technical standard UNE EN ISO 15875-3.

Our fittings high quality is based on: – Patented design PPSU fitting, with three EPDM O-rings and inox sleeves. – Compatible with multilayer pipes. – Compatible with several jaw profiles, such as U, H, TH and RFz for fittings from 16 mm to 32 mm – Jaw profiles U, TH for 40 and 50 mm.

Our fittings high quality is based on: – Patented design PPSU fitting, with three EPDM O-rings and inox sleeves. – Compatible with multilayer pipes. – Compatible with several jaw profiles, such as U, H, TH and RFz for fittings from 16 mm to 32 mm – Jaw profiles U, TH for 40 and 50 mm.

Our fittings high quality is based on: – Brass color fitting with an EPDM O-ring and inox sleeves. – Specially for dimensions of multilayer pipes 20×2,00 mm and 25×2,50 mm. – The most common items for a complete sanitary and heating installations are available in this range – Compatible with multilayer pipes – Fittings compatible with jaw profile U

The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.

The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.

Our fittings high quality is based on: – Modular system: you can make different connections with a few range of fittings. – Stainless steel: all parts are produced by certified stainless steel AISI 316 and AISI 316L. – Dimensions: we cover big dimensions up to 110. – Suitable for drinking water. – Easy assembly: our new design of the profile allows you to introduce the pipe into the fitting easily without extra-efforts.

Our fittings has been designed by our own European Engineers team. We designed an innovative a profile which avoids the risk of damaging the O-rings when the pipe is pushed on to the fitting. Our fittings high quality is based on: – Patented design brass fitting, with three EPDM O-rings and inox sleeves. – Triple safety with three O-rings in the designed fitting. – Manufactured under the technical standards DIN 50930-6 and UNE EN ISO 21003-3. – Compatible with multilayer pipes. – Compatible with several jaw profiles U, H, TH, RFz – Lead free brass available on request.

The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.

The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.

The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.

Our fittings high quality is based on: – Patented design brass fitting, with EPDM O-rings and inox sleeves – Manufactured under the technical standards DIN 50930-6 and UNE EN ISO 21003-3 – Compatible with multilayer pipes – Our fittings are compatible with several jaw profiles: Serie 7 (DN40, DN50, DN63 mm) – TH, U Serie 2 (DN63, DN75 mm) – U – Lead free brass available on request – Fittings starting by article code 2, with not fixed sleeve

Our fittings high quality is based on: – Patented design brass fitting, with EPDM O-rings and inox sleeves – Manufactured under the technical standards DIN 50930-6 and UNE EN ISO 21003-3 – Compatible with multilayer pipes – Our fittings are compatible with several jaw profiles: Serie 7 (DN40, DN50, DN63 mm) – TH, U Serie 2 (DN63, DN75 mm) – U – Lead free brass available on request – Fittings starting by article code 2, with not fixed sleeve

The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.

The innovative SANHA installation system NiroTherm® combines high-quality NiroTherm® press fittings with a black sealing ring made from EPDM (=ethylene propylene diem rubber) and NiroTherm® stainless steel system tubes. The system is produced from the material 1.4301 (AISI 304). Due to the well-known corrosion resistance of stainless steel, NiroTherm® offers installers therefore a real alternative compared to conventional steels when it comes to closed systems in humid atmospheres such as screed. Since it needs considerably less isolation against humidity*, the installation is faster and labour costs accordingly lower. In addition to the system description, NiroTherm® system press fittings are marked on the outside with a red dot. * This does not affect thermal insulation necessitated by national energy efficiency laws. NiroTherm® system pipe, material no. 1.4301, reduced wall thickness, in 6 m lengths, for cooling, compressed air, heating and industrial applications

The innovative SANHA installation system NiroTherm® combines high-quality NiroTherm® press fittings with a black sealing ring made from EPDM (=ethylene propylene diem rubber) and NiroTherm® stainless steel system tubes. The system is produced from the material 1.4301 (AISI 304). Due to the well-known corrosion resistance of stainless steel, NiroTherm® offers installers therefore a real alternative compared to conventional steels when it comes to closed systems in humid atmospheres such as screed. Since it needs considerably less isolation against humidity*, the installation is faster and labour costs accordingly lower. In addition to the system description, NiroTherm® system press fittings are marked on the outside with a red dot. * This does not affect thermal insulation necessitated by national energy efficiency laws. NiroTherm® system pipe, material no. 1.4301, reduced wall thickness, in 6 m lengths, for cooling, compressed air, heating and industrial applications

The innovative SANHA installation system NiroTherm® combines high-quality NiroTherm® press fittings with a black sealing ring made from EPDM (=ethylene propylene diem rubber) and NiroTherm® stainless steel system tubes. The system is produced from the material 1.4301 (AISI 304). Due to the well-known corrosion resistance of stainless steel, NiroTherm® offers installers therefore a real alternative compared to conventional steels when it comes to closed systems in humid atmospheres such as screed. Since it needs considerably less isolation against humidity*, the installation is faster and labour costs accordingly lower. In addition to the system description, NiroTherm® system press fittings are marked on the outside with a red dot. * This does not affect thermal insulation necessitated by national energy efficiency laws. NiroTherm® system pipe, material no. 1.4301, reduced wall thickness, in 6 m lengths, for cooling, compressed air, heating and industrial applications

The innovative SANHA installation system NiroTherm® combines high-quality NiroTherm® press fittings with a black sealing ring made from EPDM (=ethylene propylene diem rubber) and NiroTherm® stainless steel system tubes. The system is produced from the material 1.4301 (AISI 304). Due to the well-known corrosion resistance of stainless steel, NiroTherm® offers installers therefore a real alternative compared to conventional steels when it comes to closed systems in humid atmospheres such as screed. Since it needs considerably less isolation against humidity*, the installation is faster and labour costs accordingly lower. In addition to the system description, NiroTherm® system press fittings are marked on the outside with a red dot. * This does not affect thermal insulation necessitated by national energy efficiency laws. NiroTherm® system pipe, material no. 1.4301, reduced wall thickness, in 6 m lengths, for cooling, compressed air, heating and industrial applications